Hypermesh dyna trabalhos

Filtro

Minhas pesquisas recentes
Filtrar por:
Orçamento
para
para
para
Tipo
Habilidades
Idiomas
    Estado do Trabalho
    204 hypermesh dyna trabalhos encontrados, preços em USD

    Projeto de Máquina para Lavanderia Industrial Trata-se de uma máquina de Lavanderia industrial já está no mercado há 10 anos, com projeto superdimensionado tanto em sua estrutura metálica, bem como carenagem e fechamentos. Precisamos otimizar este projeto de modo a reduzir no mí...fechamentos. Precisamos otimizar este projeto de modo a reduzir no mínimo 20% em matéria prima. Para isso, buscamos um engenheiro mecânico que esteja atuando na área de projetos com análise Estrutural e Dinâmica com experiência de no mínimo 5 anos baseados no Método dos Elementos Finitos – CAE (Computer-Aided Engineerig) utilizando os softwares consagrados como: Ansys, Nastran, Patran, &...

    $1313 (Avg Bid)
    $1313 Média
    2 ofertas

    two cad models to be meshed in plastic and 2d shell mesh in hypermesh

    $24 (Avg Bid)
    $24 Média
    4 ofertas

    ...Criterion (TCFC) and Tibia Index (TI), based on the compressive force of tibia bone in the leg. o Conduct simulation within LS-DYNA or Ansys software. o Provide software copy of all the project file(s) when complete. o Provide full documentation explaining in details all the results and how to re-generate these results. o These should be reported in 3 milestones. • We will supply acceleration-time input data, as well as initial velocity. This is based on crash simulations of our vehicles. • This should be straight forward for someone with experience in automotive crash safety FEA simulations. Optimally, you are experienced in one or more of the following: Ansys, LS-DYNA, LS-Prepost, ANSA, Oasys Primer, Altair Hyperworks, Radioss, Abaqus, Explicit Dynamics, FAE. ...

    $528 (Avg Bid)
    $528 Média
    7 ofertas

    We need to get electric vehicle components analysed using Hypermesh and Nastran platform. Analysis required: Static structural, transient, frequency and fatigue.

    $3 / hr (Avg Bid)
    $3 / hr Média
    11 ofertas

    how to do lattice optimization in hypermesh software

    $15 - $25 / hr
    $15 - $25 / hr
    0 ofertas
    Foldable e bike -- 2 Encerrado left

    I need analsis part to my project by using ansys software and hypermesh

    $274 (Avg Bid)
    $274 Média
    9 ofertas

    A biomechanical mesh model needs to be set to simulate physiological conditions from the includes setting a fiber orientation also

    $123 (Avg Bid)
    $123 Média
    3 ofertas

    Mô phỏng động lực học vi sai bằng phần mềm Ls Dyna

    $10 - $30
    $10 - $30
    0 ofertas

    ...The firm is 100% employee owned which means we have full independence in making decisions about our future and the clients we work with. Oasys is the software house of Arup. Under the Oasys brand we develop the Oasys LS-DYNA Environment and, as Ansys Channel Partner, we distribute the LST/LS-DYNA software in the US. LST/LS-DYNA is a complex engineering software used for simulation in automotive, nuclear and civil engineering industries. Role We are looking for an Inside Sales Representative to work with us on a contract basis to increase and shape our LST/LS-DYNA business. Our Inside Sales Representative will be assigned a geographical territory and will have the responsibility to develop accounts and drive sales activities from initial contact t...

    $33 / hr (Avg Bid)
    Local
    $33 / hr Média
    3 ofertas

    Request details I aim to combine GCNv2 SLAM with DYNA SLAM for a personal project. Deliverables A desktop runnable without UI or any visual application.

    $36 (Avg Bid)
    $36 Média
    1 ofertas

    I am an employee of a engineering services company located in Germany. I want the above task mentioned to be done for my project purpose.

    $492 (Avg Bid)
    $492 Média
    9 ofertas

    I want to simulate the Direct metal deposition or Cladding of single metal layer over a substrate using COMSOL/ or/HYPERMESH/ or ABAQUS/or ANSYS /or 3D flow to find the temperature profile and clad dimensions.

