Plumbing trabalhos


Minhas pesquisas recentes
Filtrar por:
    Estado do Trabalho
    7,549 plumbing trabalhos encontrados, preços em USD
    Autocad PAINTER for a camp 6 dias left

    We need an autocad draftsman To calculate the loads for air conditioning (18,000 units), each room has two air conditioners = (32,000 units) and lighting. The cable must be extended and we want to make a control panel, to know the type of electricity generator that we will need for the camp. And the work of plumbing extensions for each room (plumbing) There is already lighting and fuses. We need cables and load measurements to install generators We hope that the scheme will be simplified. More details will be provided as requested

    $8 / hr (Avg Bid)
    $8 / hr Média
    12 ofertas

    ...concrete roof with some internal concrete walls • Modern Design – Walk out Basement, 1st floor, 2nd floor o 6 bedroom o Large master bedroom  Two huge walk in closets o Large master bathroom  Toilet - Toto neorest  Large walk in shower – with two person setup and two rainforest heads.  Steam Shower  Sauna  Dual sinks for his and her sides  Huge 2 person bathtub  Heater floor and plenty of plumbing to run all items o Huge kitchen with windows looking to woods/ creek  Huge wet island  Bar  huge built in refrigerator • •

    $21 / hr (Avg Bid)
    $21 / hr Média
    31 ofertas

    I am starting a whole home water filtration installation business to improve drinking water quality and lifespan of plumbing fixtures and appliances. I would strongly prefer targeted marketing in Cobb/Cherokee/Bartow/Fulton counties of north Georgia. I've included a photo of a flier that gives basic

    $17 / hr (Avg Bid)
    $17 / hr Média
    36 ofertas

    High-quality building permit set of documents with consistent, clean drawing file and drawing sheet formatting (font, line weights, layout, drawing layers, etc) - Floor plans (showing both existing, as-built conditions and proposed remodel including Imperial dimensions, furn...formatting (font, line weights, layout, drawing layers, etc) - Floor plans (showing both existing, as-built conditions and proposed remodel including Imperial dimensions, furniture layouts, electrical, ceiling detail, FF&E labels ) - Photo-realistic 3D modeling showing detailed finishes, furniture, plumbing fixtures, lighting fixtures, (interior but sometimes exterior) - Interior elevations and details (including tile layout, trim, casework, base/casing, wall treatments, ceiling treatments, lighting, ...

    $637 (Avg Bid)
    $637 Média
    35 ofertas

    Turn Around plumbing is a business in maintenance and repairs of all plumbing and gas problems. I want a tap at the centre that maybe leaking or dripping water with an arrow around it ? ( in reference to Turn Around ) Then have Turn Around in writing above it following the curve, and Plumbing on the bottom . im not sure how this works but i would like it to potentially be vibrant in colour, lighter blues and darker lines . whatever you think works :)

    $26 (Avg Bid)
    $26 Média
    68 ofertas

    I have a concept drawing done in revit 2018.2 model for 4 storey building. I am trying to get pricing for Electrical and HVAC in order to get an idea for financing purposes. Unfortunately the subcontractors do not entertain quoting the project without a full set of engineering drawings. Given the fact that it is only a concept model (which will most definitely change when architects and engineer get involved), I cannot spend too much. Please specify number and type of drawings.

    $290 (Avg Bid)
    $290 Média
    40 ofertas
    Canfix Qatar 1 dia left

    Canfix is a company that provides logistic services such as ( Carpentery services, plumbing, electrical services, Marble and granites, gardening, and painting). customer satisfaction is the main role of Canfix, therefore all services will be provided to clients by highly qualified experts in each field. the website will be our main platform, where clients can search for their needed services, fill in their info, upload pictures of the object or area that needs to be fixed and ask for a quotation. on the other side, Canfix side request the expert, and the expert analyzes the problem, and gets back to Canfix with a solution and whatever product/part is needed to get the job done. finally, Canfix get back to the client with the quotation including the parts/product charge and labor cha...

    $30 - $250
    $30 - $250
    0 ofertas

    I need a logo for Patriot Plumbing my plumbing company. I would like an Eagle character with muscles and pipe wrenches. Maybe aviator sunglasses. Would like Red, white, and blue themed colors. The name of my company should be included in this logo. Patriot Plumbing.

    $100 (Avg Bid)
    Destacado Garantido
    236 inscrições
    Catalog Design Encerrado left

    We are a plumbing supplies company looking for a professional to design our latest catalog. To be considered for the project, you must have the following skills: Photoshop Graphic Design Adobe InDesign Brochure Design Adobe Illustrator The catalogue will contain 8 pages only. Pictures and text with be provided. Please respond with your portfolio.

