CAD 3D Jobs

I need a production-ready 3D model of a new item that will be molded in expanded polypropylene (EPP). The file you create has to serve directly for manufacturing, so wall thicknesses, draft angles, undercuts and parting lines must be considered from the outset. Here is what I already have: • A rough hand sketch with basic dimensions and functional notes • Reference photos of similar EPP parts that demonstrate the finish and level of detail I’m after Your job is to turn that information into a clean, fully parametric CAD model. I work mainly with STEP files, but if you prefer SolidWorks, Fusion 360 or similar that is fine as long as a neutral STEP file is included in the final hand-off. Deliverables 1. Native CAD file (SolidWorks, Fusion 360, or equivalent) 2. Expo...

I already have a printable-looking STL, yet it still needs genuine structural work. Your task is to open the model, clean up any non-manifold or intersecting geometry you discover, and then introduce the new features I will specify—mainly holes or cut-outs in set locations and diameters. Once the cut-outs are in place, run a final mesh check to be sure the file remains watertight and error-free, then export the updated STL (and optionally a STEP or OBJ if that helps you validate edge integrity). I’ll provide a marked-up image or drawing with exact positions and sizes the moment we start. Deliverables • Repaired, manifold STL with requested holes/cut-outs • Screenshot or brief report confirming all mesh checks pass in your preferred tool (Netfabb, Meshmixer, ...

For my university project I must illustrate how an ocean-based habitat can tap three independent power sources—OTEC, wave motion and on-site methane generation—and bring them together into a single, workable energy network. I only need a clear, schematic-level model, produced in Fusion 360 (or an interchangeable CAD package), that shows the relative placement of each harvesting unit, their link to a common storage buffer, and the routing that feeds stable power into the habitat. The model does not have to dive into detailed component geometry; scaled blocks, pipes and conduits with labels are fine so long as the layout reads logically and every interface between the three systems is visible. File should open cleanly in Fusion 360 and include enough annotations or exploded vi...

I need a CAD file created for a custom-shaped plastic frame. You will need to create accurate CAD drawings based on the physical frame I will provide. Requirements: - Measure and include full frame dimensions - Create a precise CAD model to be 3D printed - also to print of possible Ideal skills and experience: - Proficiency in CAD software (SolidWorks, AutoCAD, etc.) - Experience with custom shapes and plastic components - Ability to work from physical objects without existing drawings

I am building an ongoing pipeline of work that relies heavily on Rhinoceros 3D and need a seasoned user I can trust for the long haul. Typical assignments will range from converting loose sketches into clean, watertight models to refining existing files for presentation, fabrication, and occasional rendering. Turnarounds are sometimes tight, so speed matters, but not at the expense of accuracy or organized layer structure. You should be fully comfortable with Rhino’s modelling toolset (NURBS, SubD, and solid operations), file-clean-up best practices, and exporting assets for downstream software such as KeyShot, V-Ray, or 3D printers. Grasshopper experience is a bonus; if you script your way through repetitive tasks, even better. I work iteratively: we agree on a milestone, you send...

-The person who accepts this job must have or be able to obtain the Xplorer Grip Pro case.- -Only 3D scans in .stl or .step format will be accepted. -The use of any AI platform for the creation or recreation of this is not permitted. -The use of mobile phones for 3D scanning is not permitted. -The 3D scan must be done with an amateur or semi-professional scanner. The link for the product I want to scan is the following link:

**Job Title:** PEB Structural Detailer – Shop & Erection Drawings (AutoCAD) **Job Description:** We are seeking an experienced Pre-Engineered Building (PEB) Structural Detailer to develop a comprehensive set of Shop and Erection drawings based on our provided General Arrangement (GA) drawings. The ideal candidate will have a strong background in steel detailing and must be proficient in AutoCAD (specifically AutoCAD LT 2025 compatibility). You will be responsible for translating engineering designs into precise fabrication and field-ready documents. **Scope of Work:** **1. PEB Shop Drawings (Fabrication Details):** * **Primary Members:** Detailed fabrication sheets for built-up columns and rafters (I-sections), including plates, stiffeners, and base plates. * **Secondary Mem...

