Vtol airframe trabalhos

Project Description: I am looking for a skilled professional who can implement the inertial system adjustment function on a VTOL aircraft. The purpose of this implementation is to enhance navigation accuracy. If positioning using GPS is not possible, the aircraft continues to fly using the inertial positioning system. I am interested in the possibility of manually correcting the current position of the onboard inertial system by substituting coordinates from the Mission Planner map. Currently, the aircraft is equipped with mechanical gyroscopes. There are no specific requirements or limitations for the new system. Ideal Skills and Experience: - Experience in implementing inertial system adjustment functions - Knowledge of mechanical gyroscopes - Proficiency in enhancing navigat...

Project: Require the meshing of a fixed-wing VTOL model that will be further used for CFD analysis. Software to be used for meshing: ANSYS Fluent 2019 R3 Delivery duration: 2-3 days Project Budget: INR 1000

I am seeking an experienced aerospace engineer to design and test a viable VTOL (vertical takeoff and landing) proof of concept. The desired payload capacity of the VTOL is more than 10 kg, and the intended use is personal use. My preferred propulsion system for the VTOL is gasoline. I am looking for a candidate who possesses expert knowledge in a range of aerospace engineering disciplines, including vehicle dynamics, safety, controls and software engineering. They must also be experienced in aerodynamics and structural design methodology relevant to unique VTOL designs. The successful candidate will be required to create a set of design principles for a VTOL concept, perform detailed analyses to select appropriate components, interpret results of...

Qground specialist Tasks: - Assistance with installation and setup of Qground - No specific requirements or preferences for the setup, standard setup is fine - Ongoing support and regular maintenance needed after setup Ideal skills and experience: - Strong knowledge and expertise in Qground - Experience in installation and setup of Qground - Ability to provide regular maintenance and support...Qground - No specific requirements or preferences for the setup, standard setup is fine - Ongoing support and regular maintenance needed after setup Ideal skills and experience: - Strong knowledge and expertise in Qground - Experience in installation and setup of Qground - Ability to provide regular maintenance and support for Qground Disable safe mode in Qground, add the best dive mode in the ...

Pour une start-up aero (electrique) en allemagne (VTOL) Responsabilités : En tant que Spécialiste en Gestion de Configuration et PLM, vous serez responsable de mettre en place et de gérer les processus de gestion de configuration pour nos projets clients. Vos responsabilités principales incluront : Concevoir et mettre en œuvre les processus de gestion de configuration pour garantir la traçabilité et la conformité des produits. Développer des méthodes et des normes associées à la gestion de configuration. Mettre en place un système de gestion du cycle de vie des produits (PLM) et en assurer la maintenance. Sélectionner et configurer les outils informatiques appropriés pour la ge...

...would like have it like he's an aggressive animal, with a face with eye and mouth, and two muscle arms coming from the airframe and in the first one handing handcuffs and in the second one binoculars in front of eyes (like he s searching for catching criminals) We want our exact shape and colors for the chopper, but like it's moving( blades rotating and like a wolf or lion, a hunter...) We want it aggressive, like you don't want to mess with us! You will see in the attached files the shape and colors of our chopper, an airbus ec 135 from the French Gendarmerie. It will have a camera and a light on the skids. If possible to change the code Letter on the top of the airframe with '' MGC'' I put you some inspiration for style of a' gr...

I'm looking for a power point designer, creating professional presentations related to aircraft airframe and powerplant The successful candidate should have knowledge of power point design, topics will be provided in power point format

I am looking for a drone designer and manufacturer who specializes in creating fully autonomous drones for surveillance purposes. The drone must have the ability to carry a large payload capacity of over 10 kg. Ideal skills and experience: - Experience in designing and manufacturing VTOL and fixed-wing drones - Knowledge of autonomous control systems and sensors - Ability to integrate and develop custom sensors for surveillance purposes - Understanding of aerodynamics and propulsion systems - Familiarity with CAD software for design and prototyping TOTAL 2 DIFFERENT MODELS The final product should be a reliable and efficient drone that is capable of carrying out surveillance missions with minimal human intervention.