    $58 (Avg Bid)
    $58 Média
    149 ofertas

    Build a web scrapper to to find top rated plumbing businesses across the country on sites like Yelp, Sure Critic, Consumer Reports and Trust Pilot. Need to gather business information, reviews and the star rating. This Information then needs to be put into a user friendly searchable format based on state city and zip code. This will be incorporated into an existing website.

    $1089 (Avg Bid)
    $1089 Média
    118 ofertas
    MEP Layout Encerrado left

    Electrical and plumbing , Water management & sanitation , harvesting , layout .

    $250 (Avg Bid)
    $250 Média
    16 ofertas
    Trophy icon Design me a Logo 1 dia left

    I am after a logo for our company. The company name is DBF Civil. The company specialises in civil work, excavation (earthmoving), pipelaying and plumbing. DBF is named after our dogs which are 3 kelpies. We are after a modern and eye catching design. We like the idea of one of the colours being blue as it is professional, draws the eye and is versatile for branding etc.

    $170 (Avg Bid)
    1066 inscrições

    Hi, I am looking for serious content writers for my websites about plumbing and HVAC. Writers with excellent English, technical and SEO skills preferred. Requirements: - Articles have to be unique, with no article spinning, rewriting, copy/paste. - Articles have to provide useful material. Not filler or fluff. - No plagiarism, the articles will be checked. - Correct English; spelling, grammar... - Delivery of 1-2 articles per week. - It could be a long-term project. - Bid for 10 articles. Pay: up to $18 for an article with around 1200-1300 words. I gain complete ownership of the provided work, and you cannot reproduce or re-use them in any other way. All work must be kept 100% confidential. Breach of the agreement forfeits all payments and terminates your job immediately. Wri...

    $108 (Avg Bid)
    $108 Média
    75 ofertas

    ✅A plumbing company specializes in blocked drains and sewers with a fast turnaround time. THIS TEXT MUST BE INCLUDED IN LOGO DESIGN?? Blocked Drains Pro - Blocked Drains | Plumber | Emergency Plumbing ?? ✅You can use emergency-type colours for popping out. ✅3D Logo examples will be deleted. ✅Must provide Ai files as a minimum on winning entry. Best of luck people!

    $68 (Avg Bid)
    426 inscrições

    Project scope includes the demolition of an existing cabin (to floor/foundation) and reconstruction of a timber...frame cottage using the same footings except where the building is being made larger (new footings). The cottage is water access and off-grid. Power is provided by a solar/battery setup. Propane fuels the hot water heater and oven. A new septic tank and bed are being installed. We (Voyageur Backcountry Construction) are looking for assistance with the mechanical design and drafting for plumbing (incoming water & drainage), gas (location of propane regulator and lines), and electrical layout (only from existing AC panel throughout house). There may also be an opportunity to assist us with the non-structural framing & insulation components of the job and ot...

    $23 / hr (Avg Bid)
    $23 / hr Média
    18 ofertas

    We want to make multiple ads of the sizes given below in the file. The project is on large scale. We use coral draw for our ad design.

    $7 / hr (Avg Bid)
    $7 / hr Média
    32 ofertas
    Construction Plans Encerrado left

    Need a set of construction plans for a post beam project to satisfy the following: PROVIDE COMPLETE SET OF CONSTRUCTION PLANS TO INCLUDE BUT NOT LIMITED TO FOUNDATION, WALLS, CEILING, ROOF ASSEMBLY, ELEC/PLUMBING AND HVAC. ALL INTERIOR WALLS HAVE TO BE SHOWN, EACH ROOM LABLED PER USE, ALL FIXTURES LOCATED, CEILING JOIST NOTED AND LABELED IN EACH ROOM. Post frame construction typical slab 3500 psi concrete with wire and fiber front 1500 sq feet will be typical stick frame

    $1491 (Avg Bid)
    $1491 Média
    52 ofertas

    structure drawing for home plan 2d and front elevation buildup Area 36x34 for more information contact me.