I need a clean, highly detailed 3D model of a semiconductor at the chip level. The goal is strictly visualization, so accuracy in visible structures, proportions and materials takes priority over simulation-ready geometry. You will receive the reference drawings and any dimensional data I have as soon as we start; feel free to suggest additional views or measurements that will help you model the die, package and bond-pad layout convincingly. Realistic materials, basic lighting and camera setups that make the chip look photorealistic in standard renderers are welcome, but polygon efficiency is less important than visual clarity. Deliverables • The finished chip-level 3D model in a commonly-used format we agree on up front (OBJ, STL, native CAD or similar) • A short note des...

I have fourteen scooter components in STL format that were captured by 3-D scan. Instead of a simple mesh-to-solid conversion, I need each one rebuilt as a clean, fully-defined, production-ready model that can be edited later. Scope of work • Create a native, history-based model of every part and export it as STEP. • Produce dimensioned 2-D drawings (PDF) for every component. • For the sheet-metal pieces— all in steel— supply flattened DXF files ready for laser cutting. All parts share roughly the same level of complexity, so you can quote a single price for the full batch. I’m flexible on the software; SolidWorks, Fusion 360, AutoCAD or any other reputable parametric platform is fine as long as the delivered files open cleanly in mainstream CAD progr...

I'm seeking a skilled 3D designer to create a detailed STEP drawing of a mechanical part, specifically a radio. The part is primarily made of composite material. Requirements: - 3D STEP drawing - Detailed with dimensions Ideal Skills: - Proficiency in 3D modeling software - Experience with composite materials - Attention to detail and accuracy in technical drawings

I have an existing softwood staircase in a residential setting that now leads up to a small cold rolled metalmezzanine. I need a Washington-licensed engineer or architect to prepare permit-ready, signed and sealed drawings that document the stair “as-built” and show a code-compliant guard-rail attachment detail for the mezzanine edge. I can supply field measurements, photos, and any sketches you need; you take it from there—verifying dimensions, creating clear plans, sections, and connection details that satisfy the current IRC and local WA amendments. Deliverables (PDF + CAD): • One sheet set showing the existing softwood stair, fully dimensioned and labeled as built • One sheet with the proposed guard-rail design, attachment details, fastener specs, an...

I have a series of bold statement fashion rings sketched out and I now need them translated into precise 3D CAD files. Each piece will eventually be produced in gold, silver, and platinum, so I’m counting on accurate dimensions, correct tolerances for casting, and clean file organisation that makes material swaps straightforward. What I’ll supply – Hand-drawn concepts with measurements and reference photos – Finger sizes and stone specs (where applicable) What I need from you • A full 3D model of each ring in a mainstream jewellery package such as Rhino, MatrixGold, or similar, plus production-ready exports (STL for printing and STEP or 3DM for editing). • High-quality renders that clearly show metal and stone finishes for client approval. ...

I already have a printable-looking STL, yet it still needs genuine structural work. Your task is to open the model, clean up any non-manifold or intersecting geometry you discover, and then introduce the new features I will specify—mainly holes or cut-outs in set locations and diameters. Once the cut-outs are in place, run a final mesh check to be sure the file remains watertight and error-free, then export the updated STL (and optionally a STEP or OBJ if that helps you validate edge integrity). I’ll provide a marked-up image or drawing with exact positions and sizes the moment we start. Deliverables • Repaired, manifold STL with requested holes/cut-outs • Screenshot or brief report confirming all mesh checks pass in your preferred tool (Netfabb, Meshmixer, ...