I need the expertise of a propulsion engineer to help design a fan and how it interacts with the main lift surfaces. Before I share any designs and information, I would need an NDA signing

I essentially need 3 aerofoil shaped wings attached to each other in CAD software.

Matlab simulink results needed for attitude stabilization of a vtol quadrotor aircraft

Need a report reviewing a research paper named "Attitude Stabilization of a VTOL Quadrotor Aircraft". Related to control engineering

Hello guys i am looking for someone to help me overcome the following problem for my agricultural drone project: 1) calculating thrust requirements 2) estimating approximate motor specs for the drone 3) If possible- suggesting an approx Propeller dimensions (just length & width) 4) suggest the ideal shape of the drone to cover long distance i.e Quadcopter or VTOL configuration 5). Ideal battery requirement/alternative propulsion suggestions. Overview: I am making an agricultural drone concept (for my hobby purpose) to help in agricultural activities. The overview is that these drones would travel in pairs to cover an land of wide width and length. I will share more details via chat. The drones would operate in hilly and high altitude regions. Notes: The freelancer should s...

Hello,i am looking for guys to create me an drone sketch (similar to those on patent drawing) for my project presentation. The drone contains modular design meaning that it can be folded and the battery can be easily swapped and the overall drone would be easy to carry. The Drone is based on quadrotor or VTOL type,i would confirm that via chat. I want the freelancer to design and give both sketch and rendering image of the drone. The sketch need not has to be extremely accurate but it needs to show the battery swap and wing foldable features. And an graphical image from top angle to visualise drone navigation (similar to map view). I would make it clear in the chat. It's an agricultural drone model .

The wing will be used to replace a basic rectangular wing on an existing airframe. I have the necessary measurements but need help engineering the wing and creating a prototype on solid works. I will need multiple test done including roll rate, stall speed and characteristics, G-loading at specific weights and so-on.

Role: UAV System Engineer Location: Remote You will join a h...aircraft. 4. Familiarity with UAV platforms and stacks, like Pixhawk, DJI, Ardupilot and PX4, Mavlink, DroneKit. 5. Experience in using flight-planning and ground control station software. 6. Knowledge of interfaces and protocols such as USB, I2C, UART, SPI, Ethernet, CAN, ROS2 7. Knowledge of 8/16/32 Microcontrollers (STM32) and Hardware Schematic. Responsibilities: - Flying Multicopters or VTOL - Compliance with DGCA regulations - Maintaining flight logs - Maintaining multi-copter in airworthy conditions - Taking care of Multi-copter safety and avoid accidents - Responsible for Firmware and Hardware: Skills Required: Pixhawk, PX4, flight controllers, Ardupilot, Dronekit, USB, I2C, UART, SPI, Ethernet, ROS2, ...

UAV VTOL KRILATICH 2.0 , is autonomously unmanned aircraft wing span about 3400mm , max takeoff weight up to 50kg, payload up to 10kg, full electric , full fiber carbon, max speed to 120kmph. We need construction design and configuration like as in attachments! Budget for you is not fixed but we expect correct. please answer me as soon as possible!

...hydraulic power units, hydraulic lift platforms, forklifts, compressed gas cylinders, etc.) The employee is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. Ensure all customer property is properly protected. Job Requirements: Qualifications: High school diploma or equivalent. Read, write, and understand the English language with the ability to communicate effectively Airframe and Powerplant License. Minimum 2 years general aviation aircraft related experience or have demonstrated knowledge, skills and abilities required to perform all job tasks. Knowledge of all aircraft mechanical systems functions and interactions. Thorough working knowledge of all current FAA regulations and ATA codes. LMA Conformance Statements In the performance of their respect...

