Imx6 orcad trabalhos

Filtro

Minhas pesquisas recentes
Filtrar por:
Orçamento
para
para
para
Tipo
Habilidades
Idiomas
    Estado do Trabalho
    700 imx6 orcad trabalhos encontrados, preços em USD

    Hardware Requirement specifications 1 Media control board design using Broadcom BCM2xxx family chipset 2 "SSD Interface (Storage device) - 2nos required. Two slots are required to connect the SSD externally. NVME or compatible interface. " 3 Minimum 4TB or higher capacity SSD should support in both the SSD interface slots. SSD should be removable 4 Both the st...USB 3.0 - 2nos of interface is required 6 Dual SIM, 5G LTE connectivity is required 7 Device should operate using standard 12VDC external adapters 8 Temperature Rnge: -30 to 85 Deg.C 9 Compliance: FCC Part 15 class A, EN 61000-6-4 (generic), EN 61000-6-2(generic) Reference schematics 1 Reference schematics will be given at the start of the project Deliverables 1 Editable schematics - Altium / OrCAD capture file...

    $292 (Avg Bid)
    $292 Média
    8 ofertas
    Schematics Design 4 dias left
    VERIFICADO

    Hardware Requirement specifications 1 Router Board design using Filogic 880 Chipset. 2 basic / default circuit - Reset , programming interface, Crystal etc 3 Two no's of 10G LAN ports 4 Fou...Device should operate using standard 12VDC external adapters 12 Temperature Range: -30 to 85 Deg.C 13 Compliance: FCC Part 15 class A, EN 61000-6-4 (generic), EN 61000-6-2(generic) 14 Internal RTC support is required 15 On-Board Nand flash of 4GB capacity for OS and system settings storage 16 Fast wireless charging support is required 17 UART Interface Deliverables 1 Editable schematics - Altium / OrCAD capture file Timelines : 1 Week Reference schematics 1 Reference schematics will be given for Sr No. 1 to 13 mentioned above. 2 Additionally needed to draw the circuit for Sr. 14 to 16 ...

    $331 (Avg Bid)
    $331 Média
    10 ofertas

    ...seamlessly blend them for optimal performance. **Requirements:** - Experience in designing large (>20x20 cm) PCBs. - Proficiency in multi-layer PCBs, capable of handling complex circuit integrations. - Strong knowledge in both analog and digital signal processing. - Ability to optimize design for signal integrity and power efficiency. **Ideal Skills:** - Expertise in PCB design software (e.g., OrCAD Altium Designer, KiCad, Eagle). - Familiarity with PCB manufacturing processes and guidelines to ensure design is manufacturable. - Experience in designing PCBs for high-speed digital and sensitive analog signals. - Good communication skills to collaborate on design iterations. This project not only demands technical expertise but also creativity and attention to detail. If you...

    $24 / hr (Avg Bid)
    $24 / hr Média
    24 ofertas

    I'm looking for an experienced freelancer to convert a mixed-format PDF into a detailed OrCAD schematic for prototype development. The result should be a workable OrCAD file that I can use as a foundation for manufacturing a prototype. Here's what I need: - Conversion of a mixed-format PDF (both images and text) into OrCAD - A focus on critical details to create a functional schematic - Accuracy is crucial, but an exact replica isn't necessary; I just need a usable OrCAD file Ideal Candidate Should Have: - Experience with PCB design and schematic capture in OrCAD - Ability to interpret electronic schematics and component datasheets - Keen attention to detail and a focus on accuracy - Good communication skills and adherence to deadlines Y...

    $200 (Avg Bid)
    $200 Média
    25 ofertas

    ...skilled in PCB design who can meticulously convert a basic electronics schema from a PDF into OrCAD format. The source document is straightforward with only a few components to replicate. What I'm looking for: - **Conversion Expertise**: Efficiently replicate the PDF schema. - **Attention to Detail**: Maintain accuracy of components and connections. - **OrCAD Proficiency**: Familiarity with the specified older version (*please message to confirm version*). - **Communication**: Open dialogue for any clarifications. Ideal Candidate: - Proven experience with OrCAD and PCB design. - Ability to deliver a clean, editable OrCAD file. - Prompt response to any adjustments needed. Project Deliverables: - An OrCAD file matching the PDF schema. - Confirmat...

