Ubiquiti trabalhos

Projeto: Especialista UniFi / Ubiquiti para Configuração Completa de Rede Residencial Avançada Localização Florianópolis – SC – Brasil (Preferência por suporte remoto, presencial é opcional) Objetivo Estou buscando um especialista experiente em **Ubiquiti UniFi** para estruturar minha rede residencial em nível profissional, incluindo: * Segmentação por VLAN * Configuração de VPN segura * Otimização de Wi-Fi Mesh * Regras avançadas de firewall * Isolamento de dispositivos IoT * Configuração segura para câmeras e NVR Estrutura Atual * Gateway: **UniFi UCG Ultra** * Access Points UniFi (mesh) * Sistema de câmeras + NVR * Inte...

Preciso de um professional com conhecimento em Ubiquiti, preferencialmente no equipamento Dream Machine PRO para configuração de um segundo link internet para redundância do atual. Serviço a ser realizado em Barueri (CEP 06454-050) em nome da consultoria Infoprimeti.

Preciso integrar a Linha de produtos Unifi Ubiquiti com um Captive Portal que colete informações específicas de uma loja/comércio gerando um mapa de calor das gôndolas visitadas pelo Usuário

Gostaria de alguem que possa desenvolver um sistema de Hotspot, com layout e login por email, cadastro, login facebook e outras redes sociais. Os AP Wi-Fi que vou usar, Ubiquiti Unifi e HP Aruba. o mesmo também Mikrotik

...set) explaining the rule logic so I can maintain it later. 3. Brief remote walk-through to verify that each VLAN can only reach what it should (e.g., cameras stream to NVR, guests reach the internet but not LAN, management has full access, etc.). I am comfortable providing current configs over a secure channel and can test changes quickly. If you’ve built similar multi-VLAN environments on Ubiquiti gear before, this should be straightforward work....

Project Overview: I am currently constructing a 4,500 sq. ft. custom home and need a comprehensive Low Voltage Design & Wiring Schedule. I am looking to design a "Rough-In Plan" that I can hand to my electrician/cabling installer. I have a strong preference for the Ubiquiti (UniFi) ecosystem for networking and security. Scope of Work: Home Network (Ethernet/Wi-Fi): Design a robust Ubiquiti UniFi network topology. Determine optimal Wireless Access Point (AP) placement for coverage across three floors + outdoor areas. Plan CAT6a drop locations for TVs, office workstations, and backhaul. Whole House Audio: Design wiring zones for multi-room audio (in-ceiling/in-wall speakers). Designate "Home Run" locations to a central rack/AV closet. Recommend...

Project Description: We are seeking an experienced Network Engineer with specific expertise in the Ubiquiti UniFi ecosystem to help us migrate our user authentication and access control from a traditional Active Directory (AD) environment to UniFi Identity (Standard or Enterprise). The primary goal is to centralize user management directly within the UniFi firewall/console, allowing us to decommission our Windows-based Active Directory while maintaining secure, role-based access to our network resources. Scope of Work: UniFi Identity Setup: Configure UniFi Identity (UID) on our UniFi Cloud Gateway. User Migration/Creation: Assist in migrating existing users or setting up a new user directory within UniFi Identity. Authentication Replacement: Set up One-Click WiFi (Radius-less or ...

...on a fresh server (your call on Ubuntu or Rocky/CentOS, as long as it is a supported platform). • Enable Network Access Control so devices are automatically placed in the right VLAN or have the correct ACLs applied. If RADIUS CoA is the best fit for my gear, please implement it; otherwise explain the alternative you choose. • Integrate with my switching and wireless stack—BDCom, Zyxel, and Ubiquiti UniFi. These models must talk cleanly to PacketFence via SNMP/SSH and RADIUS, with automatic quarantine and remediation working in a live demo. • Configure RADIUS authentication: – 802.1X for corporate laptops and staff logins against Active Directory/LDAP. – MAC Authentication Bypass for printers, IoT, and any device that can’t spea...