    $20 (Avg Bid)
    $20 Média
    18 ofertas
    Small Cabin Encerrado left

    I am wanting blueprints drawn up for a small cabin. I have a floor-plan layout which is essentially what I want done with some small changes to it but will need the elevation, electrical, plumbing etc. This will be a cabin in the mountains so I will want the exterior to reflect that style. it is essentially a 1 bedroom cabin with 2 lofts that can be utilized as sleeping space

    $133 (Avg Bid)
    $133 Média
    86 ofertas

    In process of leasing an older 1,300sq foot office space for a craft cocktail bar. The property has only 1 bathroom, but we are in need of redesigning the space for 2. Need to verify installation placement of a 24" bar in main room. Need to verify that the current has only 1 bathroom, but we are in need of redesigning the space for 2. Need to verify installation placement of a 24" bar in main room. Need to verify that the current AC system is capable of cooling a space at a capacity of 40 people or in need of an upgrade. Will the electrical panel need updating to accomodate the new usage. Fire safety exit signage and entry egress requirements. Plumbing / electrical improvements needed, if any. Looking for an architect to verify the above and redesign the ...

    $28 / hr (Avg Bid)
    $28 / hr Média
    19 ofertas

    Want to incorporate a sinand gle car access pit in new shop construction. Residential application. Located in California. Will incorporate simple electrical, pressurized air, and minor plumbing.

    $316 (Avg Bid)
    $316 Média
    19 ofertas
    Residential home Encerrado left

    Looking to have someone design/draft our new home based on a floor plan we have found that we like (with some minor modifications). This is what I need. Please tell me what you can, or can’t, provide: All drawings typical for permit and building- -floor plans -roof plans (asphalt shingle) -site plans -framing plans (concrete block first floor) -foundation plans (slab) -mechanical plans -plumbing plans -electrical plans -all typical cross sections -window and door R.O.’s -ceiling details Any and all revisions necessary to obtain permitting and any necessary unforeseen building modifications Also would be helpful, but not necessary, if you can get engineer to stamp for all plans?

    $2039 (Avg Bid)
    $2039 Média
    52 ofertas

    Deadline: 1 month Planning a single family residence, attached are the plans. We want an open layout throughout the house except for the bathrooms, closets and laundry rooms. Attached are the plans we're looking to purchase. I'm looking for overall room layout, electrical and plumbing drawings, and Hvac. I would like someone familiar with North Carolina building codes if possible.

    $36 / hr (Avg Bid)
    $36 / hr Média
    58 ofertas

    ...purchased a Metronic template and need help to convert Twig templates into proper Vue.js application (Metronic has all the basic functionality also in Vue). More info on Metronic template here: ABOUT US We are a startup developing a Price Comparison Site for the construction industry, with focus on electricity and plumbing materials. The site/service will have similar functionality as other price comparison sites such as: , , , OTHER The job must be delivered in an iterative process where we can see examples and give feedback. Payment upon complete delivery. After this project has been delivered, we also

    $171 (Avg Bid)
    $171 Média
    110 ofertas
    Main Floor Reno Encerrado left

    1,600 sq. foot main floor reno to include: 1) Entrance from garage, powder room, laundry room, coat/storage closet, enlarging exit door to backyard/pool + replacing 2 windows. 2) Repositioning of kitchen including plumbing, eletrical & new kitchen design including removal of existing pantry . 3) Removal of existing gas fireplace & new design & placement of a new fp 4). Removal of existing windows/Double French dors to back yard. Addition of larger floor to ceiling windows to view & access deck & back yard. 5). Enlargement of doorways to dining room, back hall, etc.

    $299 (Avg Bid)
    $299 Média
    40 ofertas

    Hello , Looking for Divi Devs experienced in building Directory Listing websites in Restaurant and Plumbing niches. Thanks

    $18 / hr (Avg Bid)
    $18 / hr Média
    46 ofertas

    Required to prepare coordination drawing for 3 ready services( ventilation, chilled water pipe and plumbing) for one floor of big villa. Also need to prepare AC ducting drawing for the same villa GF, FF & roof. With total AC machine 23 nos.

    $159 (Avg Bid)
    $159 Média
    21 ofertas

    Small project - have different sketchup files currently just need plumbing done quick

    $93 (Avg Bid)
    $93 Média
    29 ofertas
    CAD Drafters Needed Encerrado left

    Need to add some more drafters/architects to my team. MUST meet the following requirements 1. Be willing to get on zoom/voice calls to discuss and revise projects. 2. Work in US time zone so as to be able to respond to questions during the day in a timely manner. 3. Must be able to do siteplans, and full architectural drawings including the following: - Electrical, plumbing, mechanical, roofing, foundation, elevations, framing/structural.