I’m planning a playful backyard fountain and need a 3D model of a sleeping Blastoise. The pose should feel peaceful—think head resting on folded arms—while still keeping the two back cannons exposed so I can run tubing through them for the water jets. A clean, low-poly or moderately detailed sculpt is fine; there’s no need for intricate surface texturing or complex internal channels beyond a straight passage through each cannon. I’ll be printing in plastic, so keep wall thicknesses and overhangs printer-friendly. Please supply the final file in STL format; that’s the only file type I’ll need. There’s no strict deadline, so take the time you need to get the proportions and flow paths right. Deliverables • Watertight STL file of the co...

I have a residential project that is moving into fabrication and erection, and I now need complete structural-steel detailing produced in accordance with AISC/ASTM industry standards. The scope covers every major steel element in the house—beams, columns, all welded and bolted connections, plus the staircases and their associated railings. Please translate the engineer’s intent into clear, clash-free drawings ready for the shop and site. I will supply the architectural/engineering plans and any 3-D models already generated; you return a full set of coordinated steel sheets, connection sketches, and fabrication data. Deliverables (in DWG and PDF) • Fully dimensioned shop drawings for beams & columns • Connection and joint details with weld symbols and bolt sc...

I need a professional CAD designer/engineer to create a manufacturing-ready 3D model of a bear-shaped beverage container for extrusion blow molding (HDPE). This is a functional product — not just a visual sculpture. I need a properly engineered CAD model delivered as a STEP file, suitable for tooling. Product Overview -Approx. 12” tall -~40-55 oz capacity -Filled through belly opening (~72 mm diameter) -Drunk through mouth opening (16–18 mm ID) -Single-piece, single-color matte HDPE part Manufacturing Requirements -Designed specifically for extrusion blow molding -2.0–2.5 mm nominal wall target -3–5° draft where required -No undercuts or trapped geometry -Fully blended arms/ears/feet (no crevices) -Clear parting line -All edges radiused -Blow-mold frie...

I'm looking for a creative freelancer to design and possibly fabricate a beer bong styled after a bear. The beer bong should be made of plastic and can be any single color. Key Requirements: - Design a beer bong in the shape of a bear - Use durable plastic material - Available in any single color of choice -needs to be a STEP file or similar CAD file - able to be blow molded Ideal Skills and Experience: - Experience in product design or 3D modeling - Ability to work with plastic materials - Creative design skills, especially for themed items Please provide samples of previous work if available.

I need a skilled CAD designer specializing in mechanical design. The project involves creating detailed designs for structural machine parts. Ideal skills and experience: - Proficiency in CAD software (e.g., SolidWorks, AutoCAD) - Experience in designing structural components - Strong understanding of mechanical engineering principles - Attention to detail and accuracy

I'm looking for a skilled 3D designer to create a cover/tool tray for an engine carburetor. The design needs to be optimized for 3D printing using ABS material (or other material if needed). Key Requirements: - The design should be functional and fit perfectly on the specified engine component. - Must be suitable for 3D printing with ABS. - Should consider durability and some heat resistance. Ideal Skills and Experience: - Proficiency in 3D modeling software (e.g., SolidWorks, AutoCAD). - Experience with designing parts for 3D printing, especially using ABS. - Knowledge of automotive components and their specifications.

I have three separate sets of .stl files that need to be brought to production-ready quality. • Set A (1 group of files) – fix geometry issues: non-manifold edges, inverted normals, stray vertices, or any other problems that would cause slicing errors. The final files must be watertight and clean so they import flawlessly into PrusaSlicer and Cura. Set A is made up of three major pieces which currently to not fit together acceptably. In addition, satellite modules need the addition of bayonet/socket joints to allow for easy assembly. • Sets B & C (2 groups) – add specific features and surface detail that I will supply as sketches and reference dimensions. Please keep overall part size unchanged while integrating the new elements smoothly into the existing mesh...