I’m stuck getting my Hikvision DVR reachable over the internet through a Starlink-to-Ubiquiti UDM-US setup that’s running in bypass mode. Starlink is already handing out a public IPv6 prefix and both the UDM-US and the DVR pull valid v6 addresses, yet external access still fails. My own attempt to enable IPv6 firewall rules on the UDM-US hasn’t worked, so I suspect a rule mis-match or possibly something buried in the Hikvision network menu. What I need—fast—is someone who knows the UDM interface and Starlink quirks well enough to: • verify / correct IPv6 prefix delegation and routing on the UDM-US • craft any necessary IPv6 firewall rules or port-forward equivalents to expose the DVR securely • confirm the DVR’s IPv6 setting...

...Deco devices, and Ubiquiti UniFi gear to production standards - we have a fairly big network (thousands of Mikrotik devices) - Serve as overflow and escalation point for helpdesk and supporting our field teams - Troubleshoot and resolve advanced network issues (layer 2 & 3) quickly and effectively - Assist in planning and implementing network changes and upgrades - Maintain accurate documentation for every deployment and change - Follow and improve our established provisioning and escalation processes Required Skills & Experience: - Deep, hands-on experience with MikroTik RouterOS (you will be tested) - Strong knowledge of networking protocols: TCP/IP, VLANs, DHCP, DNS, OSPF/BGP fundamentals - Solid troubleshooting skills across multiple vendors (MikroTik, TP-Link, Ub...

...at the site * Multiple **Ubiquiti and Mimosa devices** (sectors, CPEs, PtP links) These devices are **connected behind the MikroTik** (same LAN or VLANs) --- ### 2. Goal My goal is to use **WireGuard as a secure remote access tunnel** that allows me to: * Access the **MikroTik router** remotely (Winbox, SSH, WebFig) * Access **Ubiquiti & Mimosa devices** behind the MikroTik * Do all management **without exposing public IPs** or opening multiple ports --- ### 3. Desired Architecture * The **WireGuard server** acts as a central hub * MikroTik connects to it as a **WireGuard client** * Remote users (laptop / phone) also connect as WireGuard peers * Routing is configured so that: * Remote users can reach the MikroTik LAN * Remote users can reach Ubiquiti...

...infrastructure upgrade that combines low-voltage data lines with standard electrical cabling in the same facility. On the network side I need fresh runs of CAT6 (or better), clean terminations into patch panels, and basic router/switch configuration so the new drops light up immediately. Think wall-plate to rack, labelled, tested with a Fluke, and then a quick hand-off of the switch config file—Cisco or Ubiquiti CLI is fine as long as it’s documented. Parallel to that, I also need the electrical rough-in and final wiring for the endpoints you’ll be serving: new duplex outlets at each workstation, conduit where code requires it, and a tidy breaker panel entry. No heavy distribution work or UPS installs this round—just reliable branch circuits matched to th...

I need a professional to install WiFi, security cameras, and door entry systems using Ubiquiti equipment at a commercial property. The installation will cover more than 10 cameras, focusing on entrances, exits, and common areas. Key Requirements: - Install Ubiquiti WiFi network - Set up over 10 security cameras - Integrate door entry systems - Coverage for entrances, exits, and common areas Ideal Skills and Experience: - Proven experience with Ubiquiti installations - Strong background in commercial security setups - Knowledge of network integration and configuration - Ability to work on-site and complete within budget

I'm looking for an experienced network engineer to set up a site-to-site IPSec VPN using a Cisco ASA router and a Ubiquiti Dream Machine Pro (UDM Pro). Requirements: - Use of IPSec as the VPN protocol - AES-256 encryption for high security - Pre-shared key (PSK) for authentication Ideal Skills and Experience: - Strong knowledge of Cisco ASA and UDM Pro - Expertise in configuring IPSec VPNs - Familiarity with AES-256 encryption and PSK authentication The VPN tunnel is established but I am having issues with traffic flowing between the 2 networks Please provide a detailed plan and your credentials. Looking forward to your bids!