I'l looking for someone who can draw a 3D model of our project aircraft: the full airframe with interior views (cockpit and cargo bay) details of some equipment. Thank you

Hello, all I'm looking for MATLAB design of PID design via Root Locus for VTOL system and a report as due the attached file. The report should be done in 12th of Dec. The parameters to be used are J (Kgm^2): 7.50E-04 OS spec: 20 Tp spec (s): 0.15 Please contact me if you are interested. Kind Regards.

We are looking for a team of structural engineers and interior designer To Create a interior for our First Spacecraft. We use Naval Building Methods to build Our ships so that is a must when Engineering the requested Interior. If you or your team has what it take to complete this contract let us know below and become a part of history. Good luck. (images for inspiration.)

We need AutoCAD engineers to create our first airframe. We need a draft design in 3d and 2d blue prints. We are forming a team to help us crate our first Spacecraft, currently we need someone to create a full 3d stl. file of our spacecraft. It will need to contain a outer view and internal steel framing a top and bottom floor. similar to the 600i from Star Citizen space sim.

Hi This is a part of project for vtol drone for monitoring and surveillance . This project scope is like this; 1. GCS with front-end, back-office for multiple drone mission and operations, mission logging/waypoint generation and system data integration 2. Once implemented, integration with existing GCS for system upgrade Other infra considerations; 1. cloud computing resources 2. local development setup Tools; Github, Teamviewer, Timux-terminator, etc Budget: USD 800 Deadline: 2 months

Hi This is a part of project for vtol drone for monitoring and surveillance . This project scope is like this; 1. GCS with front-end, back-office for multiple drone mission and operations, mission logging/waypoint generation and system data integration 2. Once implemented, integration with existing GCS for system upgrade Other infra considerations; 1. cloud computing resources 2. local development setup Tools; Github, Teamviewer, Timux-terminator, etc Budget: USD 800 Deadline: 2 months

Hi This is a part of project for vtol drone for monitoring and surveillance . This project scope is like this; 1. GCS with front-end, back-office for multiple drone mission and operations, mission logging/waypoint generation and system data integration 2. Once implemented, integration with existing GCS for system upgrade Other infra considerations; 1. cloud computing resources 2. local development setup Tools; Github, Teamviewer, Timux-terminator, etc Budget: USD 800 Deadline: 2 months

...main goal is to offer aviation-based training and education to rural Wyoming Residents and High School Students using the STEM method of teaching at little or no cost. Wyoming's main industry involves oil and gas and any down turn in that would cause a major hardship for residents in rural areas especially in Carbon County. Valley Wings would like to offer flight training or an introduction into airframe and power plant maintenance to those that are unemployed or under employed. This skillset would provide an opportunity to gain a valued and needed skill to fill foreseeable job vacancies in the aviation sector and create jobs locally in Carbon County and Wyoming. About the founder: Scott Allison had a dream of flying since childhood. He started his flight training in 1992, ...

Hej Jeg leder efter een der kan programmere i PX4, pixhawk. Det skal bruges til flyve en experimental VTOL, så der kommer til at være en masse sjov med flyvninger og test. Mvh Rasmus ------ Hi I'm looking for someone who can program in PX4, pixhawk. It needs to be used to fly an experimental VTOL, so there's going to be a lot of fun with flights and testing. Sincerely Rasmus

My company specialises in Search and Rescue operations. My project is for a proof of concept to deliver aid to those in need even when...communications link. If the pilot then descend to low level the communications link will be lost. I would like a small fixed wing drone with image recognition. I would like the drone to be able to recognise a person or a vehicle and be able to autonomously fly to the person/vehicle without being controlled by a pilot. The drone itself is not important at this time, it can be in any fixed wing airframe. The important part is the ability for the drone to be able to autonomously fly to a target based on image recognition. Ideally I need a system that is compatible with Pixhawk and Ardupilot.

looking for someone to design and build test unit, Drone Flight control board. (VTOL, fixed wing, ground vehicle, and multi-copter) (GPS/RTK) Payload integration

...print candidates data for the Client and B-Client user role. 2. Archive page should have a filter like in the PSD file. If the user isn’t logged in can’t see any content except the login/register form popup. Results should populate automatically when search/filter criteria changed, without the need to press the search button (ajax). Advanced search should have check-boxes with ACF fields: -Airframe Type -Engine Type -Records Audit -Project City ( Database city field with country) -Computer Skills Country drop-down should show only countries that have candidates in, or countries that candidates have set to bordering countries. Every candidate have a profile rating field in the ACF which can be from 1 – 5 The result should first show all candidates with ...