    $28 (Avg Bid)
    $28 Média
    11 ofertas

    As the project owner, I require an experienced PCB designer from Pakistan to recreate old Orcad files in Altium. My preferences and needs are: - I will provide the original Orcad files for a PCB design of intermediate complexity. - I need someone with experience in handling complex circuit designs, which contain numerous components. - This project won't just be a simple conversion job. I need you to add certain components to the new Altium design based on my specifications. - Communication is crucial for this project. Hence, you should have a strong grasp of English. [Removed by Admin] Key skills: Altium Designer, PCB Layout, Circuit Design, Orcad.

    $149 (Avg Bid)
    $149 Média
    26 ofertas

    As the project owner, I require an experienced PCB designer from Pakistan to recreate old Orcad files in Altium. My preferences and needs are: - I will provide the original Orcad files for a PCB design of intermediate complexity. - I need someone with experience in handling complex circuit designs, which contain numerous components. - This project won't just be a simple conversion job. I need you to add certain components to the new Altium design based on my specifications. - Communication is crucial for this project. Hence, you should have a strong grasp of English. Kindly contact me on Whatsapp a(removed by Freelancer.com admin). Key skills: Altium Designer, PCB Layout, Circuit Design, Orcad.

    $140 (Avg Bid)
    $140 Média
    15 ofertas

    I'm looking for a proficient PCB designer, preferably from Pakistan, who excels in working with Altium. Your primary task will involve recreating old Orcad files in Altium. As these are redrawn, certain components should be added to the design based on my particular specifications. These additions include: - Resistors - Capacitors - Integrated Circuits (ICs) Prior experience is an essential criterion for this job. Please ensure to detail your relevant practice within PCB design and highlight any specific work within the consumer electronics industry, as this is my preferred sector. Moreover, if you have any experience of redesigning circuit boards with updated components, do include that in your application. Y(removed by Freelancer.com admin) for any clarifications or furthe...

    $131 (Avg Bid)
    $131 Média
    4 ofertas

    As the project owner, I require an experienced PCB designer from Pakistan to recreate old Orcad files in Altium. My preferences and needs are: - I will provide the original Orcad files for a PCB design of intermediate complexity. - I need someone with experience in handling complex circuit designs, which contain numerous components. - This project won't just be a simple conversion job. I need you to add certain components to the new Altium design based on my specifications. - Communication is crucial for this project. Hence, you should have a strong grasp of English. Kindly contact me on Whatsapp at +961 81 900568. Key skills: Altium Designer, PCB Layout, Circuit Design, Orcad.

    $216 (Avg Bid)
    $216 Média
    15 ofertas

    As I am transitioning to KiCad software, I am in need of an Electrical Engineer or a PCB designer who can convert my OrCAD schematic files into KiCad schematic files. Here are the specifics of the task at hand: - Complexity Level: You will be dealing with medium complexity circuits. So, a sound understanding and experience in dealing with such circuits is required. - Components: You don't have to worry about dealing with proprietary or obsolete components since all components in the circuits are standard. Ideal candidates for this task would be someone with significant experience in Electrical Engineering or PCB design, specifically familiar with both OrCAD and KiCad schematic files. Proficiency in file conversion and a meticulous approach to maintain circuit integrit...

    $83 (Avg Bid)
    $83 Média
    16 ofertas

    ...memory, processor (CPU), etc. At this stage, the freelancer must send me the final project file to make it complete, the file must be in the pcb extension PCB file is a crucial document for the manufacturing and design of a circuit board. A. PCB file helps to create the layout for printing a circuit board. The most popular software for assembling a PCB file are: 1. Altium Designer 2. OrCAD 3. KiCad 4. EasyEDA 5. Eagle These software offer a variety of features for creating, simulating, analyzing and manufacturing printed circuits. They are used by electronics professionals around the world. But there is no limitation on the specific software, as long as the file follows the established format standard of the .PCB extension 2. Get recommendations from i...