...networking solutions Scalable solutions for SMB, enterprise, and data centers Our Products Enterprise Network Switches (L2 / L3 / Core / Access) Servers & Storage Solutions Wireless Access Points & Controllers Firewalls & Network Security Devices Data Center Networking Equipment Structured Cabling & Networking Accessories Brands We Deal In Cisco Juniper Networks Aruba (HPE) Fortinet Ubiquiti HP Enterprise (HPE) Dell Technologies Netgear Ruckus All major networking & IT infrastructure brands Our Services Network Design & Architecture IT Infrastructure Planning Installation & Configuration Network Migration & Upgrades Troubleshooting & Support AMC & Post-sales Technical Support Industries We Serve Corporate Offices...

I need a Ubiquiti UISP plugin that extends the native ticketing system to incorporate SMS functionalities using our own hardware SMS gateway. The plugin should allow for: - Automated responses - Ticket status updates - New ticket creation via SMS Ideal skills and experience: - Experience with Ubiquiti UISP and plugin development - Proficiency in SMS integration, especially with custom hardware gateways - Strong development skills in relevant programming languages and frameworks - Experience with ticketing systems and automation Looking for a developer who can ensure seamless SMS integration and enhance the ticketing system effectively.

I need a custom 10-inch rack mount to securely hold 3-4 Ubiquiti Unifi networking devices, specifically switches and routers. The rack mount should be made of heat-resistant plastic. Requirements: - Designed for 3-4 Unifi devices - Heat-resistant plastic material - Suitable for mounting switches and routers Ideal Skills and Experience: - Experience with plastic fabrication - Knowledge of networking hardware mounts - Prototyping and design skills

I'm seeking an experienced installer for a Ubiquiti security camera system at my residential property. Requirements: - Install 4-7 Ubiquiti security cameras - Ensure proper configuration and functionality - Provide a brief tutorial on system use Ideal Skills and Experience: - Ubiquiti installation experience - Security camera setup expertise - Residential installation background - Ability to troubleshoot and configure network settings Please share your relevant experience and approach.

I’m ready to segment my Ubiquiti Dream Machine into four distinct networks so traffic stays tidy and secure. One of these networks is dedicated to my IoT devices; the remaining three will be named once we start. I have the exact IP ranges for each segment, but I haven’t settled on VLAN IDs yet, so I’ll lean on your expertise for sensible numbering. Here’s what I need you to handle: • Create four VLANs inside the UniFi Controller and bind them to matching wired or wireless networks as required. • Apply the IP ranges I provide and confirm DHCP is handing out addresses correctly. • Add straightforward firewall rules that keep every VLAN isolated (especially the IoT one) while still allowing each network to reach the internet. • Export ...

I need a skilled professional to assist with proper set up of a Unifi gateway with Bell fibre internet and configure an OpenVPN server for secure remote access. Requirements: - Set up OpenVPN server - Enable secure remote access for multiple devices - Configure Unifi gateway with Bell fibre internet Ideal Skills and Experience: - Experience with Ubiquiti Products - Experience with OpenVPN - Strong networking knowledge - Familiarity with Bell fibre internet setups - Ability to configure secure access for multiple devices Please provide your relevant experience and approach.

The Site Magic tunnel between my UDM Pro UniFi console at work and my USG-Max UniFi setup at home shows as “up,” yet traffic is stuck at the gateway. • I created a dedicated virtual network (VLAN) at home solely for work devices and assigned it to a specific port. • I can ping the work gateway, but no other host—servers, printers, or even the office LAN broadcast—responds. I want to be able to connect a PC to that port at home and have access to devices at work to be able to install printers, software etc.