    $405 (Avg Bid)
    $405 Média
    72 ofertas
    2 projects for stamp Encerrado left

    Hi Kariman K My apologize . I accept your price please do stamp these 2 files (for Alabama and Florida) I will send you later plumbing as well. Sorry I was bargaining because really we are in short of money Thanks and regards

    $40 / hr (Avg Bid)
    $40 / hr Média
    2 ofertas

    I would like to build an app for customers to book timeslots for cleaning their homes. The app will include other services such as plumbing and aircon maintenance. Payment can be made over the app using credit card to reserve the cleaning service.

    $683 (Avg Bid)
    $683 Média
    85 ofertas
    plumbing fittings Encerrado left

    Looking for 3D rendering images & source files. Have more than 1000 products.

    $239 (Avg Bid)
    $239 Média
    25 ofertas

    We would like to build a rectangular wood building. It's a simple structure. We need a blueprint/floorplan to show in-floor heating and plumbing in the kitchen. I have attached a very rough drawing with the measurements.

    $15 / hr (Avg Bid)
    $15 / hr Média
    12 ofertas
    Plumbing work Encerrado left

    Plumbing work to be done at home

    $1 - $5 / hr
    $1 - $5 / hr
    0 ofertas

    We will provide the Revit file and need someone to add the plumbing details in 3D such as drain waste vent and water supply lines. I can provide photos of the actual site rooms and plumbing and need someone to add the data to Revit file

    $36 (Avg Bid)
    $36 Média
    25 ofertas

    I'd like to get a website made for my business. I own a plumbing company we specialize in residential plumbing services that include: GARAGE UNIT HEATER INSTALLATION -NEW RESIDENTIAL CONSTRUCTION -BASEMENT DEVELOPMENTS (3 PIECE BATH, LAUNDRY, & WET BAR SINK) -BATH TUB/TUB SURROUND INSTALLATION -SHOWER VALVE REPLACEMENT -BACK WATER VALVE INSTALLATION -HOT WATER TANK INSTALLATION -I'd like to be a simple website to navigate nothing through nothing to fancy. Between 4 to 6 pages maximum -I can upload more pictures upon request

    $152 (Avg Bid)
    $152 Média
    83 ofertas

    I wanne Build search and comparison site for plumbing products in wordpress. the site should be like this site

    $491 (Avg Bid)
    $491 Média
    97 ofertas

    Designer need for a large plumbing project all help and info provided.

    $167 (Avg Bid)
    $167 Média
    27 ofertas

    2D Plan of 300 sqm bar to be designed including electrical and plumbing drawings

    $411 (Avg Bid)
    $411 Média
    102 ofertas

    Looking for an idividual to develop a website for a plumbing & home service company. Would be looking for something with multiple pages for Projects, Services, About Us, Online Booking, etc.. No reference files available at this time, will provide logo in the coming days to awarded designer. Would also potentially be looking for someone to maage SEO & Digital Marketing. Could turn into a longer term relationship for right candidate.

    $186 - $559
    $186 - $559
    161 ofertas

    I have a contracting business (HVAC, Electrical and Plumbing) We handle all of our disatching, accounting, and reporting through Service Titan. I need to build a Project status report for commission purposes. I need to gather my data from Service Titan and two different building departments and have them integrated to show me certain status of a few key data points.

    $30 / hr (Avg Bid)
    $30 / hr Média
    27 ofertas
    Trophy icon Pump Logo Request 110422 Encerrado left

    We need logo sketch we made drawn into logo Files to be included Ai, EPS,PDF, SVG,JPEG, PNG, and layered file Would like the Black logo and the top of M to be the color of blue water. Also, the bottom of the logo pipes can be like attached for ideas but laid out as sketch The file to mock-up is Pipe plumbing file as references under the name

    $20 (Avg Bid)
    114 inscrições

    Lookign for a freelancer to help with the design of a plumbing/ home services company in Calgary, AB.

    $54 (Avg Bid)
    $54 Média
    100 ofertas
    Revit Plumbing Encerrado left

    We have created a small project in Revit. It is showing disconnects. Need Support

    $30 / hr (Avg Bid)
    $30 / hr Média
    9 ofertas

    I have a one story house under renovation and the local City building department requires the drawings to be detailed enough as per their requirements (City of Boynton Beach Florida ). Drawings and comments from the city are attached, only need "architectural/structure" as electrical, plumbing and mechanical is done by others. Timing is as soon as possible.

    $40 / hr (Avg Bid)
    $40 / hr Média
    24 ofertas

    Por favor, Cadastre-se ou Faça Login para ver os detalhes.

    Secreto ADC

    Artigos da Comunidade dos Principais plumbing