Battery charging trabalhos

Filtro

Minhas pesquisas recentes
Filtrar por:
Orçamento
para
para
para
Tipo
Habilidades
Idiomas
    Estado do Trabalho
    19,782 battery charging trabalhos encontrados, preços em USD

    O objetivo principal é apresentar quais sistemas de armazenamento de energia elétrica com base em baterias Battery Based Energy Storage Systems (BESS). buscando o estado Arte como forma de comparar o que se tem disponível no mercando nacional e internacional. Colher informações sobre de que forma as alternativas de acumulares energia em blocos, com uso de baterias, auxiliam na otimização das instalações de geração, transmissão e distribuição. Propondo melhoria no modelo de especificação para sistemas híbridos de geração de energias renováveis. Desenho do Trabalho. 1 - Introdução 2 - Delimitação do Tema 3 - Metodologi...

    $500 (Avg Bid)
    $500 Média
    3 ofertas

    ...and that the driver chooses when to start / end the event 5) Workday Control. The Driver would be limited within the working hours, not being able to deliver anything after the end of the working day 6) Control of distance traveled and time to each task 7) Option to re-schedule delivery (within the task, have a button to re-schedule the delivery to the customer) 8) Make the app work even though battery saving mode is on 9) Panic button - to use in case of emergency Example of project: IBOX Espanol Tenemos una aplicación de control de entrega. Necesitamos mejorar para que funcione sin conexión. y también mejorar la cuestión del control de desplazamiento (GPS) tales como el control de velocidad y otras mejoras Necesitamos los siguientes puntos: 1) H...

    $2000 (Avg Bid)
    $2000 Média
    1 ofertas

    ...der um custo baixo se possível e eficiência. the project is for student purposes. I want a program that control four stepper motors, 4 engines have to get together 20kg in total. The motors have to rotate 360 ° forward and backward. They will be controlled by remote control radio. I would like to know which components to use anger in the project, which the voltage source to use it, and a battery that lasts a long time. The project has to give a low cost if possible and efficiency....

    $87 (Avg Bid)
    $87 Média
    8 ofertas

    ...pessoal, que pode ser facilmente transportado em ônibus ou metrô especificações: Max Speed: 15kmh Distância ao redor 13-20km (depende do peso do piloto, as condições das estradas, etc.) Max inclinação em torno de 15 ° -30 ° (depende do peso do ciclista) Battery 36V 4.4AH * (158WH) LG bateria de lítio da marca mais alta 500W de potência Usando temperatura de 10 graus centígrados -40 graus centígrados (recomendando a 10 graus centígrados -30 graus centígrados) de carga máxima 120 kg Engin 350W Charging AC110-240V tensão 50-60HZ Tempo de carregamento Cerca de 60-120 Mins proteção Velocidade 10 kmh (conter) -15km...

    $6 - $17
    $6 - $17
    0 ofertas

    Possuo um laptop "Razer Blade" e preciso de uma bateria para substituir a original que foi danificada (a bateria não tem como ser reparada, precisa realmente ser trocada). Segue as especificações: NOTEBOOK - Razer Blade @ 2013 -Model No.: RZ09-0102 -Rated 19V === 7.9A -Product No.: 01021101 BATERIA - Li-ion Battery Voltage: DC 11.1V Capacity 6400mAh watt-hour rating: 71.04Wh Operating Temperature: 0ºC-45ºC A bateria tem que ser a padrão do notebook pois ela é interna e não externa. Segue em anexo fotos para mais detalhes. O QUE EU QUERO PARA O SERVIÇO: que encontrem onde a bateria poderá ser comprada, independente de ser em loja no Brasil ou exterior (website), mas que entregue em BRASÍ...

    $13 (Avg Bid)
    $13 Média
    1 ofertas
    Projetar um produto Encerrado left

    ...Token para conexão entre carregador e device. UC-KEY na foto --------------------------------------------------------------------------------------------- Charger for mobile / tablet with Bluetooth communication Fixed device charger then 110 ~ 220V Output 5VDC for portable devices with controlled current 1 to 2.5A with through BT communication with the device. Mobile device Internal battery charger 5VDC Output for portable devices with controlled current 1 to 2.5A with through BT communication with the device Token connection between charger and device. UC-KEY in the picture_...