I need intermediate-detail Solidworks renderings for 900 parts within a month. Requirements: - Intermediate level of detail - Standard material colors - Deliverables in STEP/IGES format Ideal Skills and Experience: - Proficiency in Solidworks - Experience with high-volume rendering projects - Attention to detail and ability to meet deadlines

I'm seeking a skilled 3D modeler to create a diorama of the military base I was stationed at in Vietnam. I only have one decent photo of my barracks. Requirements: - 3D model with intermediate detail like windows and textures. - Model includes: 6 two-story barracks, 5 single-story work buildings of similar width and length, and 2 additional buildings (details to be provided). - Provide in a format compatible with 3D printing (STL, OBJ, or 3MF). Ideal skills and experience: - Proficiency in 3D modeling software. - Experience with architectural and military structures. - Familiarity with 3D printing requirements and file formats.

I’m reconfiguring a manufacturing warehouse that receives and stages raw materials, and I need a clear, professional layout that tells my team exactly where every pallet, rack, aisle, work cell, and safety zone belongs. The floor plan should account for inbound unloading, quality-check stations, short-term storage, and seamless feed lines to production. Your deliverable will be a complete set of drawings—PDF plus an editable CAD file—that includes precise dimensions, equipment placement, material-handling routes, and marked emergency exits. I’ll share the current shell drawing and inventory data once we start. Please use any industry-standard tool you’re comfortable with (AutoCAD, SketchUp, Revit, etc.) but make sure the files can be opened in AutoCAD 2021....

I need a 3D printable STL file of a fantasy-themed airship for my Dungeons and Dragons game. The airship should have 3-4 deck levels and be large enough for player miniatures to be placed on. Key Requirements: - Fantasy design, moderately detailed exterior - 3-4 stackable deck levels for gameplay - Decks must be able to unstack for play, then reassemble into a whole airship Attached photos are for reference of design layout, and an example of the decks coming apart for gameplay. Ideal Skills and Experience: - Proficiency in 3D modeling software (e.g., Blender, Tinkercad) - Experience creating detailed and mechanically sound STL files for 3D printing - Understanding of fantasy design elements and D&D gameplay mechanics

I need a highly detailed 3D model and STL file of an air intake box upgrade for my car. Requirements: - 3D model of the air intake box. - Use the attached mesh scan (OBJ/PLY format) as reference. - Model should be highly detailed with textures and fittings. Goals: - Increase airflow. - Improve filtration. - Enhance engine performance. Ideal Skills & Experience: - Expertise in 3D modeling. - Proficiency with OBJ and PLY formats. - Experience in automotive components design. Please provide samples of similar work.

I need a complete Fusion 360 model for a mechanical assembly that brings together bolts and screws, brackets and supports, plus motors and gears into one cohesive unit. The finished file must be fully constrained so every component moves exactly as it should, with joints clearly defined and named. Deliverables I expect: • The native Fusion 360 (.f3d) file containing the full assembly • An exploded view and motion study that demonstrates the mating relationships • 2D drawings with critical dimensions, hole call-outs, and thread specs ready for shop use • A simple bill of materials generated inside Fusion showing quantities and part numbers I’ll supply rough sketches and the key dimensions the moment we start; you translate those into a clean, parametr...

I need ongoing help turning my existing HVAC AutoCAD drawings into fully-featured SolidWorks models. The work centres on Capture Jet hoods, canopies, AHUs, extract ceiling tiles and similar items, and the real focus is getting every HVAC component modelled with the right level of detail so the assemblies are ready for manufacture and easy to re-use. You will be receiving a batch of DWG files each day, along with reference photos or PDFs. From these you will create native SolidWorks parts and assemblies that respect our company-specific modelling standards (naming, configurations, custom properties, revision tables, colour codes, etc.). I will supply the standards document and a few finished models so you can mirror the workflow and file structure from day one. Accuracy of dimensions obvi...

