Circuit Designers para contratação em Australia

  • Design de Circuito
  • Australia
Sugestões:
mais

Países

Localização específica

Exames

Remuneração por Hora (Dólares)

Avaliação

On-line

Mostrando 44 resultados
  • Contratar     jj8431
Contratar     jj8431

    jj8431 jj8431

    Australia $50 Dólares / hora
    Senior micro-controller engineer (20 years)
    Australia
    6.5
    3 comentários 3 comentários $50 Dólares por hora
    For Australian employers: I'm located in Melbourne, but will be happy to provide electronics design and firmware programming services Australia wide, either remotely or on site. Can work as a contractor and GST invoice can be provided. Some local clients: *** Australian Energy Research Laboratories (AERL)...
    For Australian employers: I'm located in Melbourne, but will be happy to provide electronics design and firmware programming services Australia wide, either remotely or on site. Can work as a contractor and GST invoice can be provided. Some local clients: *** Australian Energy Research Laboratories (AERL) (https://www.aerl.com.au) *** Fibre Optic Cable Pty Ltd (http://fibreopticcable.com.au) *** PayComplete (https://paycomplete.com) *** Extrudinaire Pty Ltd (https://extrudinaire.com) Here is a brief introduction of myself and my career history: Started my micro-controller career 2 decades ago from the 8-bit PIC16C54 and have experienced with a wide range of all kinds of controllers from 4-bit to 32-bit over the years. From bare metal to RTOS, from Arduino to Industrial systems, I can do all kinds of electronics development. Some Key points: *** Arduino: Familiar with Arduino programming and able to create custom Arduino libraries. *** 8-bit microntrollers: Expert of AVR, PIC, MSP430 and 8051 controllers *** 32-bit controllers: STM32 and AT SAMD expert, bare metal or FreeRTOS, programming in C++ and using direct register accessing. *** BLE: Familiar with nRF series and creating applications in C++ *** ESP8266 and ESP32: Using SDK to create applications using C or C++ Experienced in the following fields: BLE, CAN, MODBUS, UART, USB, I2C, SPI menos
  • Contratar jj8431
  • Contratar     GoneEpic
Contratar     GoneEpic

    GoneEpic GoneEpic

    Australia $25 Dólares / hora
    Hardware Engineer
    Australia
    2.9
    1 comentário 1 comentário $25 Dólares por hora
    Hardware Engineer with extensive experience in: Firmware (Atmel and Nordic primarily), PCB design and layout, Design for manufacture, Software including low level communications
    Hardware Engineer with extensive experience in: Firmware (Atmel and Nordic primarily), PCB design and layout, Design for manufacture, Software including low level communications menos
  • Contratar GoneEpic
  • Contratar     JefiServices
Contratar     JefiServices

    JefiServices JefiServices

    Australia $40 Dólares / hora
    Electronics Engineer
    Australia
    0.6
    1 comentário 1 comentário $40 Dólares por hora
    With over 30 years experience in Electronic Design and development, Product design and set to work, Embedded Firmware and Complex Multilayered PCB design. I have extensive experience in DFM (Design for Manufacture), Electronic Assembly and have built an extensive supply chain . I bring multiple skills towards...
    With over 30 years experience in Electronic Design and development, Product design and set to work, Embedded Firmware and Complex Multilayered PCB design. I have extensive experience in DFM (Design for Manufacture), Electronic Assembly and have built an extensive supply chain . I bring multiple skills towards achieving your product development and production goals. menos
  • Contratar JefiServices
  • Contratar     SergeyVK77
Contratar     SergeyVK77

    SergeyVK77 SergeyVK77

    Australia $42 Dólares / hora
    Electronics Engineer and Firmware Developer
    Australia
    4.6
    8 comentários 8 comentários $42 Dólares por hora
    Hardware and Embedded Systems design engineer with over 15 years in the industry. Worked as a lead engineer in various companies sized from small startup groups to S&P-500 listed international corporations. Deep understanding of physics allowed me to successfully design and develop all sorts of electronic products...
    Hardware and Embedded Systems design engineer with over 15 years in the industry. Worked as a lead engineer in various companies sized from small startup groups to S&P-500 listed international corporations. Deep understanding of physics allowed me to successfully design and develop all sorts of electronic products currently operating in different conditions across the world. Good knowledge of digital and analogue electronics, PCB layout, EMC-compliance and electrical safety. I also write firmware in C/C++ with or without RTOS. I specialise mostly in sensors, data acquisition and processing, industrial control and automation, communication interfaces and protocols, SMPS, PCB design, low-power circuits and battery charging, conformance to international standards. My favourite thing is to find elegant solutions to challenging technical problems. menos
  • Contratar SergeyVK77
  • Contratar     oraletlabora
Contratar     oraletlabora

    oraletlabora oraletlabora

    Australia $25 Dólares / hora
    Algorithmic Programmer | Data Analysis | ML/AI
    Australia
    0.6
    1 comentário 1 comentário $25 Dólares por hora
    I have more than a decade's experience in designing and implementing time-critical algorithms in C and C++, and have worked with the London Stock Exchange Group, Microchip, and Oxford Nanopore Technologies. I am quite proficient in analysing large amounts of data, using MATLAB or Python, and deriving novel insights....
    I have more than a decade's experience in designing and implementing time-critical algorithms in C and C++, and have worked with the London Stock Exchange Group, Microchip, and Oxford Nanopore Technologies. I am quite proficient in analysing large amounts of data, using MATLAB or Python, and deriving novel insights. Moreover, I have experience in designing and training neural networks with Python. I pride myself on being a reliable service provider, able to meet even the strictest deadlines. menos
  • Contratar oraletlabora
  • Contratar     ChrisAustralia23
Contratar     ChrisAustralia23