    $2351 (Avg Bid)
    $2351 Média
    10 ofertas
    Crie um Website -- 2 Encerrado left

    The application overview (web and mobile - iOS and Android) The main idea of this platform is to permit people to offer their services through it, and consumers to ask for products or selecting one of the products available on a given day. 1. Home Screen View brief input display while charging the system. Options: 1.1 Screen for new user registration, either supplier or consumer. 1.2 OR geolocation screen, if the user is already registered and go automatically access to the registered data. 2. Options, on the same screen, for: 2.1 Delivery of products - by clicking on this screen, you should see another screen with product features, value, date and approximate time for delivery, photos of the product to be delivered, the supplier photos and your workplace, the s...

    $12 / hr (Avg Bid)
    $12 / hr Média
    6 ofertas

    Hello, My site is I have a news site in joomla 3.2 platform, and whenever we have more than 200 hits at the same time, the MySQL server is unavailable. I have a VPS plan at BlueHost enhanced with the following configuration: 4 Core CPU 8 GB RAM CentOS 6 When the site is running, the charging time is too high. The home page takes 20 seconds to load. I also use Cloud Flare tool. I need to optimize the site to avoid this overhead on the server, and allow faster loading of pages. ------------------------- Olá, Meu site é Tenho um site de notícias na plataforma joomla 3.2, e sempre que temos mais de 200 acessos ao mesmo tempo, o servidor Mysql fica indisponivel. Possuo um plano de VPS avançado na BlueHost com a segui...

    $171 (Avg Bid)
    $171 Média
    4 ofertas

    Eu tenho trabalho contínuo relacionado ao nosso projeto anterior 2 circuits: shunt resistor and rechargeable battery to Arduino microcontroller'

    $71 (Avg Bid)
    $71 Média
    13 ofertas

    Eu tenho trabalho contínuo relacionado ao nosso projeto anterior 2 circuits: shunt resistor and rechargeable battery to Arduino microcontroller'

    $10 / hr (Avg Bid)
    $10 / hr Média
    1 ofertas

    I need an expert android developer to develop a program that can be installed in android tablets. 1-The function is when the tablet gets power through the charging cable the tablet boots up. 2- Once booted it loops a video 3- When the charging cable looses power the tablet powers down. (Also I want the battery not to be charged) I have had 5 devs fail at this task so far so want experienced people only. I will need an apk file to install

    $250 (Avg Bid)
    $250
    0 inscrições

    I like to have a online backgammon website som included in: 1. Registration 2. Charging account by crypto and cash out by crypto 3. Different tables , players can play free or different prices levels 4…. Etc

    $1166 (Avg Bid)
    $1166 Média
    32 ofertas

    ...am working on. What I want you to do is to check the files that I have already made using Nextion Editor and Arduino to talk to each other. I'd like you to check them, improve them in terms of looks, operation and help me with what's undone. Basic idea is we have a display and Arduino and we want them to talk to each other all time and make the changes on Arduino side, I also have an I2C based battery fuel gauge IC so I'd like you to help me to track it's SOC as well. If you are someone who has worked with Nextion Displays and can do this, kindly bid. I'd prefer it if you have the display at your end and can test the firmware on Arduino and test the HMI interface on the display parallely. Looking forward to hear from you. If possible, please share yo...

    $95 (Avg Bid)
    $95 Média
    8 ofertas
    PCB design 6 dias left

    Design PCB layout for small device. Features list: USB connector to charge battery. Charging circuit to charge battery. On/off button Drive LEDs for 5-10 minutes

    $258 (Avg Bid)
    $258 Média
    12 ofertas

    Need 5 photorealistic renderings to create conceptual design from our examples of electric charging stations

    $122 (Avg Bid)
    $122 Média
    57 ofertas

    Hey Guys, Our company needs Rockstars to join our Sales Development Team! We offer very competitive salary & incentives! Our company is based in Germany. We are a large battery trading and white label product selling company for B2C and B2B within Europe and we love to work with talents as we make our expansion. Your role as Sales Development Representative is relatively a sales role who specializes more on the following: - Existing customer care (B2B) - New customer acquisition (focus on mailings) - Participation in public tenders (not a must) - Creation of discount campaigns for existing customers and reactivation of old customers - Focus on B2B and B2G - Any other reasonable, assigned tasks deemed necessary to the operation of the business. What days/hours will I work...