I need a 3D drawing of a pillow. The drawing should accurately represent the shape and dimensions of the pillow. Ideal Skills: - Proficiency in 3D modeling software - Experience with textile and soft goods - Attention to detail in shape and dimensions Please provide samples of similar work.

Por favor, Cadastre-se ou Faça Login para ver os detalhes.

I need Autodesk Inventor 2025 training session that takes the team from zero knowledge straight to confidently using the advanced Sheet Metal environment. The priority is a deep, practical understanding of sheet-metal rules and parameters—how to set up K-factors, bend tables, corner reliefs and material styles so parts flatten precisely and export cleanly for production. Here is what I want to achieve with you: • Build a quick foundation: workspace navigation, sketching and modelling just far enough that I can follow the later demonstrations. • Dive into the sheet-metal workflow: Cut, Bend, Contour Roll, Lofted Flange and Punch Tools, always relating each feature back to the governing rules & parameters. • Create and manage custom sheet-metal rules, test them...

I need AutoCAD drawings revised, specifically for relocating elements. Key Requirements: - Relocate piping layout on the suction of a pump skid. Ideal Skills and Experience: - Proficiency in AutoCAD - Experience with mechanical layouts and piping - Attention to detail and accuracy - Ability to follow specific instructions and make necessary layout changes

Necesito que modeles una pieza individual en SolidWorks o, si lo prefieres, en Fusion 360. El objetivo principal es generar un modelo atractivo para presentación visual, por lo que no hace falta preparar archivos para producción en masa, pero sí debe apreciarse la geometría real y un acabado pulcro. Alcance: • Modelado de la pieza con nivel de detalle medio: contornos y features fieles, sin llegar a tolerancias de ingeniería fina. • Aplicación de materiales y texturas básicas que ayuden a resaltar la forma y el acabado final. • Entrega del archivo nativo (SLDPRT o F3D) junto con un .STEP genérico y al menos dos renders en alta resolución listos para insertar en un documento o presentación. Aprecio co...

I have a complete pinion-bridge assembly modeled in SolidWorks that now needs to live inside Fusion 360 as a fully native, history-based design. The goal is straightforward: every feature you see in the current SolidWorks file must be rebuilt—or accurately translated—so the timeline, parameters, joints, and component hierarchy behave as if the part were created in Fusion from day one. The converted file will be fed directly into our Production/Manufacturing pipeline, so dimensional fidelity, preserved constraints, and editable parameters are critical. A simple “dumb” solid export will not be accepted; I need the model to remain fully parametric for future machining updates and CAM operations in Fusion 360. Deliverables • Native Fusion 360 (.f3d) file with...

I need a precise technical drawing for an extension spring that will be fitted into industrial-machinery assemblies. The spring must reliably handle a medium load while being manufactured from spring steel grade 2. The drawing has to show every critical dimension—wire diameter, outside diameter, free length, coil count, hook style, and any tolerances—so a tooling shop can proceed straight to production without additional clarification. A simple 2D CAD sheet is fine, but if creating a 3D model speeds up your process or improves clarity, feel free to include it as well (STEP or IGES preferred). Handing over the native CAD file plus a PDF print is all that’s required. Once I confirm the dimensions and notes match the specifications, the job is done and paid in full.

I need a 3D visualization of a conveyor system with a gantry-style robot. The visualization should include: - Basic shapes for components - 3D perspective view - Pallets moving on a custom path Ideal skills and experience: - Proficiency in 3D modeling software - Experience with conveyor systems and robotic elements - Ability to create simple animations for moving parts Please provide a sample of similar work.