    ChrisAustralia23 ChrisAustralia23

    Australia $25 Dólares / hora
    An engineer in need of a side project
    Australia
    0.0
    0 comentários 0 comentários $25 Dólares por hora
    Previous experience in embedded programming, power electronic design and small signal analog electronics
    Previous experience in embedded programming, power electronic design and small signal analog electronics menos
  • Contratar ChrisAustralia23
  • Contratar     nirmalaranawat
Contratar     nirmalaranawat

    nirmalaranawat nirmalaranawat

    Australia $35 Dólares / hora
    Embedded designer with 7+ years of experience
    Australia
    0.0
    0 comentários 0 comentários $35 Dólares por hora
    Electrical engineer with 7 years of experience in development and delivery of embedded designs in automotive body controls and home automation field. Summary: System design: Complete product development cycle; product requirements capture, developing hardware requirements from system level specifications,...
    Electrical engineer with 7 years of experience in development and delivery of embedded designs in automotive body controls and home automation field. Summary: System design: Complete product development cycle; product requirements capture, developing hardware requirements from system level specifications, cross-functional interaction (Mechanical and Firmware). Project planning, architecture and topology design, trade studies, feature cost analysis. Design for EMI EMC compliance certification and extreme environmental conditions. Subsystem design: Extensive experience in embedded design, component selection for analog and digital boards. Power budgeting, worst case analysis, derating analysis, design tolerance analysis, BOM optimization, circuit simulation and analysis. Developing proof- of- concept, prototypes and mass manufacturable designs considering DFM, DFA and DFT, Change Management with EMS. menos
  • Contratar nirmalaranawat
  • Contratar     esaattia
Contratar     esaattia

    esaattia esaattia

    Australia $80 Dólares / hora
    Embedded Developer , C Programming Developer - C++ Programming Developer - Circuit Design Expert
    Australia
    0.0
    0 comentários 0 comentários $80 Dólares por hora
    I am ready to be hired by you for the post of Embedded Engineer or C/C++ Programming Programmer. I have all the skills and experience that makes me a competitive candidate for this post. I have had an ideal prospect and am ready to accept any new challenges that may be put in front of me. If given an opportunity to...
    I am ready to be hired by you for the post of Embedded Engineer or C/C++ Programming Programmer. I have all the skills and experience that makes me a competitive candidate for this post. I have had an ideal prospect and am ready to accept any new challenges that may be put in front of me. If given an opportunity to work for your company I will fulfil the given work with utmost dedication and loyalty. I also have good experience working with Arduino/C/C++ Programming and Circuit Design. I am ready to start working for you today. menos
  • Contratar esaattia
  • Contratar     chinusankhe
Contratar     chinusankhe

    chinusankhe chinusankhe

    Australia $10 Dólares / hora
    Experienced T&C Engineer
    Australia
    0.0
    0 comentários 0 comentários $10 Dólares por hora
    As a Rail consultant with 3 years of experience, I hold a master's degree in electrical engineering and a bachelor's in Electronics and Telecommunication. Currently engaged in diverse rail projects, my responsibilities span crafting strategy documents, devising test plans, and executing signaling compatibility tests....
    As a Rail consultant with 3 years of experience, I hold a master's degree in electrical engineering and a bachelor's in Electronics and Telecommunication. Currently engaged in diverse rail projects, my responsibilities span crafting strategy documents, devising test plans, and executing signaling compatibility tests. My expertise extends to auditing documents, overseeing bus electrical fire safety inspections, conducting standards reviews, ensuring compliance, and managing testing and commissions. Freelancer.com provides a platform for me to leverage my qualifications and hands-on skills, offering tailored solutions to clients seeking a proficient and versatile professional for their rail-related ventures. menos
  • Contratar chinusankhe
  • Contratar     haziq911
Contratar     haziq911

    haziq911 haziq911

    Australia $30 Dólares / hora
    Research Assistant and Research Student
    Australia
    0.0
    0 comentários 0 comentários $30 Dólares por hora
    I am a research student at Edith Cowan University, Joondalup, working on underwater communication modems. I have worked as an Embedded SOC Developer at Epteck Technologies and currently working as a Research Assistant at AIMES Lab, ECU.I am a research student at Edith Cowan University, Joondalup, working on...
    I am a research student at Edith Cowan University, Joondalup, working on underwater communication modems. I have worked as an Embedded SOC Developer at Epteck Technologies and currently working as a Research Assistant at AIMES Lab, ECU.I am a research student at Edith Cowan University, Joondalup, working on underwater communication modems. I have worked as an Embedded SOC Developer at Epteck Technologies and currently working as a Research Assistant at AIMES Lab, ECU. menos
  • Contratar haziq911

Ei , veja aqui alguns freelancers que estão off-line

Ei , veja aqui alguns freelancers que estão off-line e correspondem ""

Contrate Os Melhores Freelancers com Habilidades Similares