    $117891 (Avg Bid)
    $117891 Média
    9 ofertas

    GUI development I am looking for a skilled software developer to work in a small team to develop a GUI for energy storage monitoring. Skills and Experience: - GUI development - touchscreen Freescale iMX6 processor - CAN Bus communications - AI implementation Project Scope: - This project is part of a larger project, so it is important for the freelancer to understand the overall scope and objectives. - The timeframe for this project module is medium, ranging in excess of 4 weeks. Application Requirements: - Successful freelancers should include their relevant experience in GUI development, CAN Bus, microcontrollers. - Past work examples related to energy storage or similar projects would be highly beneficial. - It is also important for freelancers to provide detailed project ...

    $19 / hr (Avg Bid)
    $19 / hr Média
    21 ofertas

    ...Your expertise, either directly or indirectly, should cover: Embedded Programming and Hardware Designing PCB Designing Schematic/Circuit Designing PCB Assembling 3D Design and Printing Automation AI-assisted development App Development, both Android and iOS Web Application Development Your verifiable expertise should extend to tools like Altium, Eagle, KiCad, Orcad, Proteus EasyEDA, Solidworks, Fusion 360, Arduino IDE, STM32 IDE, MPLAB, MATLAB, Microchip Studio, Eclipse, Intellij, Netbeans, Atom, FlatCAM, Android Studio, XCode, VSCode, WinAVR. Avoid using copy/paste bids; only bid if you're proficient and capable of handling the jobs we offer. In your first reply, provide a comprehensive portfolio with references outside Freelancer fo...

    $366 (Avg Bid)
    $366 Média
    54 ofertas

    My project is a simulation of a Wind-Diesel-Battery system using Orcad Pspice and Matlab/Simulink. The main purpose of the simulation is to to design and implement a Wind - Diesel Generator - Batteries hybrid power system that supplies communications infrastructure company remote off-grid base stations with different power sources while preventing power outages. Many of the company's base stations are located in remote areas where the energy supply is unstable or nonexistent. The power system should continuously supply the load of the communication tower. I have specific parameters set for the simulation, and I would like a the schematic and circuits files with the simulation results. With the help of a Freelancer expert, I am confident that a simulation of the system can be ...

    $145 (Avg Bid)
    $145 Média
    13 ofertas
    pcb designer Encerrado left

    I am looking for a freelancer to design a double-layer PCB using Orcad. I am not sure which features or requirements need to be included, so I will leave it up to the freelancer’s expertise to decide. I am expecting a quality product built to exact specifications. This project is time-sensitive and I need the project completed quickly and efficiently. If you possess the skills and experience necessary to complete this project, please submit a bid of your services. I look forward to working with you.

    $983 (Avg Bid)
    $983 Média
    16 ofertas

    Thermoforming Machine CAD+PCB - I am looking for a freelancer who can assist me in designing a thermoforming machine with specific features including: - Vacuum forming capability - The PCB design needs to be compatible with OrCAD software. - The expected size and complexity of the PCB is single sided. Ideal Skills and Experience: - Proficiency in CAD software for designing thermoforming machines. - Experience in PCB design using OrCAD software. - Knowledge of vacuum forming technology. - Familiarity with single sided PCB design.

    $220 (Avg Bid)
    $220 Média
    11 ofertas

    We are sea...the PPS. Lattice ECP5 on a custom board There are 2 external interfaces to an IMx6 SPIM: Spi Slave, the Master is a Imx6 processor, which is used to write and read internal registers and ADC’s registers. Details on the protocol in the FDD SPIS: Si Master, the data acquired from the ADCs are packed and sent to the external IMx6 Modifications ADD MEMS Accelerometer, ADXL355 channel modify the data stream, adding 8th channel. A review of protocol might be needed ADD Registers to control DAC and discretes ADD DAC. We can share a DDS to generate arbitrary waveforms, sine and pulses Connect some LED to internal registers controlled by SW Other activities Test and debug on a custom board with a iMX6 connected. the iMX6 will not be part of th...

    $452 (Avg Bid)
    $452 Média
    19 ofertas

    I am looking for an Orcad expert who can design a PCB and perform simulation using PSpice. The project involves intermediate level complexity. Specific requirements for the PCB design include sensor integration. The ideal candidate should have expertise in Orcad and PSpice, as well as experience in designing PCBs with sensor integration.