...desplegable (dropdown) para seleccionar la marca. Al seleccionar una marca, debe actualizarse automáticamente otro campo donde aparezcan los modelos asociados a esa marca. Debe funcionar en lectores comunes de PDF (Adobe Acrobat, etc.). Debe quedar ordenado, limpio y fácil de usar. Ejemplo simple de funcionamiento: El usuario abre el PDF. En el primer campo, elige una marca (por ejemplo: TP-Link, Ubiquiti, Ruijie). En el segundo campo, automáticamente se actualizan y se muestran solo los modelos disponibles de esa marca. El usuario puede seleccionar un modelo y continuar llenando el formulario si aplica. Entregables: Archivo PDF totalmente funcional. Archivos fuente del proyecto (si usa Adobe Acrobat Pro, InDesign, o la herramienta que el freelance...

I'm seeking a skilled network engineer to assess and upgrade my IT network for an upcoming restaurant in central London. Key focuses: - Wi-Fi coverage and performance: Need reliable, fast Wi-Fi for both staff and customers. - Network hardware and cabling: Evaluate and improve current setup. Current issues: - Slow internet speeds - Poor W...coverage and performance: Need reliable, fast Wi-Fi for both staff and customers. - Network hardware and cabling: Evaluate and improve current setup. Current issues: - Slow internet speeds - Poor Wi-Fi coverage Ideal skills and experience: - Expertise in network design and implementation - Experience with commercial Wi-Fi solutions - Familiarity with various network equipment brands (Cisco, Ubiquiti, Netgear) Please provide a detailed p...

I need an experienced OpenWRT developer to modify the firmware for a Ubiquiti U6+ access point. Key Requirements: - Custom User Interface: Modify the existing GUI to better suit my needs. - Minor modification to the GUI and change select options - Change some item labels - Hide options in the GUI Ideal Skills and Experience: - Proficiency in OpenWRT and firmware development - Experience with Ubiquiti devices - Strong understanding of Linux-based systems - Ability to customize web interfaces and GUIs All detailed requirements are mentioned in the attached file

I need an experienced OpenWRT developer to modify the firmware for a Ubiquiti UAP-AC-M-PRO access point. Key Requirements: - Custom User Interface: Modify the existing GUI to better suit my needs. - Minor modification to the GUI and change select options - Change some item labels - Hide options in the GUI Ideal Skills and Experience: - Proficiency in OpenWRT and firmware development - Experience with Ubiquiti devices - Strong understanding of Linux-based systems - Ability to customize web interfaces and GUIs All detailed requirements are mentioned in the attached file

I need an experienced OpenWRT developer to modify the firmware for a Ubiquiti U6-LR long-range v3 hardware access point. Key Requirements: - Custom User Interface: Modify the existing GUI to better suit my needs. - Minor modification to the GUI and change select options - Change some item labels - Hide options in the GUI Ideal Skills and Experience: - Proficiency in OpenWRT and firmware development - Experience with Ubiquiti devices - Strong understanding of Linux-based systems - Ability to customize web interfaces and GUIs All detailed requirements are mentioned in the attached file

I’m upgrading one room in my home with reliable, hi...on-site session (whichever is practical in your region) to install, configure, and secure the network—SSID naming, WPA3 setup, firmware updates, and optimal channel selection. • Verify signal strength and throughput in the room, provide a quick performance report, and offer simple troubleshooting tips for future tweaks. Experience with mainstream consumer hardware (e.g., TP-Link, ASUS, Netgear, Ubiquiti) is essential; familiarity with heat-mapping tools like Ekahau or similar is a plus. Clear, step-by-step communication matters more to me than jargon. If you’ve completed similar single-room or small-home installations, share a brief example so I can see your approach. I’m ready to move forward a...

I’m ready to build out a new company-wide IT network and want a seasoned network specialist who can take the lead from planning through deployment. Although the exact mix of endpoints is still being finalized, expect a typical office blend of computers, laptops, printers, and perhaps a handful of IoT or smart-office device...with recommended hardware (switches, routers, access points, firewalls) • Configuration scripts or step-by-step settings for each device • Security plan outlining authentication, monitoring, and incident-response measures • Clear documentation so in-house IT can maintain and expand the setup Please outline your proposed approach, the primary tools or platforms you’d use (e.g., Cisco, Ubiquiti, MikroTik, pfSense), and a timelin...