I need a basic outline of narrowboat widebeam plans based on a picture I got form the internet, on of the photos provided is for a 63 feet, and another is for about 65 feet, and another of 60 by 11, but I want a shorter one, empty inside, at the end I would like an Autocad file Requirements: - Create an outline with the following dimensions: - Length 60 feet - Width 12.6 feet wide - Depth Unknown - Recommendations for dimensions are welcome Ideal Skills and Experience: - Experience in boat design - Ability to interpret images into scaled drawings

I’m setting up an ongoing collaboration with a seasoned mechanical design specialist who can jump in whenever new projects hit my desk. Most assignments revolve around translating product concepts into manufacturable parts—solid CAD models, detailed drawings and the occasional design iteration to tighten tolerances or reduce cost. What matters to me is consistency and availability over the long haul. If you’re comfortable taking rough sketches or functional requirements and turning them into clean, production-ready designs, we’ll get along well. I typically work in SolidWorks, but can accommodate other mainstream CAD platforms if that’s your preference. Every task will come with clear objectives, reference files, and deadlines. In return I’ll expect na...

Project Title: Technical Manufacturing Drawings for Custom Table Base – 3 Interconnected Legs with Complex Angles & Rounded Profile Project Description: I need a skilled freelancer to create detailed technical drawings for a custom table base consisting of three sculptural legs. The tabletop will be made separately later. I have reference photos from online (I do not have access to the physical table), so the freelancer will need to work from these images to create a proportionally accurate and structurally sound design. Key Details: • Scope: Drawings for the complete leg assembly only (3 pieces). The tabletop is a separate future project. • Tabletop Size: The tabletop will be 366 cm in length. The legs must be designed to proportionally suit a table of this size and pr...

I'm looking for a skilled 3D designer to create high-detail visualizations of industrial machinery and equipment. These graphics will be used for product visualization purposes. Key Requirements: - Expertise in 3D modeling software (e.g., Blender, 3ds Max, AutoCAD) - Proven experience in creating realistic and detailed industrial machinery visuals - Strong understanding of industrial design and engineering principles - Ability to meet deadlines and communicate effectively Ideal Skills and Experience: - Portfolio showcasing high-detail 3D industrial graphics - Strong attention to detail and accuracy - Experience with texturing, lighting, and rendering Please provide samples of relevant work with your bid.

Our CAMduct environment needs a full tune-up so it becomes a single, reliable source for estimating, detailing and releasing MEP parts to the shop floor. The current database is inconsistent—pressure classes are incomplete, labor tables conflict with materials, and export files still need hand-editing before they reach the plasma or coil line. What has to happen: • Clean, rebuild or import a fresh CAMduct database with correct materials, gauges, pressure classes, seams, connectors and ancillary items. • Link cost and labor tables so that take-offs immediately generate accurate estimates and reports. • Standardize item numbering and develop templates so detailers can drop components straight from Revit/AutoCAD into CAMduct without remapping. • Validate th...

check of fuselage frames and wing ribs positions

This project requires CAD-based 3D modeling for FDM 3D printing. Please start your bid with the word “FDM” to confirm you understand this is not a logo/vector design project. I need an original challenge coin designed to showcase the Creality K2 Pro’s multi-color FDM capabilities, while remaining durable and cleanly printable. This is a physical product design project, not a 2D artwork conversion. Our club colors are maroon and grey; please use them in the design. A third or fourth accent color is acceptable (maximum of four total colors). All aspects of the coin design are open to professional recommendation if it improves durability, print quality, or multi-color performance. Design Direction The design should sit in the moderate detail range: Clean, readable sur...

I need a detailed finite element analysis that zeroes in on stress distribution within an endodontically treated tooth restored with a Post and Core. The model should replicate clinically realistic geometry, material properties (dentin, gutta-percha, cement, fiber/metal post, core build-up, and if convenient the overlying crown), plus the typical occlusal and lateral load cases. What I will supply • Reference papers, anatomical images, and the loading scenarios I want reproduced. • Any additional clinical notes you may need to refine the boundary conditions. What I expect back • A clean 3-D CAD model ready for meshing. • The fully set-up FEA project file (ANSYS, Abaqus, COMSOL, or a comparable package—use whichever you work fastest in). • High-res...

