Design a Facade for a modern educational Institute with a reference architectural plan

  • Status: Closed
  • Prêmio: $100
  • Inscrições Recebidas: 18
  • Vencedor: valeriii

Síntese do concurso

We want to design the facade of our Technical Institute.
The facade should be modern and attractive.
The architectural plan of this technical institute is attached.
If you require to change the plan a little bit to give the facade a more modern and attractive look you can do that.
The construction cost should also be kept in mind that it does not go too high.

Habilidades Recomendadas

Principais inscrições deste concurso

Ver Mais Inscrições

Painel de Comentários

  • polydesign13
    polydesign13
    • 7 anos atrás

    Hi, I would like to post a entry.

    • 7 anos atrás
  • SimoneGrassi74
    SimoneGrassi74
    • 7 anos atrás

    Hi I have a last render to sudmit

    • 7 anos atrás
  • devendrabawdane
    devendrabawdane
    • 7 anos atrás

    Hi: I would like to participate but at the same time I would like to know a bit details about the building. 1) The plinth height if any, 2) Floor height, 3) Does it have a terrace /flat roof/pitch roof? 4) Is there any building line which is to be respected as in can we think of adding external masses to main building? atleast a entrance canopy?

    • 7 anos atrás
  • aminaapajee
    Proprietário do Concurso
    • 7 anos atrás

    It will be a Technology Institute

    • 7 anos atrás
    1. knezjele
      knezjele
      • 7 anos atrás

      Could you leave some feedback on the designs submitted?

      • 7 anos atrás
  • dennisDW
    dennisDW
    • 7 anos atrás

    I send my works from tomorrow

    • 7 anos atrás
  • veritatisde
    veritatisde
    • 7 anos atrás

    which building character you want, is it going to be a technology institute or a nursing school?

    • 7 anos atrás
  • aminaapajee
    Proprietário do Concurso
    • 7 anos atrás

    Keep it the way you want no hard and fast rule so far

    • 7 anos atrás
    1. knezjele
      knezjele
      • 7 anos atrás

      Could you please leave some comments?

      • 7 anos atrás
  • veritatisde
    veritatisde
    • 7 anos atrás

    how about the roof? sorry for asking same question.

    • 7 anos atrás
  • knezjele
    knezjele
    • 7 anos atrás

    Please review entry #7 and comment. Thank you!

    • 7 anos atrás
  • knezjele
    knezjele
    • 7 anos atrás

    Please review entry #5 and comment. Thank you!

    • 7 anos atrás
    1. aminaapajee
      Proprietário do Concurso
      • 7 anos atrás

      I think Its a good attempt but can we do some change to break the monotony of the walls?

      • 7 anos atrás
    2. knezjele
      knezjele
      • 7 anos atrás

      Hi, sure, we can give it a go. So you're after a more "playful" facade rather than a serious one?

      • 7 anos atrás
  • alf3d
    alf3d
    • 7 anos atrás

    La planta que envían para el proyecto carece de un archivo .dwg, importante para el desarrollo del concurso ypor 100 dolares no justifica tener que elaborar también el archivo de autocad.

    • 7 anos atrás
    1. knezjele
      knezjele
      • 7 anos atrás

      creo que el titular del concurso no habla espanol asi que creo que no va a entender su comentario..

      • 7 anos atrás
  • alexandrbuntar
    alexandrbuntar
    • 7 anos atrás

    there is no section of the building. that you attached does little to get what you want.

    • 7 anos atrás
    1. alexandrbuntar
      alexandrbuntar
      • 7 anos atrás

      I wanted to know how many floors the building has

      • 7 anos atrás
    2. aminaapajee
      Proprietário do Concurso
      • 7 anos atrás

      two floors ground floor and first floor

      • 7 anos atrás
  • aminaapajee
    Proprietário do Concurso
    • 7 anos atrás

    Yes it consists of only two levels Ground floor and first floor

    • 7 anos atrás
  • ersaravanakumar7
    ersaravanakumar7
    • 7 anos atrás

    I'm working on it. soon i'll upload the model

    • 7 anos atrás
  • knezjele
    knezjele
    • 7 anos atrás

    Hi there, I'm just wondering if the building consists of only two levels as per your pdf files - ground floor and first floor - is that correct?

    • 7 anos atrás
  • ingdar84
    ingdar84
    • 7 anos atrás

    Hello, can you tell me where Technical Institute is geolocated?

    • 7 anos atrás
  • autocadguy
    autocadguy
    • 7 anos atrás

    What about the roof of the building? Flat roof or a pitched roof?

    • 7 anos atrás
  • aminaapajee
    Proprietário do Concurso
    • 7 anos atrás

    Ok as per the request the contest is sealed now we look forward to receiving outstanding entries. And Yes we just want the facade or the face front of the building to be designed

    • 7 anos atrás
  • archmamun
    archmamun
    • 7 anos atrás

    please sealed this contes.

    • 7 anos atrás
  • SDBcIndia
    SDBcIndia
    • 7 anos atrás

    #increasprize. prize is too much less with respect to the scope of work.

    • 7 anos atrás
  • SDBcIndia
    SDBcIndia
    • 7 anos atrás

    please make it short period.

    • 7 anos atrás
  • SDBcIndia
    SDBcIndia
    • 7 anos atrás

    4 week contest, its too much long.

    • 7 anos atrás
  • sfoche
    sfoche
    • 7 anos atrás

    Hi! Just the front facade right? Could you seal the contest please? Thank you very much!

    • 7 anos atrás
  • aminaapajee
    Proprietário do Concurso
    • 7 anos atrás

    Dear Alexandrbuntar,

    • 7 anos atrás
  • aminaapajee
    Proprietário do Concurso
    • 7 anos atrás

    File with the measurements is added to the brief please take a look

    • 7 anos atrás
    1. wrishitesh
      wrishitesh
      • 7 anos atrás

      Thanks a lot. I'll probably submit by the end of this week.

      • 7 anos atrás
  • aminaapajee
    Proprietário do Concurso
    • 7 anos atrás

    Dear All,

    • 7 anos atrás
  • tomcowell92
    tomcowell92
    • 7 anos atrás

    A set of measurements would be good or a floor plan drawn to scale with either an elevation or section drawn through the building to give a rough idea of the building high and the size of the facades in which you want drawn/ designed also what format would you like the final drawings to be in pdf dwg png jpeg?

    • 7 anos atrás
  • shailendratakale
    shailendratakale
    • 7 anos atrás

    measurements are very necessary please provide measurements thanq

    • 7 anos atrás
  • alemanghi
    alemanghi
    • 7 anos atrás

    It would be great to have a .dwg of the plans to better understand measure

    • 7 anos atrás
    1. wrishitesh
      wrishitesh
      • 7 anos atrás

      Yes, there aren't any measurements visible. Please provide the plans with proper dimensions. Thank you.

      • 7 anos atrás

Mostrar mais comentários

Como começar com concursos

  • Publique seu concurso

    Publique seu Concurso Rápido e fácil

  • Receba muitas inscrições

    Obtenha Toneladas de Inscrições De todo o mundo

  • Premie a melhor inscrição

    Premie a melhor inscrição Baixe os arquivos, é fácil!

Poste um Concurso ou Junte-se a nós Hoje!