    $568 (Avg Bid)
    $568 Média
    13 ofertas

    I need an Android App which will run over Modbus over RTU serial port and display the battery parameters on the screen. The app will be of 2 screens. The first one will display the logo and the second one will display the data. I've shared the pictures and required documentation The app needs to be created in 3 days.

    $16 / hr (Avg Bid)
    $16 / hr Média
    16 ofertas

    Hi I am looking for the front and backend developer for the below project: 1. Coach fitness training and content 2. Language Center - content, test and level Service is needed over the WAP, SMS & USSD by teleco payment (API for charging will be provided, USSDGW will be provided. and i will help him on the flow as well even in USSD.

    $862 (Avg Bid)
    $862 Média
    36 ofertas

    Complete firmware and software development for our battery-powered wireless camera sensor, which uses stm32h743 series MCU, with AI classification capabilities. Hardware will have PIR detector, OV5640 camera, external SDRAM and QSPI flash, 868MHz LoRa transceiver, IR cut filter and IR LEDs, vibration sensor, voltage regulators, SD card, debug /programming port etc. LoRaWAN specification v1.0.3 will be used to send classification results to our handheld terminal with gateway and ChirpStack Network and Application server running on it. Developer will be responsible to develop complete code which includes test software for the designed hardware, firmware and software that will run on the board, deep learning AI model that will run on the board, LoRAWAN v1.0.3 with specific payload for ...

    $4149 (Avg Bid)
    $4149 Média
    11 ofertas
    Minielly Cottage Build 5 dias left
    VERIFICADO

    Project scope includes the demolition of an existing cabin (to floor/foundation) and reconstruction of a timber frame cottage using the same footings except where the building is being made larger (new footings). The cottage is water access and off-grid. Power is provided by a solar/battery setup. Propane fuels the hot water heater and oven. A new septic tank and bed are being installed. We (Voyageur Backcountry Construction) are looking for assistance with the mechanical design and drafting for plumbing (incoming water & drainage), gas (location of propane regulator and lines), and electrical layout (only from existing AC panel throughout house). There may also be an opportunity to assist us with the non-structural framing & insulation components of the job and othe...

    $22 / hr (Avg Bid)
    $22 / hr Média
    20 ofertas

    ...(metal ingots, billets, blooms, slabs, sows). Scrap metal is a waste metal - Description of semi-finished metal casting products - Examples of metal recycling plants can be found here in our online directory – Important notes: 1) we don’t accept battery recycling plants – those are plants which make metal ingots from batteries; 2) we don’t accept primary metal manufacturing plants – those which make metal ingots from metal ore, rather than scrap metal; 3) we don’t accept plants which manufacture finished metal products from metal scrap – such as metal sheets, rods, coils, rebars, etc. 4) we don't accept plants which work only with precious metals

    $18 (Avg Bid)
    $18 Média
    31 ofertas

    ...======================== Once the STAGE 3 is working well, the next stage will be, using APIs for multiple e-trade stock exchange platforms (like stock, penny stocks, cryptocurrency stocks, foreign currency stocks e-trade platforms, etc), as not all platforms allows trading ALL types of stocks, automatically trade (buy and sale) stocks base on the peeks as per STAGE 3 In order NOT to drain battery of iOS device, the core work can be done in a server/computer and iOS will have only dashboard and managing interface ***THIS PROJECT WILL BE DONE IN STAGES ***THIS IS NOT AN ALL OR NOTHING PROJECT. YOU CAN BID ON JUST ONE OR MORE STAGES. ***PLEASE PROVIDE TIME OF COMPLETION AND PRICE PER STAGE...

    $714 (Avg Bid)
    $714 Média
    31 ofertas

    I need an Android App which will run over Modbus over RTU serial port and display the battery parameters on the screen. The app will be of 2 screens. The first one will display the logo and the second one will display the data. I've shared the pictures and required documentation The app needs to be created in 3 days.