    $17 (Avg Bid)
    $17 Média
    2 ofertas

    ...Ansible Towerwhich is the entry point for Ansible provisioning, where the automation is defined through tasks using YAML format. Run Ansible Scripts to provision Dev servers. Experience working with JAVA EE 6 compliant IDE's including Eclipse, My Eclipse 4.x, WSAD 5.x, NetBeans 6.x, wed stokes and mobile technologies like Android. Expertise in Hibernate , Docker , Jenkins, Azure, EMR, Apigee, Splunk, Dyna Trace Management toolsand a webcommerce like ATG . Competence in using Java IDE tools like my Eclipse, Eclipse, STS, Net beans to develop dynamic web applications . Experience in creating alarms and notifications for instances using Cloud Watch. Developed and executed software systems utilizing JavaScript, CI/CD, Mean Stack, Groovy, BOOTSTRAP 3 and Springboot . Development ...

    $642 (Avg Bid)
    $642 Média
    28 ofertas

    I am seeking an expert in HyperMesh who can do FRP strengthening (longitudinal, hoop directions and layered FRP) on a beam model which I have.

    $13 / hr (Avg Bid)
    $13 / hr Média
    3 ofertas

    I am seeking for someone who is an expert in the field on Hypermesh and LS-Dyna software for modelling and simulation of slab and beam under impact and blast.

    $14 / hr (Avg Bid)
    $14 / hr Média
    10 ofertas

    Ashok Kumar N.P Total Experience: 9+ years (4+years in full vehicle integration and 5 in Analysis (Abaqus) CARRER OBJECTIVE To work in a dynamic and growth stimulating environment, which provides ample opportunity to utilize and enhance my skills and to add value to the products and services on which I undertake the assignments. Educational Qualification Industrial Production Engineering from A.I.T Institute of Technology, CHICKAMAGLURU affiliated to VTU Belgaum. Summary of experience Experience in linear and nonlinear (contact, material, geometry) structural analysis, modal analysis. 9+ years of experience in automotive domain in different sub systems like Front Fascia Rear Fascia, Front Grille, Front and Rear wheel flares, FEM, Cladding and Side sill. Very good hands...

    $1036 - $2072
    $1036 - $2072
    0 ofertas

    Analysis of a shoe while running... observe the deformation

    $9 (Avg Bid)
    $9 Média
    6 ofertas

    We have developed and designed a device. This device contains a material inside and needs to be type approved for transport. For getting the type approval, simulation tests needs to be performed. With above background we request you to quote for the following simulation tests, 1. Thermal test: Heat the device at 800 deg Celsius for 30 minutes 2.A. Drop test 1: 9 m drop test. 2.B. Drop test 2: The package is dropped from height of 1 m onto a steel bar of (15 +/- 0.5) cm in diameter of length 20 cm required fixed on the hard target surface. The weight of the device is 435 kg.

    $2498 (Avg Bid)
    $2498 Média
    13 ofertas

    Urgently required CAE Engineer having 3 to 6 years of experience of working on LS-Dyna / Ansa / Hypermesh analysis platform for automotive seating seating domain. Job location : our office in Shivajinagar, Pune ** work from home option is also available. Computer and software license will be provided for WFH.

    $1281 (Avg Bid)
    $1281 Média
    2 ofertas

    Construct an impact analysis of a ball penetrating various plates. Aluminum, platinum, and gold will be the different materials used for the plates and steel for the ball. The ball will travel...analysis of a ball penetrating various plates. Aluminum, platinum, and gold will be the different materials used for the plates and steel for the ball. The ball will travel at a velocity of 100 m/s through the plate with the thickness of 0.25, 0.5, and 1 inch for each material used in order to test which plate better absorbs the impact. Charts comparing the plate's performance will need to be made. LS Dyna software required. To model penetration you will need to enable material failure. Pay attention to the failure criteria in the plate to make sure it matches the ultimate strain of the...