Je dois ...sélection du matériel (caméras IP, NVR, badges, centrales, capteurs) et la préparation des configurations (adressage, QoS, redondance) ; • la production des plans, schémas et nomenclatures exploitables par les installateurs. J’attends des livrables concrets : – dossiers d’ingénierie (plans DWG/PDF, topologies, notes de calcul) ; – paramétrage prêt à être injecté (fichiers de configuration Cisco/Ubiquiti ou équivalent) ; – scénarios de tests couvrant vidéo, contrôle d’accès et intrusion avec rapports de validation. L’ensemble devra respecter les bonnes pratiques courants faibles et garantir la compatibilit&eac...

I'm looking for assistance in configuring a Ubiquiti DR7 router with two VLANs: one for customers and one for staff. Requirements: - Customers should have access to certain printers and their own laptops/mobiles. - Staff should have access to all printers and secure access to our POS system. I can create a basic network diagram, but I might need guidance to set it up. Ideal skills and experience: - Expertise in Ubiquiti networking - Experience with VLAN setup and configuration - Familiarity with network security protocols

I need assistance setting up a Ubiquiti Firewall with VPN (Cloud Gateway Ultra and Unifi 6+ Access Point) to establish a VPN so I can connect to it from away. The connected network will primarily support computers, so the setup must prioritize efficiency and stability for these devices. Your expertise in Ubiquiti hardware and VPN deployments is essential to ensure the best performance. If you have experience in networking and can deliver a reliable configuration, I’d love to collaborate with you on this project.

...software so I can view live feeds and recorded clips on desktop and mobile, with role-based access control. • Clean cable runs, labeled patch panels, and a secure equipment rack to keep everything organised. • Basic hand-over training plus a simple reference document so my staff can use and maintain the system with confidence. What you’ll bring • Proven experience installing commercial-scale Ubiquiti, Cisco, Hikvision, Dahua, or similar hardware. • Ability to recommend the right mix of access points, PoE switches, NVRs, and cameras for roughly 5 doorways and a floor area of about 600 m². • Knowledge of best-practice network security (VLANs, strong encryption, secure remote access). • All necessary tools, certifications, and will...

... A back-end dashboard is also required so I can: • create and edit access plans, • view active/expired sessions, and • export basic usage statistics. I am open to the stack you prefer—common choices I have seen are PHP/Laravel or Node.js with a RADIUS server and a responsive HTML5 front end—but feel free to suggest something that fits better with hotspot hardware such as MikroTik or Ubiquiti. Deliverables: • Captive portal front end with phone-OTP login • PayPal integration (sandbox + live) with webhook confirmation • Admin panel for plan management, session control, and reporting • Clear setup guide so I can deploy it on a fresh VPS and link it to my WiFi controllers If you have prior experience building hots...

I'm seeking a skilled technician to resolve some issues with my Ubiquiti Protect system and ANPR gate access. Key issues include: - ANPR triggers not working correctly, causing plate information not to trigger the gate. Ideal Skills and Experience: - Strong background in Ubiquiti systems, particularly Ubiquiti Protect. - Experience with ANPR technology and troubleshooting access control issues. - Ability to diagnose and fix connectivity or configuration problems. - Knowledge of security camera systems and remote access setups. Please provide relevant experience in your bids.

...relevant and real. Please deliver 4 x Bi-Fold Brochure (layouts can be similar/the same just the content will be different): -Business Phone & Internet - Front Page: Main focus being Business Phones and Business Internet, Front page should clearly show this - Centre: We use our own Hosted PBX phone system as well as 3CX and Microsoft Teams Calling. We utilize Yealink Branded Phones, Ubiquiti Routers/WiFi and FortiGate Firewall equipment so happy for this to be showcased in the centre with a list of all our service offerings. -Rear: as per below -Medical Focused Managed Services - Front Page: Main focus being targeting Medical Industry. - Centre: Would like reference to the following practice management software: Best Practice, Medical Director, Shexie...