    $17 (Avg Bid)
    $17 Média
    2 ofertas

    ...tracking) d. Front Doors Opening/closed e. Fuel Cube Access (who & when) f. Fuel Cube Locked/unlocked g. Fuel Cube Lid Left Open Alarm (Audible) h. Fuel Cube Bund Alert i. Low Battery Voltage Warning 2 - Remote Viewing a. Useable Fuel Levels –When running external equipment – e.g. pumps & generators. Unnecessary refueling visits can also be eliminated, saving customers time, money & Co2 (tanker vehicles) b. Fuel Temperature c. Sensors Status, e.g. doors open/closed and fuel lid lock status d. Current Location (including when in transit) with detailed address, GPS co-ordinates and street view e. Battery Voltage f. Last person who accessed the fuel cube 3 - Remote Access a. Remote unlocking capabilities (Fuel Lid) for tanker driver acc...

    $47 / hr (Avg Bid)
    $47 / hr Média
    19 ofertas

    ... e. Fuel Cube Access (who & when) f. Fuel Cube Locked/unlocked g. Fuel Cube Lid Left Open Alarm (Audible) h. Fuel Cube Bund Alert i. Low Battery Voltage Warning 2 - Remote Viewing a. Useable Fuel Levels –When running external equipment – e.g. pumps & generators. Unnecessary refueling visits can also be eliminated, saving customers time, money & Co2 (tanker vehicles) b. Fuel Temperature c. Sensors Status, e.g. doors open/closed and fuel lid lock status d. Current Location (including when in transit) with detailed address, GPS co-ordinates and street view e. Battery Voltage f. Last person who accessed the fuel cube 3 - Remote Access a. Remote unlocking capabilities (Fuel Lid) f...

    $411 (Avg Bid)
    $411 Média
    51 ofertas
    HW op-amp circuit 3 dias left
    VERIFICADO

    A hardware development is required. Sensor used for input: piezoelectric Microcontroller used to receive the amplified sound: ESP32. Output voltage range: 0-3.3V. Midpoint Bias near V=1.65V Operational Amplifier model: we will define it before start the project. Battery used: 1x3.7V or 1x9V Software to use: KiCad. Any other software for simulate it (for example LTspice).

    $46 (Avg Bid)
    $46 Média
    12 ofertas
    Progressive Web App 3 dias left
    VERIFICADO

    We are looking for help in designing and building a responsive web app which presents information to users relating to their energy trading. Users/subscribers will have on-premises battery storage facilities and the app is designed to provide them with information to help them decide whether and when to sell back to the grid. The data is already preconfigured and provided via JSON. The app can be built in php or node.js and we would own the IP and source files on completion of the project. Scope of the project > "Some" graphic design. The first stage of this project is in building an MVP. If the launch is successful then more attention will be paid to the design and the app will be developed, requiring more input from subscribers. > SCSS files - output from the gra...

    $3925 (Avg Bid)
    $3925 Média
    137 ofertas

    Its an Battery services to the customer

    $14 / hr (Avg Bid)
    $14 / hr Média
    39 ofertas

    ...should be made with a 3D DESIGN SOFTWARE. Simply combining/cropping sample pictures attached to this description will not work. I am looking for innovative 3D designs as shown in the sample cover image. ANOTHER IDEA FOR THE COVER IMAGE One can also illustrate our research by presenting the metal foam electrode described above in the center on a dark background. This electrode is part of a zinc battery that can power on a lightbulb connected through a cable. See example attached (title sample cover image 2)....

    $120 (Avg Bid)
    Destacado Garantido
    $120
    36 inscrições
    Trophy icon Business Card Design Encerrado left

    Design Two New Business Cards For: Westrock Battery Limited Key Info To Display On Cards: Batteries For Everything, Solar/Lithium Energy MFG, EV/Golf Cart Sales & Service & DC Power Products Card One: Jason Osadac Energy Storage System (ESS) Specialist Card Two: Robin Friesen EV/Golf Cart MasterTech

    $18 (Avg Bid)
    Garantido
    $18
    223 inscrições
    High RPM cleaning mechanism 2 dias left
    VERIFICADO

    This mechani...with more than 350 RPM using a brushed DC motor. The brush is approx 15 feet long and its weight is around 8 kg. The brush is made of a hollow square aluminum pipe having microfiber clothes mounted on it. It is expected by the freelancer to select a cost-effective motor(it must be 12v) and build a cost-effective mechanism to achieve this RPM. The system will be battery-operated and voltage, current and battery limitations(of battery) must be considered during motor selection and mechanism designing. Freelancers must consider the easy and cost-effective ways of fabricating of mechanisms for production. Microfiber flap length: 10cm - 20cm Operating voltage & current : 12v, 8amps Note: Checkout attachments for more details. Further details can be prov...