    $219 (Avg Bid)
    $219 Média
    8 ofertas

    Construct an impact analysis of a ball penetrating various plates. Aluminum, platinum, and gold will be the different materials used for the plates and steel for the ball. The ball will travel...analysis of a ball penetrating various plates. Aluminum, platinum, and gold will be the different materials used for the plates and steel for the ball. The ball will travel at a velocity of 100 m/s through the plate with the thickness of 0.25, 0.5, and 1 inch for each material used in order to test which plate better absorbs the impact. Charts comparing the plate's performance will need to be made. LS Dyna software required. To model penetration you will need to enable material failure. Pay attention to the failure criteria in the plate to make sure it matches the ultimate strain of the...

    $30 (Avg Bid)
    $30 Média
    4 ofertas
    Trophy icon Naty Naty social media logo Encerrado left

    In a search of a social media logo for a personal blog. I currently ride a Harley Davidson Dyna Low rider as seen in the picture above and would like my followers to connect with me through my logo. I would like my user name to be included with the logo @nat_munoz88 I would like the picture to be use as a silhouette.

    $30 (Avg Bid)
    $30
    62 inscrições

    The main idea of the project is to analyze the neck injuries of a rearseat occupant(dummy body) of a car when a rear collision occurs. There are two types of collisions of to be analyzed like rear impact offset and rear impact oblique offset collision.

    $8 - $15 / hr
    $8 - $15 / hr
    0 ofertas

    I have a geometry assembly of Rail and wheel in CAD. You task is create the meshing using some reference images and ANSYS files (I have the meshing made in ANSYS APDL). The project outcome is to provide the mesh file in ".bdf" format using First Order Element. The ".bdf" file should be able to import for Ansys Workbench"

    $114 (Avg Bid)
    $114 Média
    4 ofertas

    Evaluation of mechanical impact response in human body models

    $245 (Avg Bid)
    $245 Média
    2 ofertas

    Project Information: I am working on a project where I have a large number (up to 2,000) stereolithography (stl) triangulated meshes of human arteries (anonymous). I have developed a framework (relatively simple) in HyperMesh where I import these files, apply some 2D triangular remeshing, organise the components, produce a 3D Tetra Mesh, so that these models are ready for Fluid-Structure Interaction simulations. I am looking for someone willing to produce as many of these models as possible (long-term project). Each model takes between 0.5-1.5 hours to create, once you are used to the procedure. I have written down all the steps to build my models, with further details on parameters etc at each step, so it is simply a case of following the steps. Please get in touc...

    $4 / hr (Avg Bid)
    Destacado ADC
    $4 / hr Média
    2 ofertas

    Looking for the experienced Hyperworks and Hypermesh experts. Please only apply to this job if you’ve dealt with such kind of tasks before. Thanks.

    $4 / hr (Avg Bid)
    $4 / hr Média
    3 ofertas
    mechanical design Encerrado left

    cad Catia hypermesh. Andy's solid work

    $4269 (Avg Bid)
    $4269 Média
    6 ofertas

    Installation of two shade canopies on the external wall (brick masonry) of house. This will be a two man job and require a 4m ladder. Freelancer keeps rejecting this post without extreme detail so forgive the ridiculous level of detail. Unbox the first canopy. Read instructions. Assemble the...Open your ladder and place in position. Climb to second level of house where canopy will be installed. A 4m ladder is required. Use template provided to mark drill holes. Plug the drill to power. Use the drill to make holes in the brick wall. With two people, one on the roof to hold the canopy, the other on the ladder to place it correctly, screw the canopy into the pre-drilled holes using Dyna bolts. Repeat the process for the second canopy. Canopy specs and sizing is at...

    $103 (Avg Bid)
    $103 Média
    1 ofertas

    Hello, I have a project to do it on hypermesh software..

    $7 (Avg Bid)
    $7 Média
    1 ofertas

    1st picture attached is the TYPE of work I am looking for, the balance of pictures are the actual vehicle. It is a 1994 Toyota Dyna Tri-Cab - I need a drawing as-is from the side. The internet has additional pictures of this truck two work with. There will be a second project where we Modify the original drawing.