    $96 (Avg Bid)
    $96 Média
    6 ofertas

    ...project requirements and specifications. Prototyping and Testing: Build and test prototypes to validate circuit designs and PCB layouts, identifying and addressing any issues. Requirements: Strong background in Electronics Engineering with a focus on circuit design and PCB development. Proficiency in tools commonly used for circuit design and PCB layout, such as Altium Designer, KiCad, Eagle, OrCAD, and Fritzing. In-depth knowledge of electronic components, their specifications, and characteristics. Experience in translating circuit concepts into detailed and accurate schematics. Expertise in PCB layout design, considering signal integrity and manufacturing constraints. Strong problem-solving skills and attention to detail. Ability to prototype and test circuits for validation...

    $76 (Avg Bid)
    $76 Média
    18 ofertas

    I need someone with significant experience in Orcad PCB design tools. Your task will be to provide online guidance as we navigate through my PCB design, ensuring efficient component placement and routing. Contact me if you are very good in using the orcad tools that make the design goes fast and easy

    $13 / hr (Avg Bid)
    $13 / hr Média
    10 ofertas

    Linux embedded SW developer, iMX6/Zynq we are looking for a skilled Linux embedded software developer to work on a project involving the iMX6 hardware platform (Variscite). The main functionality of the software will be to control 2 SPI peripherals (one Master and one Slave). the iMx6 is connected to an FPGA with the two SPI. both driver for Linux shall be developed and tested we have the dts and rootfs, and we already started testing of he Master SPI (we will share code). SPI Slave has to be developed from scratch OS built with Yocto

    $577 (Avg Bid)
    $577 Média
    21 ofertas

    Create a pspice and or matlab model of PSFB TI UCC*895 controller. Show that it is working model by creating PSFB converter schematic and in Pspice Orcad capture or Matlab Simulink and successfully simulate it. The model has to consist of standard pspice or simulink parts and completely transparent. Parameters of the model are to be easy to change. .

    $434 (Avg Bid)
    $434 Média
    23 ofertas

    I am looking for a freelancer who can modify the layout and ...new design fits within the new size limitation. - Use the existing schematic and BOM - Provide the modified design files in a format that can be used for manufacturing - Add Lipo battery charging circuit Skills and experience required: - Electrical engineering especially BLE and power circuits - Proficiency in PCB design and layout - Familiarity with EDA tools such as Altium, Eagle, KiCAD, or OrCAD - Experience in designing small form-factor PCBAs - Knowledge of manufacturing processes and design for manufacturability (DFM) - C++ coding for Nordic MCUs a plus If you have the skills and experience required for this project, please submit your proposal along with your portfolio showcasing similar projects that you have ...

    $162 (Avg Bid)
    $162 Média
    37 ofertas

    Hi I have an old Orcad PCB II dos file version, need to have it converted to Cadence Allegro or Autocad or other free viewer. so it can just be a straight conversion. I'm looking for support from a freelancer with experience in ORCAD, ALLEGRO Designer PCB. If you feel like this is a project you can help me with, I look forward to hearing from you soon. Thanks!

    $64 (Avg Bid)
    $64 Média
    8 ofertas

    Hi I have an old Orcad PCB II dos file version, need to have it converted to Cadence Allegro or Autocad or other free viewer. I don't need any specific design elements or features preserved in the converted file, so it can just be a straight conversion. I'm looking for support from a freelancer with experience in ORCAD, ALLEGRO Designer PCB. If you feel like this is a project you can help me with, I look forward to hearing from you soon. Thanks!

    $150 (Avg Bid)
    $150 Média
    27 ofertas

    I am looking for someone with experience developing Embedded Linux Kernel & Rootfs compiling for an IMX6 SBC. The SBC manufacturer has already provided the kernel sources as well as rootfs sources along with instructions. The uboot sources are not provided. I need someone who can do some minor customisations with the kernel and file system to improve boot time, to add facility to automatically update the firmware using ethernet, to change the debug serial port to some other port. To configure other pins for GPI/Os etc. Candidate with suitable experience only apply. Need to get this done in 1 to 2 weeks time. The Details of the Single Board Computer are as follows: CPU: Architecture: Cortex-A7 Frequency: 528MHz RAM: 256MB DDR3 ROM: 256MB NandFlash System: Linux4.1.15+QT...

