Tsunami simulation project trabalhos

Filtro

Minhas pesquisas recentes
Filtrar por:
Orçamento
para
para
para
Tipo
Habilidades
Idiomas
    Estado do Trabalho
    20,913 tsunami simulation project trabalhos encontrados, preços em USD

    build HMI in VC++ for simulation

    $9 / hr (Avg Bid)
    $9 / hr Média
    5 ofertas

    mechanical arena simulation is required

    $17 (Avg Bid)
    $17 Média
    1 ofertas

    Preciso de um projeto no arena simples de carregamento de caminhão com carregadeira. Onde você colocar a capacidade da carregadeira, a capacidade do caminhão e a distancia em que o caminhão irá percorrer. tem que ser feito no arena simulation

    $145 (Avg Bid)
    $145 Média
    2 ofertas

    The project is about creating and simulating a system using python that can detect and prevent accidents before they occur at traffic intersections. Currently, Vehicle identification, vehicle simulation, and license plate detection are complete. The main parts that remain are creating an intersection and generating traffic lights that operate randomly. I am looking for a developer proficient in py...

    $30 - $250
    $30 - $250
    0 ofertas

    The project is about creating and simulating a system using python that can detect and prevent accidents before they occur at traffic intersections. Currently, Vehicle identification, vehicle simulation, and license plate detection are complete. The main parts that remain are creating an intersection and generating traffic lights that operate randomly. I am looking for a developer proficient in py...

    $151 (Avg Bid)
    $151 Média
    5 ofertas

    Critical analysis of your capabilities and limitations as a new business manager revealed through your interaction with the business simulation.

    $38 (Avg Bid)
    $38 Média
    3 ofertas

    This project includes CFD simulation of mass loos of carbon fibers during carbonization. The UDF should be written to model the changes in filament radius, porosity, gas concentrations, etc.. An expert in writing UDF and modeling chemical reactions using Ansys Fluent is needed.

    $500 (Avg Bid)
    $500 Média
    2 ofertas

    The project is about creating and simulating a system using python that can detect and prevent accidents before they occur at traffic intersections. Currently, Vehicle identification, vehicle simulation, and license plate detection are complete. The main parts that remain are creating an intersection and generating traffic lights that operate randomly. I am looking for a developer proficient in py...

    $10 - $30
    $10 - $30
    0 ofertas
    fusion 360 tutor 6 dias left
    VERIFICADO

    Hi, I just passed a written exam for 3D printer engineers and hope to pass the next exam on Fusion 360 in two months. I hope someone to help me with this. It has two categories, one of which consists of 19 sets of required design to complete one of them. This should be done in 40 minutes and have it 3d printed. A set of required files and the finished object should be submitted at the end. I am n...

    $158 (Avg Bid)
    $158 Média
    2 ofertas

    Looking for someone with experience to design and simulate a custom planar transfomer for AC/DC power supply application that would be able to have two DC outputs 5V and 12V as well as be small in size. Please only apply if you have experience with design and simulation of planar transformers. Further details will be given to the suitable candidate.

    $84 (Avg Bid)
    $84 Média
    4 ofertas

    We are working on an outdoor unit of an air conditioner which is based on direct evaporative cooling. We have the CAD model for the system & we require the transient flow simulation involving refrigerant, air & [fazer login para ver a URL] should be done within a day.

    $171 (Avg Bid)
    $171 Média
    3 ofertas

    Hi need someone expert with Multisim design and Simulation tool with knowledge of A/D converters.

    $31 (Avg Bid)
    $31 Média
    4 ofertas

    I need an expert to help me with performing monte Carlo Simulation for Option pricing

    $202 (Avg Bid)
    $202 Média
    5 ofertas

    TensorFlow Federated enables federated machine learning, but uses gRPC for communication. We need to make this data transit through a WebSocket. The goal of this task is to create a simulated federated learning model, similar to this one: [fazer login para ver a URL] Once the model is up and running with two simulated client server and one simulated master server, create the architecture descri...

    $525 (Avg Bid)
    $525 Média
    6 ofertas

    I need someone who knows layout & worker optimization in anylogic. Conceptual model, data and the distributions are ready and settled, and i have the arena model too.

    $85 (Avg Bid)
    $85 Média
    2 ofertas

    Solidworks (Elect) mandatory. Budget 8-10 USD per hour only. I have the mechanical design of the hand sanitizer concept on hand. I need an expert to make a feed tank system and electrical control to run the complete machine. Please check the photo of the mechanical design for handwashing machines. The secondary tank with the actuator on top of the existing design should be able to attach separ...

    $18 / hr (Avg Bid)
    $18 / hr Média
    4 ofertas
    Simulation 6 dias left

    Simulation of CSP plant on SAM software

    $34 (Avg Bid)
    $34 Média
    7 ofertas
    Online PC Game 6 dias left
    VERIFICADO

    Hi there, We need a game developer for an online simulation game that will be integrated with a crypto wallet. If you are interested and have questions, don't hesitate to contact us. After the game is developed, you can continue working as a developer for updates, bug fixing etc. And you can get a share from earnings. Thank you all!