    $157 (Avg Bid)
    $157 Média
    7 ofertas

    hello To all job seekers I have one project for a non-linear drop test of 12 cylinder assembly design in Solidworks. assembly is very big and bundle size is HxWxL 2700x2000x2000mm approx. you need to provide us test report with all boundry conditions which will be use for analysis. will provide us analysis video detail of deformation of the bundle and internal parts suggest...is HxWxL 2700x2000x2000mm approx. you need to provide us test report with all boundry conditions which will be use for analysis. will provide us analysis video detail of deformation of the bundle and internal parts suggestion for how can we used shock observing material for the bundle with analysis results so that bundle can survive in the 9m drop test. software preference for ansys ls dyna or ...

    $220 (Avg Bid)
    $220 Média
    20 ofertas

    Please read carefully before you bid or I will ignore your bid. I read all bid proposal and compare selected bids based on many criteria among them bid price, previous history, ... so please read these details. I am looking for a software that records mouse clicks and keyboard strokes. The software will allow for them to be displayed on screen with an overlay if desire...open source codes). The software should work in all windows applications and will be tested to work in: Microsoft Office (Word, PowerPoint, Frontpage Excel), Grapher, Math-CAD, Matlab, Cadam, Fortran Power station (Visual Fortran), Adobe software (Illustrator, After Effects, Premiere,...) PTC creo, Inventor, Revit, Solidworks, Autocad, Catia ANSYS, Algor, FemPro, Nastran, Cosmos, Femap, Nastran, ls-dyna Again this ...

    $200 (Avg Bid)
    $200 Média
    6 ofertas

    Need a skilled worker in ansys to do analysis on composite materials. Skill required : Ansys - Autodyn or LS DYNA

    $31 (Avg Bid)
    $31 Média
    7 ofertas

    Require a professional who has any of the software (LY-DYNA, LMS, COMSOL). We have some analysis to be done.

    $123 (Avg Bid)
    $123 Média
    2 ofertas
    $17 Média
    3 ofertas

    Need to get a professional level analysis done on Ansys Autodyn solver or LS Dyna. If you have previous experience in using these, welcome to get in touch. Time is a constraint.

    $39 (Avg Bid)
    $39 Média
    5 ofertas

    The problem requires finding the emerging fragment velocity after an explosion inside a container (design available). Simulation of the process and results required.

    $120 (Avg Bid)
    $120 Média
    4 ofertas

    need to mesh 2 figures one containing only chassis and 1 containing chassis and 1 containing chassis and few additional parts

    $20 (Avg Bid)
    $20 Média
    1 ofertas

    Require help for explosion analysis (LS Dyna) and FEA for an project

    $68 (Avg Bid)
    $68 Média
    1 ofertas

    They are 2 plates which is overlapped to each other. I have to spot weld and apply shear stress and simulate in only hyper mesh optistruct solver. please help me , i am getting error. plate dimensions 1) 110 * 35 * 0.6 ( all are in mm) 2) overlap 35mm

    $15 (Avg Bid)
    $15 Média
    2 ofertas

    Ansys, Abaqus, Hypermesh, metapost,Paraview,nxcae,

    $1 - $5 / hr
    $1 - $5 / hr
    0 ofertas

    I'm mechanical Designer I work on following software's 1 Autocad 2 Solidworks 3 NX CAD & CAM 4 HYPERMESH 5 CREO 6 ANSYS

    $4 / hr (Avg Bid)
    $4 / hr Média
    1 ofertas

    Hello Satish More Here I am Expert in Autocad, Solidworks,NX CAD & CAM,CREO,HYPERMESH, ANSYS And CREO

    $2 / hr (Avg Bid)
    $2 / hr Média
    1 ofertas

    I have a solved problem of a project with me. All I need is step by step procedure of doing that in a detailed report (PDF). In the model geometry is created in hypermesh itself but I want to import the geometry and continue the process.

    $16 (Avg Bid)
    $16 Média
    3 ofertas

    I have a 3D geometry with bends which needs to be meshed using the hyperMesh software. Also will welcome the chance to learn how it was meshed.

    $90 (Avg Bid)
    $90 Média
    13 ofertas