...print candidates data for the Client and B-Client user role. 2. Archive page should have a filter like in the PSD file. If the user isn’t logged in can’t see any content except the login/register form popup. Results should populate automatically when search/filter criteria changed, without the need to press the search button (ajax). Advanced search should have check-boxes with ACF fields: -Airframe Type -Engine Type -Records Audit -Project City ( Database city field with country) -Computer Skills Country drop-down should show only countries that have candidates in, or countries that candidates have set to bordering countries. Every candidate have a profile rating field in the ACF which can be from 1 – 5 The result should first show all candidates with ...

I need someone to graphic design/illustrate drone concept art. I’m looking for someone to 3D illustrate/render the ‘base station’ and drone sketches in the attached - 3 images total. The photo realistic renders provide example of the drone airframe shape I want. It’s for a university concept pitch. It would help if you can share examples of similar artwork you’ve done previously. Let me know if you have any questions. Thanks

My hardware; DJI S1000, S900 and custom airframe with wookong and A2 need hardware and software customization. The three~some come with the gimbals which also need to work with the Futaba controller (receiver R7008, etc) I will be using them along with the Futaba T14SG, 8SG on Dji Assitant. Pixhawk Cube is on a quadcopter airframe, which stopped arming and I don’t have any clue. My budget: usd 150 with install, customization and documentation

My hardware; DJI S1000, S900 and custom airframe with wookong and A2 need hardware and software customization. The three~some come with the gimbals which also need to work with the Futaba controller (receiver R7008, etc) I will be using them along with the Futaba T14SG, 8SG on Dji Assitant. Pixhawk Cube is on a quadcopter airframe, which stopped arming and I don’t have any clue. My budget: usd 150 with install, customization and documentation

It is a mini RTF airplane, we just need the airframe, ideally, 3D printed, made of plastic that can withstand rain. Like this one:

is the next generation Aerospace Organisation focusing on the Research and Development of Autonomous Aerial Vehicles (AAV) with Vertical Takeoff and Landing (VTOL). Our main focus is to Redefine Urban Transportation, Military, Emergency Response & Space Research. will be building a safe, reliable & innovative airspace transportation system through a fleet of Autonomous Aerial Vehicles (AAV). : Urban Mobility Redefined. Welcome to the Future !!! Have a look into our project concept showreel: We need to develop the "OFLY" Token sale contract with all advanced contract functions. The sale should happen with USDT, USDC and DAI. The UI/UX for the token sale page should connect to the investor wallet

I am working on a project and facing problems in the dynamics and structure part of it and looking for a person who has a great understanding of dynamics and advanced structures ( Airframe structures)

...company is among pioneers specialized in development of multirotor electrical vertical take-off and landing aircrafts, with strong and dedicated software and hardware engineering team, with in house developed and proven technology and 15+ years of experience, among the few demonstrated manned flights. We are looking for aesthetical refining of overall 3D design concept of cockpit and its internals, airframe and landing gear, yet keeping proven aircraft configuration. Ideally design concept must follow single seat, dual and four seat variants, yet keeping design lines through the different versions. Our requirement is Solidworks design files, although for visualization purposes others platforms can be used as well. We can provide the guidelines for aircraft configuration varia...

Hi Dharamveer S., Looking for someone to do our hang-glider in Blender/GLTF. Here are some pictures: We have CAD models for the details as well as the wing, which need to be redrawn in Blender (but matching the same profiles): Could you do it to this quality? What are the milestones? What will it cost?