    $361 (Avg Bid)
    $361 Média
    5 ofertas

    I am looking for someone with experience developing Embedded Linux Kernel & Rootfs compiling for an IMX6 SBC. Specifically, I need a custom build of the Linux Kernel and Rootfs for the target platform that will use an Ubuntu-based operating system. I have a specific version of the kernel and rootfs in mind, which I will provide. In addition, I need someone to create custom drivers or modules for the Kernel, as well as optimize its performance or size. The successful candidate should be highly experienced in Linux Kernel and rootfs compiling and development and have previous experience working with the target platform. The Details of the Single Board Computer are as follows: CPU: Architecture: Cortex-A7 Frequency: 528MHz RAM: 256MB DDR3 ROM: 256MB NandFlash System:

    $413 (Avg Bid)
    $413 Média
    4 ofertas
    PCB designer Encerrado left

    ...DFM, DFA, DFT constraints • Do thorough design review. • Work with fab suppliers to get boards fabricated • Willing to do assigned tasks as required by the company Qualifications: • Diploma or Bachelor Degree in electrical / Electronics engineering or related field • Proven experience in schematic design, preferably in OrCAD Capture • Experienced in PCB design for high-current/voltage and high-speed applications • Experience managing PCB layout, preferably in Allegro/OrCAD PCB Designer • Knowledge in IPC Class 3 PCB Design requirements is helpful. • Knowledge of standards, such as MIL, JEDEC, IPC & IEC is helpful • Understanding of PCB manufacturing processes for HDI & Standard Thru-Hole • Fluency in English (...

    $7 / hr (Avg Bid)
    $7 / hr Média
    10 ofertas

    ...providing documentation throughout the development process. To be considered for this project, please submit a proposal detailing your experience with FPGA development, embedded Linux systems, and Linux driver development. Please also include links to any relevant completed projects that you have worked on in the past. A custom FPGA boards interfaces with 7 ADC and an iMx6 external SODIMM module. there is a Master and Slave SPI on the iMx6. Master is used to program internal registers of the FPGA (we tested it with a simple code and its working). The Slave is used to capture data sent by the FPGA (ADC data). The Linux SPI driver to control the external FPGA shall be written and tested. The FPGA has been tested in simulation, the integration on hardware and small bug fixi...

    $599 (Avg Bid)
    $599 Média
    9 ofertas
    layout designer Encerrado left

    layout designer how know to rout,place and create symbols according to datasheet layout designer in ORCAD/ALLEGEO

    $11 / hr (Avg Bid)
    $11 / hr Média
    20 ofertas
    Layout for PCB -- 2 Encerrado left

    I am looking for a skilled individual / company who can help me design a multilayer PCB layout for my project. The design is to be made in Orcad and we have the schematic ready for the product. Further details will be provided later. Ideal Skills and Experience: - Experience with PCB layout design - Knowledge of multilayer PCBs - Experience with microcontroller components - Ability to work with standard PCB sizes - Understanding EMI / EMC principles

    $479 (Avg Bid)
    $479 Média
    31 ofertas
    Custom ESP32 board Encerrado left

    ...design of a flexible flat cable with a small sensor on one end and the connector on the other end. The final deliverable should include all the necessary design files and documentation to send to a PCB manufacturer for fabrication and assembly. Image attached is the form factor for this project. Skills: Proficiency in PCB design and layout using software such as Altium Designer, Eagle, KiCad, or OrCAD Experience with ESP32 micro-controller and WiFi circuit design, including the use of an external antenna Knowledge of battery management and charging circuits, including wireless charging Familiarity with USB connectivity for programming purposes Experience designing flexible flat cables and integrating sensors Knowledge of electronic components selection and sourcing Proficiency i...

    $346 (Avg Bid)
    $346 Média
    19 ofertas

    I have a component database as a part of OrCAD CIS/CIP installation. OrCAD is a schematics/PCB design tool. The database server is MS SQL Express and it is installed on the same PC, i.e. it is basically a single user setup. In OrCAD schematics there is an operation called linking a database part. That is when you select a part in the schematics or in Part Manager and assign it to a component in the CIS database. CIS stands for Component Information System. The problem I am experiencing is that linking of a single part takes about 10 seconds and if I try to link multiple identical parts to the same database part at once, the time grows exponentially after the number of parts exceed a couple of dozens. I can see from the PC resource monitor that the memory usage grows ex...