    $474 (Avg Bid)
    $474 Média
    17 ofertas

    looking to create 2 types of (sign up / login) portals in my website. One for the carriers and one for the shippers. The carrier's portal shows the carrier info, load he is moving, tracking the driver, showing payment he is getting for each load. The other portal is for the shipper, the portal will show the shipment information the customer is looking to ship, shipper information, charging the shipper. The company admin will have the ability to assign the load from the shipper portal to the carrier in the carrier's portal

    $156 (Avg Bid)
    $156 Média
    66 ofertas

    I need to recreate this web* with this product**. * ** I have already a logo but it will be better to modify it a bit. Steps: 1- Logo soft modification 2- Logo in bottle battery product 3- Flyers and posters 4-Web design in shopify Thank you.

    $138 (Avg Bid)
    $138 Média
    62 ofertas

    Hi Rupa G., i found you here and have a look in your portfolio. I am looking for a Logodesign. It is a Battery Management System, to build Energy Storage systems with second life batterys from electric vehicle. Best regards from Germany Florian

    $36 / hr (Avg Bid)
    $36 / hr Média
    1 ofertas

    I need you to make a small project for me which consists of an LCD and STM32 microcontroller (an optional bluetooth) a matrix keypad an...keypad and L9637D or similar chip I will provide keypad schematics and also the lcd datasheet Upon completion of the PCB you need to make a simple test program (menu controlled by keypad to show up in LCD to send some data on the L9637D chip trough uart) The PCB will be running on battery and will also have a second power supply If the second power supply is active then the battery should be disconnected since the battery voltage will not be similar to the supply voltage The PCB should stay off when on battery and turned on by a button on the keypad and shut down after 1min its not beeing used Please give a approximate price...

    $83 (Avg Bid)
    $83 Média
    17 ofertas

    Hi, We have already crea...from Prototyping Boards) with predefined maximum dimensions: 1 x Micro USB-B Socket for Powering and Programming (wich should overlap the PCB to integrate into housing) 2 x LED-Outs (accessible via GPIO) 1 x Screw-Terminals (for each HX711, with E+, E-, A+ A- ) 4 x Mounting holes 1x I2C Pinout 1x 3.3V / GND Pinout 1x 5V Pinout for HX711 1x 2x16 LCD Display Optional - Connector for LiPo (charging trough Micro USB-B Socket) - I2C Display - Microswitch for Programming (beside the USB-B Socket, accesibel trough pin-hole) The PCB should not exted the dimesion 5x10cm. I need complete files for PCB etching and assembly (BOM, Gerber, Schematics) EasyEDA would be great if possible. However couldbe in Eagle or any other Software. Thank you for your Bi...

    $128 (Avg Bid)
    $128 Média
    13 ofertas

    ...have a little electrical experience and no experience in remote control. I would need parts list preferably from Amazon I would need to control the motor speed, forward and reverse. I would need to control the steering with an actuator. The motor should stop and steering centred when joystick released. It should have a 6mm sprocket with 11 teeth and be brushless I would need a battery level indicator and charging point. Key to turn on/off A kill switch on remote controller and top of train to stop all functions. You should provide simple instructions/drawings on how to connect the parts. From my research I believe an arduino would be used and would need to be programmed. I would need support to do this. Your part of the project is to identify parts and how they connect...

    $229 (Avg Bid)
    $229 Média
    17 ofertas
    bulk url shortener -- 3 4 horas left
    VERIFICADO

    ...request the creation of a script that can be registered in bulk. the features you need 1. Member registration 2. Mass creation by multi-registration or uploading a .csv file with .url entered Even if it is the same url, the hash value of short url is registered differently. 3. Simple access statistics (only clicks) 4. Export to .csv file after creation I'm a business and I'm also charging taxes. Marketing companies issue coupons to members in bulk, and at this time, they create a large number of different event links and distribute them to members. In this case, a short link is required. It is never intended for simishing or phishing. If you send me a message, I will tell you my site. I would like to know if it is possible to customize it. If possible, ...