...then layer on the services we rely on most: robust firewall rules to lock the perimeter down and VPN tunnels that let branch offices and remote staff connect safely. Security, uptime, and clear documentation are non-negotiable; I’ll need diagrams, config backups, and a concise handover pack so in-house staff can perform routine checks. Please be prepared to work with leading vendor gear—Cisco, Ubiquiti, MikroTik, or similar—while keeping firmware current and settings optimised for future scaling. Deliverables • Site survey & network topology diagram • Bill of materials and procurement advice • Fully installed Cat6/Cat6a cabling and ceiling-mounted APs • Configured Server, switches, firewall, and VPN endpoints, all tested end-to-en...

...used to. I am looking for help configuring our new Ubiquiti EFG - we are replacing a SonicWall 3600. This is at our co-location facility with 20 servers (10 RDP servers, 2 web servers, 1 email server, 1 sql server feeding web servers, 3 application servers). We have about 60 IPs hosted on the servers, typically 1 per server but some have numerous for SSL certificates. We need to restrict access to some RDP servers by IP address, some by time, some by both. Currently the SonicWall is configured to work with the machines having external IPs but this can change if necessary. This is a production environment, so we'll have to proceed slowly as machines can only be moved on evenings & Sundays. We are MST. We need someone with previous Ubiquiti configuration exper...

...managed locker systems and APIs. Flowspace locker hardware vendors (regional) — check local availability. Gate & Vehicle Access / ANPR Rekor / PlateSmart — ANPR vendors for vehicle access. Magnetic or relay-based gate controllers: LiftMaster Professional series, BFT. Edge Gateways & Network Gear Cradlepoint / Peplink — cellular failover gateways for redundant connectivity. Ubiquiti / Cisco Meraki — PoE switches and network infrastructure for properties. Cameras & NVR Axis Communications — reliable IP cameras, ONVIF compatibility. Hikvision / Dahua — cost-effective (evaluate firmware/security). Genetec / Milestone — VMS for larger deployments and integrations. SIP/VoIP Infrastructure ...

I have a Ubiquiti U6-LR (v1 hardware) running OpenWRT and I need the stock LuCI interface adapted to match the workflow described in my attached spec. In short, a few labels must be renamed, several drop-down selections changed to my preferred defaults, and some advanced fields removed from view so end-users only see what they actually need. The back-end behaviour itself stays the same; this is almost entirely a presentation-layer job, but it still has to be delivered as a fully flashable firmware image that boots cleanly on the device. You’ll be working directly in the usual OpenWRT buildroot, so solid experience with LuCI, BusyBox, UCI, and the U-Boot upgrade process is essential. I also expect you to test the image on comparable hardware (or in an x86 testbed plus sysupgra...

I need assistance with setting up my Ubiquiti Unifi Dream Machine Pro for a small business network. The tasks include initial setup and configuration, network security settings, and advanced network features. This is a brand new setup with no existing equipment to integrate. Key Requirements: - Initial setup and configuration of the Unifi Dream Machine Pro. - Implementation of network security settings. - Configuration of advanced network features. Ideal Skills and Experience: - Experience with Ubiquiti Unifi products, specifically the Dream Machine Pro. - Strong understanding of network security protocols. - Ability to configure and optimize advanced network features for small business environments.

We need a thumbnail for the attached image. Text should read Ubiquiti Unifi - Cedia 2025 Font, graphics, etc up to you. Professional look. No AI , No Cartoons or scribbles

Por favor, Cadastre-se ou Faça Login para ver os detalhes.