Hi Claudiu C., We're looking for someone who can do our hang-glider in Blender. Here are some pictures: We have CAD models for the details as well as the wing, which need to be redrawn in Blender (but matching the same profiles): Could you do it to this quality? What are the milestones? What will it cost?

Hi, I need all kind of help to create a Hoverbike/VTOL Personal Aerial Transportation, at lowest cost possible but with a highest efficiency possible. I am open for suggestion related to the Source of power. Speed up to 85 MPH, Up to 2 person (pilot and one more), Thrust power to be discuss. Delivery time to be discuss. Operation System could be from open sources OS. BCI (brain computer interface) are also welcome. About me, I have basic knowledges in programming, Social Media management, Accounting Manager. I know my request is not an a "usual" idea you see here, but big ideas come from unexpected ideas. Thanks in advance.

I have CAD and GLB models of a hang-glider wing (the sail) and hang-glider airframe (the aluminium frame) in these two repositories. These models need to be redrawn in Blender so that they are optimized (CAD does not output efficient triangles). Various photographs are here, * The airframe inside the sail does need detailing because you see it as a shadow. The airframe outside (the triangle below the wing and the post above the wind) needs detail on the junctions that is shown in the CAD model. * The wing needs dividing into panels that can be set to different colors and textures. I would like

Hi I’m doing a project on a wing airframe and i need to do some structural analysis. I need some guidance in the solid works of the project and an analysis of the entire wing. If you accept this project i will further provide you for more information Kind Regards

We need someone to design VTOL Aircraft Design using 4 jet engines and jet fuel for 10 passengers and two pilots.

The mission consists of integrating a "Pixhawk" autopilot on a Remotely Controlled Air Vehicle using proprietary technology to convert the air vehicle from fixed-wing to VTOL mode. The algorithm will be developed from a MATLAB model encompassing simulations and experimentations data. Note: The required algorithm will have to provide an active stabilization in fixed-wing (horizontal mode).

For a drone project (vtol) I want to develop a flight computer that can fly the drone from point A to B. - low code such as python3.8 - use of Google Maps, OpenStreetMap or Mapbox - DroneKit or other app - Being developed on a Raspberry Pi P4 - The goal is that the route is followed on the map and commands are given back to the drone so that it can follow the route line. The route line has margins. If the drone stays within these margins, it will be fine. Once the drone is out of the margins, commands must be sent to the drone so that it is back within the margins

I am building airframe components, I'm looking for someone to consult a short while to find a cost-effective moldable mixture for use as a replacement for carbon fiber/fiberglass. Please consider a wide variety of materials additives, mixture ratios, and epoxy resins to come up with a composite material that has comparable strength, weight, and temperature resistance characteristics.

Por favor, Cadastre-se ou Faça Login para ver os detalhes.

I am an independent inventor trying to create a 3D model for a small vertical-takeoff-and-landing (VTOL) aircraft. I need someone with moderate-to-serious expertise in AutoCAD to complete the 3D model of the aircraft. Only applicants from the US, Canada, England, or Australia, who are completely fluent in English, will be considered. There are a lot of twists and turns in the invention/drawings and there cannot be any confusion about what I am describing. Experience in the mechanical arts is also desired. I can draw in AutoCAD only in 2D, but not in 3D. I require the assistance of someone that can finish the 3D models based on what I send you (sketches, prior models, layouts, etc.). Half of the invention has already been drawn in 3D and I have a master file of the overall inv...

I need to over write the existing firmware on an rc flight controller via a usbasp programming dongle, but first need to update the firmware on the usbasp device via a nano arduino board. This involves installing java etc. The fimware I need on the flight control board is open aero vtol and I have the correct hex file available. I need to be able to use the usbasp on a repeat basis to change firmware on these boards and so need someone who is fluent with this system to sort it out for me as a job..