    $20 / hr (Avg Bid)
    $20 / hr Média
    21 ofertas
    bulk url shortener -- 2 4 horas left
    VERIFICADO

    ...resolved. So, we request the creation of a script that can be registered in bulk. the features you need 1. Member registration 2. Mass creation by multi-registration or uploading a .csv file with .url entered Even if it is the same url, the hash value of short url is registered differently. 3. Simple access statistics (only clicks) 4. Export to .csv file after creation I'm a business and I'm also charging taxes. Marketing companies issue coupons to members in bulk, and at this time, they create a large number of different event links and distribute them to members. In this case, a short link is required. It is never intended for simishing or phishing. If you send me a message, I will tell you my site. I would like to know if it is possible to customize it. If possibl...

    PHP
    $250 (Avg Bid)
    $250 Média
    5 ofertas

    I need to recreate this web* with this product**. * ** I have already a logo but it will be better to modify it a bit. Steps: 1- Logo modification 2- Logo in bottle battery product 3- Flyers and posters 4-Web design in shopify Please submit ONLY ONE POST WITH IMAGES EACH CONTESTANT . Thank you.

    $103 (Avg Bid)
    Garantido Concurso Top
    $103
    457 inscrições

    Hello there, Im looking for a ReactJS developer to create me a "Quote System". We are offering security services and are charging by the hour, therefore we want to give customers a series of questions, and based upon those answers - they will get an Instant Quote shown to them on the final screen. Our base charge (for example) would be £120/hour. This value would change according to the answers chosen from our small list of questions. How much is this going to cost? We have a budget of 250

    $295 (Avg Bid)
    $295 Média
    1 ofertas
    Arduino programming Encerrado left

    Hi i'm looking for help for my next project. I´m working on a "board game" that work with 3 electronic dice. I see a similar project in arduino webpage ( ) but i need to connect to a smartphone and a special reader. Also, i need to add a lipo battery and wireless charger.

    $203 (Avg Bid)
    $203 Média
    12 ofertas

    i need to design a lora device. it should have a lcd to display a value . it should be battery operated and it should have battery backup for 6 months

    $1025 (Avg Bid)
    $1025 Média
    18 ofertas

    I need the help of an expert of a product developer with DC_DC battery solutions who can provide prototypes of what i want for a battery tester, both hardware and software designs and can ship to us and has the required experience to do this

    $505 - $1011
    Destacado Secreto
    $505 - $1011
    16 ofertas

    battery equalizer is suitable for lead-acid batteries. It canwork when the voltage is higher than 5V, that is, the battery equalizer can be usedfor batteries with a single battery in the range of 5V-18V, and any number of batteries canbe connected in parallel or series. The battery equalizer can be installed in multiple parallel connections, and can be used with 6 V12V 48V 60V 72V 96V 110V 220V 240V batteries. Each battery equalizer corresponds to 2 batteries.Rail-type buckle installation, can easily install the moduleinthe distribution box. Two pairs of battery connection terminal wires and one pair of parallel wiring are included in the product package, which is convenient for customers to install quickly. Before installing the Battery equ...

    $121 (Avg Bid)
    $121 Média
    8 ofertas

    Help me "translate" this library: from Arduino Due to ESP32 I have few Tesla batteries with the integrated BMS, also the connectors, etc, so I can test the setup in real time. However, I do not have the know-how to port this library to the ESP32. I would need most importantly at least the following functionality: - read each "cell" voltage from the battery module (7S) - read the temperature - read the fault codes (if any) - start/stop the balancing Please read the description on the github page, also there are several hints here: Thanks! best regards,

    $197 (Avg Bid)
    $197 Média
    15 ofertas

    I need an android transport app for motorcyclists whom i will be charging a monthly or daily fee to use the app, and the clients too will pay a small amount to access the service.

    $355 (Avg Bid)
    $355 Média
    88 ofertas

    We are looking for a BMS solution for Li-Cells 12Cells and above. We are open to work with Firmware who has already any BMS firmware and we are also open to buy a solutions if anyone has one ready. BMS IC should be either from STMicroeletronics, TI and Analog Devices. Please apply here if you have already worked on any of the BMS system.

    $336 (Avg Bid)
    $336 Média
    10 ofertas

    Large project to be designed. Preferably vitron equipment but we are in your hands. 100kw system 225 390w solar pannels. 200kwhr of battery storage needed

    $551 (Avg Bid)
    $551 Média
    22 ofertas