I need an experienced OpenWRT developer to modify the firmware for a Ubiquiti U6-LR long-range v3 hardware access point. Key Requirements: - Custom User Interface: Modify the existing GUI to better suit my needs. - Minor modification to the GUI and change select options - Change some item labels - Hide options in the GUI Ideal Skills and Experience: - Proficiency in OpenWRT and firmware development - Experience with Ubiquiti devices - Strong understanding of Linux-based systems - Ability to customize web interfaces and GUIs All detailed requirements are mentioned in the attached file

I'm seeking an experienced network professional to remotely troubleshoot my Ubiquiti EdgeRouter 8 configuration. Current Setup: - eth0: Main WAN - eth3: Failover WAN - eth7: LAN with several VLANs, including several NAT devices Issue: - When I enable eth3 (failover), I lose access to the NAT devices on the VLANs. Keeping only eth0 active works fine. Requirements: - Connect via TeamViewer or other emote app - Diagnose and fix the issue Ideal Skills and Experience: - Expertise in Ubiquiti EdgeRouter configurations - Strong understanding of VLANs and NAT - Experience with remote troubleshooting

I'm looking for an experienced network engineer to configure my Ubiquiti firewall, switch, and access points for a business environment. The internet connection is via DHCP. Key requirements: - Configure WAN settings - Create VLANs 10-25 - Create VLAN 99 for management - Block inter-VLAN routing between unit VLANs - Allow VLANs to access the internet - Allow VLAN 99 to access all VLANs for management Switch Configuration: 1. Adopt 24-port PoE Pro switch in UniFi Controller. 2. Assign: • Ports 1–16 → Unit VLANs (matching patch panel). • Ports 17–20 → AP VLANs (could be same as units or a shared network). • Uplink port to UDM-SE → Trunk (all VLANs). 3. Enable PoE only on ports powering APs or in-wall switches. 4. Configure SSID...

I'm looking for an experienced network engineer to configure my Ubiquiti firewall, switch, and access points for a business environment. The internet connection is via DHCP. Key requirements: - Configure WAN settings - Create VLANs 10-25 - Create VLAN 99 for management - Block inter-VLAN routing between unit VLANs - Allow VLANs to access the internet - Allow VLAN 99 to access all VLANs for management Switch Configuration: 1. Adopt 24-port PoE Pro switch in UniFi Controller. 2. Assign: • Ports 1–16 → Unit VLANs (matching patch panel). • Ports 17–20 → AP VLANs (could be same as units or a shared network). • Uplink port to UDM-SE → Trunk (all VLANs). 3. Enable PoE only on ports powering APs or in-wall switches. 4. Configure SSID...

I'm seeking an experienced OpenWRT developer to modify the firmware for a Ubiquiti U6+ access point. Key Requirements: - Custom User Interface: - Minor modifications to GUI - Change select options - Change item labels in network settings, system settings, and device information Ideal Skills and Experience: - Proficiency in OpenWRT and firmware development - Experience with Ubiquiti devices - Strong understanding of Linux-based systems - Ability to customize web interfaces and GUIs Please read the attached PDF file before submitting any offer.

Professional configuration of Ubiquiti EdgeRouter and Cisco Switch to ensure secure, efficient, and scalable network performance. Includes VLANs, port security, routing, NAT, firewall policies, and remote access setup.

We need an experienced network engineer to configure Mikrotik/Ubiquiti devices to optimize stability and performance for our WISP. It is not one time project! Configuration should include: - VLAN - Static Routes - Point-to-Point link setup - Switching configurations Ideal skills and experience: - Proficiency with Mikrotik and UISP devices. - Strong understanding of VLANs and Point-to-Point networking - Experience in network performance optimization - Relevant certifications (MTCNA) preferred Please share examples of similar work and qualifications

...high-quality, royalty-free images from sources like Unsplash, Pexels, or other open-license platforms Content Source & References: We have gathered links from industry leaders and service providers for reference. These include pages related to: Fiber Optic Cabling Structured Cabling Audio/Visual Installations IP Cameras Wi-Fi & Ethernet Installations Brands like Cisco, Aruba, Fortinet, Ubiquiti, etc. Industries like Education, Healthcare, Cannabis, Retail, Hospitality, Government, and more Note: All reference links and structured content mapping will be provided in private chat upon request or after contract start to avoid copyright or public visibility issues. Ideal Freelancer Should Have: Experience building clean, professional, and responsive WordPress or Web...