I’d like a faithful, wearable recreation of Spectra Phantom’s power gauntlet from Bakugan : New Vestroia. The piece needs to be built primarily in durable plastic so it’s light enough for everyday cosplay use yet sturdy enough to survive conventions and travel. I’m after a moderate level of surface detail—clean panel lines, the signature red-black colour split, and the raised accents that catch the light on screen—without going overboard on micro-etching or weathering. The star feature is the card slot. Please replicate the on-show mechanism: the card must slide in smoothly, lock in place, and release just as it does in the anime. If you look up clips of Spectra activating his gauntlet you’ll see exactly how the tray flicks out; that is the intera...

Need a 3D engineering-style animation (not cartoon / not marketing style). Animation should show a pressurized pipe with a visible crack and water leak. Show installation of a multi-layer composite wrap around the pipe. Section cut view must clearly show three layers: outer structural layer, hydrogel bead matrix, inner membrane. Water should migrate through the membrane and activate hydrogel beads. Beads must swell realistically (soft material deformation, not simple sphere scaling). Expansion should be constrained by outer layer and redirect pressure inward. Show leak gradually reducing as pressure seals the crack. Include micro-scale zoom showing bead hydration and gel-like expansion. Visual style must resemble SolidWorks / FEA / engineering simulation outputs. Clean white back...

I have a single reference image of a unique “bat sickle” and I need it turned into a print-ready 3D model with a high level of detail. The finished file should be suitable for 3D printing straight out of the slicer—clean topology, watertight geometry, and scaled to match the proportions shown in the picture. Deliverables • Final model in STL (OBJ as secondary) • Source file from your preferred software (Blender, ZBrush, Fusion 360, etc.) • Any separate pieces logically keyed for easy assembly if the form requires multipart printing Acceptance criteria • Fidelity: Clearly captures all visible surface features and contours from the image • Print readiness: No non-manifold edges, intersecting faces, or thin walls that won’t survive ...

I’d like a faithful, wearable recreation of Spectra Phantom’s power gauntlet from Bakugan : New Vestroia. The piece needs to be built primarily in durable plastic so it’s light enough for everyday cosplay use yet sturdy enough to survive conventions and travel. I’m after a moderate level of surface detail—clean panel lines, the signature red-black colour split, and the raised accents that catch the light on screen—without going overboard on micro-etching or weathering. The star feature is the card slot. Please replicate the on-show mechanism: the card must slide in smoothly, lock in place, and release just as it does in the anime. If you look up clips of Spectra activating his gauntlet you’ll see exactly how the tray flicks out; that is the intera...

The complete aircraft is already built in Creo 9 (individual part files plus the ASM001 top-level assembly). I now need a Sting support that mates with this model exactly as outlined in the Sting Balance Manual. Phase 1 – Sting support Start by creating the Sting support as a standalone Creo 9 part. Keep clear of the rear engine envelope; the wings are the most critical references for alignment. Medium geometric fidelity is fine—surface continuity and overall dimensions must match the manual, but there’s no need to model every fastener at this stage. Once the support file is ready, send it for a quick fit-check before moving on. Phase 2 – Connector concept Propose and model an interlocking connector that joins the aircraft to the Sting. I specifically want...

I need a specialized fishing flasher design for salmon in saltwater environments. Requirements: - Flasher should mimic a rolling action - Design file should be in .stl format for 3D printing Ideal Skills: - Experience in fishing tackle design - Proficiency in 3D modeling software

I'm looking for detailed mechanical drawings of various sports equipment parts, specifically for ball sports. This includes, but is not limited to, gears, shafts, and brackets used in soccer, basketball, and tennis equipment. Requirements: - Precision in technical drawings - Experience with mechanical parts - Familiarity with ball sports equipment Ideal Skills: - Proficiency in CAD software - Background in mechanical engineering - Attention to detail and accuracy Please provide samples of previous work. Someone in the Middle Tennessee area preferably.