    $145 (Avg Bid)
    $145 Média
    8 ofertas
    design PCB Orcad Encerrado left

    design the printed circuit board for wireless speaker module

    $7 - $7
    $7 - $7
    0 ofertas
    Orcad PCB design Encerrado left

    Hello there, I am looking for a average Freelancer to help me out with a school project involving OrCad PCB design. It will be a simple two layout. This board is needed not to be perfect as per schematic but just for a school project. If you possess the necessary skills and experience for this type of work, I look forward to your bids and to working with you. Thank you for your time and consideration!

    $13 (Avg Bid)
    $13 Média
    10 ofertas

    We have started with a working Yocto Dunfell release from NXP that provides a limited OS. We have a layer from other manufacturers that permits building a Ubuntu-like release in Yocto, but are having trouble getting this layer to work with the NXP Dunfell.

    $31 / hr (Avg Bid)
    $31 / hr Média
    7 ofertas
    PCB Gerber Design Encerrado left

    As the name suggest, you have to design a gerber for which schematic will be provided in OrCad.

    $289 (Avg Bid)
    $289 Média
    38 ofertas

    Hello I mainly need a knowledgeable person in PCB design to help with import an old project from CADint and edit it on Orcad. Most of the work will be mainly on Orcad PCB design. Please do not bid if you are not good enough on Orcad

    $7 / hr (Avg Bid)
    $7 / hr Média
    16 ofertas

    More details will be shared via chat with potential freelancer

    $16 (Avg Bid)
    $16 Média
    4 ofertas

    More details will be shared via chat with potential freelancer

    $14 (Avg Bid)
    $14 Média
    2 ofertas

    Combine OrCAD 2 projects - take two OrCad projects and mke them as one

    $106 (Avg Bid)
    $106 Média
    7 ofertas

    detailed explanation of how to do these on Bread Board and the answer to the questions to the file below and Psipce ORcad simulations

    $46 (Avg Bid)
    $46 Média
    11 ofertas
    I want Orcad Schema. Encerrado left

    More details will be shared via chat with potential freelancer

    $13 (Avg Bid)
    $13 Média
    4 ofertas
    I want Orcad Schema Encerrado left

    More details will be shared via chat with potential freelancer

    $12 (Avg Bid)
    $12 Média
    6 ofertas

    More details will be shared via chat with potential freelancer

    $22 (Avg Bid)
    $22 Média
    3 ofertas

    More details will be shared via chat with potential freelancer

    $14 (Avg Bid)
    $14 Média
    3 ofertas

    More details will be shared via chat with potential freelancer

    $22 (Avg Bid)
    $22 Média
    3 ofertas
    I need Orcad Schemaa Encerrado left

    More details will be shared via chat with potential freelancer

    $14 (Avg Bid)
    $14 Média
    4 ofertas

    So I have a .PCB file for a PCB designed with Allegro PCB Designer/Orcad. I need someone to export the gerbers from this file for me so I can have them prototyped and manufactured. Anyone that accepts this must have the software required to do this and be familiar with the process. Thanks!

    $32 (Avg Bid)
    $32 Média
    5 ofertas

    Help with Eclipse project configure/build/compile of OpenGL ES Environment: - Toradex Colibri iMX6 (ARM Cortex) SoM board setup with LCD display - TDX Wayland with XWayland 5.7.0+build.20 (dunfell) Linux distribution - Eclipse IDE (available on Win10 PC and on Ubuntu 16.04) - GCC Linaro cross compilation toolchain (available on Win10 PC and on Ubuntu 16.04) - Root_fs for target SoM Development environment installed and configured. Basic ‘hello world’ written in C successfully compiles under Eclipse on Win10 and on Ubuntu 16.04. Compiled code successfully runs on target SoM iMX6 board. Task description: It is required to compile under Eclipse environment the sample C code that can runs basic (hello world type) OpenGL ES1.1 and ES2.0 examples on target SoM. Th...

    $176 (Avg Bid)
    $176 Média
    10 ofertas