    $130 (Avg Bid)
    $130 Média
    3 ofertas

    I need a WSN simulation created. The simulation must show nodes communicating and performing certain tasks. The main concept of this simulation is to show that actuators can be programmed to perform certain actions from the information collected by the sensors. When the sensors decide that a patient needs to be moved, actuators will be able to lift the patient from certain angles to relieve built-...

    $267 (Avg Bid)
    $267 Média
    2 ofertas

    I NEED A FAST AND EFFICIENT WORKER TO HELP ME ACCOMPLISH THIS TASK QUICK

    $389 (Avg Bid)
    $389 Média
    28 ofertas

    10+ pages report. Project expectation as follows: Look carefully at the jobs description, all these are hexadecimal machine instruction. Simulated CPU will execute these instructions one by one. For each instruction to be successfully executed, it will need some registers, ALU, OPcode, operand etc. After one instruction is done, the result of the instruction need to be recorded in the registers, v...

    $145 (Avg Bid)
    $145 Média
    7 ofertas

    You will create an intermediate level crowd simulation model using the Netlogo.

    $11 / hr (Avg Bid)
    $11 / hr Média
    3 ofertas
    Goldcoders template 6 dias left
    VERIFICADO

    Happy day for all I want someone who has worked on this script before (GoldCoders) I want to make a professional template , Mining simulation With the latest methods and technology Designed with all pages And Adding some effects with flash makes the investor feel that he is already in a remote Cloud mining site , Also need design of a set of banner at size of 780x90, 468x60, 160*600& 125x12...

    $656 (Avg Bid)
    $656 Média
    8 ofertas

    fire engineering , 8000 words , with simulation and powerpoint, 16/5 draft submission, 7/6 turnitin final, already have topic , you can take reference to other source , and you can rephrase it add some references

    $96 (Avg Bid)
    $96 Média
    17 ofertas

    I have a helicopter rotor cad design (not scaled) which I would like to performs a CFD ANALYSIS IN STSR CCM + So the for the CFD Atmosphere conditions sea level Normal day Rotor is not climbing or descending Rotor is hovering And rotational speed of the rotor 270 rpm or 27,5 rad/sec . I’ve found a video of a simulation . I m looking for something similar like this The simulation doesn...

    $202 (Avg Bid)
    $202 Média
    20 ofertas

    I am looking for a design for the adjustable dumbbell (FLYBIRD Adjustable Dumbbells), please see attached files. Specs: (1) Both the Dumbbell with its tray are required. (2) Exact design for every part and the dial to change the weights as per attached photos and videos (3) 5 sets of change. (4) Material: Steel for the main parts and assume the suitable material for any other part. Requirements:...

    $61 (Avg Bid)
    $61 Média
    22 ofertas
    x plane simulation project 5 dias left
    VERIFICADO

    The Project will look at the feasibility and Manufacture of the UAV capable of Carrying a piggyback model (ie wind tunnel), and associated Full data logging instrumentation. The Stability of the Mother Craft is not to be impaired. A Raspberry PI is to be used as a data logger

    $739 (Avg Bid)
    $739 Média
    8 ofertas

    I need Android & iOS game for virtual business simulation fantasy games. Unity 5. Fair code, from the scratch, no copycats.

    $509 (Avg Bid)
    $509 Média
    8 ofertas

    I will provide the paper. I will just need simulation and design matching the paper.

    $40 (Avg Bid)
    $40 Média
    2 ofertas
    Digital IC design 4 dias left
    VERIFICADO

    1) Draw logic symbol, schematic for simulation. 2) Draw stick diagram and Euler’s paths 3) Electric Schematic & Layout 4) LT SPICE and IRSIM where needed to show performance 5) Verify your design by putting pulses to see the outputs. 6) Complete a Truth table for the MUX. 7) Find a Boolean expression for the MUX. 8) Extract Rp, Rn, and C's from your layout using electric. Use the e...

    $16 (Avg Bid)
    $16 Média
    3 ofertas

    emulate my current verilog code.

    $154 (Avg Bid)
    $154 Média
    14 ofertas
    Trophy icon Rhinoplasty photoshop editing 4 dias left

    Hi, Im looking for photoshop editing. I need you to edit rhinoplasty my nose in the pictures, to do a simulation of how my nose will look If I will do a rhinoplasty surgery. the result need to look realistic and natural. from seeing all your models up until now, I think I start to see what I'm aiming for: keep the nose relatively big, I don't like that it tipped down so much I don'...

    $50 (Avg Bid)
    Destacado Garantido Concurso Top
    $50
    165 inscrições

    I have an Excel VBA-based engineering simulation tool that was previously reading the inputs from an excel sheet and write the outputs to the same spreadsheet. I have converted this code into python which is able to read the inputs, do the simulation, and writes the results on a spreadsheet. Now, I want to host this tool/code online. The bare minimum requirements and the main plan features are ex...

    $1212 (Avg Bid)
    $1212 Média
    26 ofertas

    This arm will need to be 3D printed. In PLA material. Nema motors will be used. So you will have to make the cavity of the motors. (More information by chat). First you must calculate the necessary torque of the nema motors (within the simulation in Solidworks). And you will have to tell me what will be the necessary torque for me to know if I choose Nema 17 or Nema 23. The budget is not 10 USD....

    $37 (Avg Bid)
    $37 Média
    4 ofertas

    looking for qualified & Experienced engineer who can do simulation using Proteus software Thanks

    $5 / hr (Avg Bid)
    $5 / hr Média
    8 ofertas

    I am writing a report for different fire scenarios. But I need the expert to support me in doing Simulation of fire scenarios (AutoCAD, FDS, Pyrosim, Pathfinder, and EVACNET)

    $122 (Avg Bid)
    $122 Média
    10 ofertas

    I need you to develop some software for me. I would like this software to be developed for Windows.

    $20 (Avg Bid)
    $20 Média
    2 ofertas

    Complete in 3 days Matlab Version: I will inform later But make sure no plagiarism or copy-paste code from any source as there will be board of regulatory to check it The objective of this project are: 1. To develop the best WSN topology that can enhance the power consumption. 2. To ensure the efficiency of energy and life longevity in the WSN system. * First we have to pick any three topolo...

    $225 (Avg Bid)
    $225 Média
    9 ofertas

    Hi... need to write 2000 word report covering the following topics: - select a small community for this case study - Select the possible system that could provide the community's needs and demands. - Conduct simulation using Matlab -Explain your thoughts and observation of your finding and future implication of implementing renewable energy systems in, domestic applications Can you able ...

    $54 (Avg Bid)
    $54 Média
    1 ofertas
    MATLAB 64-APSK 3 dias left

    MATLAB 64-APSK 1. basic system simulation [fazer login para ver a URL] error control coding

    $91 (Avg Bid)
    $91 Média
    4 ofertas
    Network simulation Ns3/Ns2 3 dias left
    VERIFICADO

    I need an Ns2 expert to do some network simulation. should be ready to start right away

    $131 (Avg Bid)
    $131 Média
    7 ofertas

    1. Map out a standard assembly line for e-motor manufacture (including BOM) and Identify areas for improvement? 2. Create VR system that allows you to run the an assembly line simulation 3. How can the production line be designed to allow quick change overs of products? 4. With reference to Q£ what aspects within the motor design can be improved to support Design for Assembly (DfA) 5. Based ...

    $201 (Avg Bid)
    $201 Média
    1 ofertas

    We are looking for a 3D vision software engineer specialist to help our team accelerate our tech development efforts. The work and knowledge required will on the following areas: 1) Spherical camera geometry 2) Rotation, Translation matrices 3) Projection matrix 4) Edge & feature matching 5) Disparity calculation 6) 3D point cloud generation 7) Pointcloud accuracy estimation 8) Camera paramet...

    $1614 (Avg Bid)
    $1614 Média
    10 ofertas

    it a motorway lane simulation modeling. i will be uploading the document below and all the questiones need to be answered.

    $335 (Avg Bid)
    $335 Média
    1 ofertas

    Electric motor cooling for permanent magnet motor by using starccm+ CFD simulation

    $101 (Avg Bid)
    $101 Média
    3 ofertas

    I have an assembly I want to do simulation and graph of the result I have

    $45 (Avg Bid)
    $45 Média
    8 ofertas

    I need a project with 4 chapters: [fazer login para ver a URL] the design of the robot. [fazer login para ver a URL] design of each component.(Solidworks, Catia, Delmia, etc.) [fazer login para ver a URL] of the physical model of the robot.(Solidworks, Catia, Delmia, etc.) [fazer login para ver a URL] of the robot in the technological production process and its simulation.(Solidworks, Catia, Delmi...

    $30 (Avg Bid)
    $30 Média
    6 ofertas

    It should be done in an OOP style and fast, we can discuss the way it may be done when we get in contact.

    $382 (Avg Bid)
    $382 Média
    11 ofertas

    We need help in electromagnetic model simulation using matlab. It is to calculate E&H fields in imaging system.

    $111 (Avg Bid)
    $111 Média
    9 ofertas

    Completed by 2 days You have to show the progress everyday whatever you will done each day The objective of this project are: 1. To develop the best WSN topology that can enhance the power consumption. 2. To ensure the efficiency of energy and life longevity in the WSN system. * First we have to pick any three topology and choose the best topology in optimizing energy with some graph and results...

    $181 (Avg Bid)
    $181 Média
    8 ofertas