Engenharia Civil Jobs

I am assembling a full cost proposal for a new power-distribution substation in Saudi Arabia and need a detailed, line-item quotation that covers every aspect of the civil scope. This includes––but is not limited to––foundation construction, structural-steel erection, complete site grading and excavation, concrete foundations for all equipment plinths, construction of the control/service building, broad site preparation, internal asphalt roads, and any other related civil works you normally allow for on similar utility projects. Your submission should clearly show: • Itemised quantities and unit rates (Excel preferred, PDF acceptable). • Lump-sum elements called out separately where a unit rate is impractical. • Brief notes on assumed constructio...

I need a detailed examination and solution for cracked steel suspension arms and welding on my caravan. Requirements: - Inspect suspension arms and welds. - Identify cause of cracks. - Recommend and possibly implement a solution. Ideal Skills and Experience: - Expertise in welding and metal integrity. - Experience with caravan or trailer suspension systems. - Strong problem-solving skills.

I need a crane added to the side wall of a concrete building at a zoo. The crane will primarily be used for animal care and transport, specifically for large mammals. Key Requirements: - Structural assessment of the concrete building - Design and installation of a crane on the side wall - Ensure safety and compliance with relevant regulations - Experience with heavy machinery and concrete structures is ideal Looking for skilled professionals in construction and structural engineering. Please provide relevant experience in your bids.

I’ll be overseas for roughly four weeks and need a capable structural engineer to keep my small Sydney‐based practice running smoothly during that time. You’ll become the first point of contact for our residential and light-commercial clients, carrying out all day-to-day engineering and admin duties until I return. Technical work • Conduct on-site foundation, framing and roof inspections throughout the Sydney metro area, typically one to three visits per day. • Prepare clear, signed engineering reports and any required remedial recommendations immediately after each visit. • Review or draft minor structural plans when builders or architects request last-minute changes. Business & client liaison • Monitor and answer all incoming emails so...

I want to stretch this design to 28’x34’ built on a pier and beam slab. Ceiling height is 9’ wall thickness is 2x4” and will use open web truss.

We are seeking an experienced Draftsperson to join our team, with a strong background in underground utilities and proven capability in 12d Model. Key Responsibilities: Prepare and deliver high-quality drawings and models for underground utility projects. Work closely with engineers, surveyors, and project managers to ensure accurate and timely drafting outputs. Interpret survey data, design information, and project requirements to produce clear and precise documentation. Maintain drawing standards, accuracy, and version control throughout the project lifecycle. Requirements: Minimum 3+ years’ experience as a Draftsperson, ideally in underground utilities, civil, or related infrastructure projects. High-level competence with 12d Model (essential – you must already be pr...

I am seeking a California-licensed structural engineer to review and provide stamped calculations for a minor residential alteration in Carnelian Bay, CA (Placer County). The Project: Scope: Installation of one (1) new 36" x 36" wood casement window in an existing loft wall. Framing: Exterior load-bearing wall (2x4 construction). Load Condition: The header supports roof load only (no floor loads). Code Cycle: 2025 California Residential Code (CRC) / 2025 CBC. The Issue: I have drafted the architectural and structural sheets (PDFs attached). Currently, my plans specify a (1) 4x6 Douglas Fir #2 header based on standard prescriptive tables. However, because the property is in a high snow load region (Lake Tahoe Basin), I expect this header size is insufficient and the prescrip...

I’m a builder-developer who routinely prepares material take-offs and other CAD-based documents, and right now I need a focused bit of help. I have the full set of lot dimensions for a new subdivision as well as four complete house plans. Your task is to review each lot and let me know which of the four plans will fit—and which will not—taking local building envelopes, required setbacks and practical construction clearances into account. All source material is ready to go: the plans and the lot layouts will arrive in native AutoCAD files, and I’d like your findings returned as a clear PDF that I can forward directly to my civil engineer and sales team. If you work natively in AutoCAD too, that will make coordination easy. Deliverables • A concise PDF report...

Scope of Work 1. Architectural Annotations & Detailing • Preparation of complete architectural floor plans. • Clear annotation of all spaces, including: • Room names • Utility areas • Circulation areas • Balcony areas • Marking of structural elements where required. • Indication of floor levels and reference dimensions. ⸻ 2. Door & Window Detailing • Marking and numbering of all doors and windows. • Providing: • Door sizes (width × height) • Window sizes (width × height) • Preparation of door and window schedule including: • Type • Dimensions • Location reference ⸻ 3. Room Dimensions • Providing clear internal room dimensions (length × width). • Mention...

I have a two-sided open residential plot measuring roughly 7.75–8 m wide and 15 m deep. I need complete architectural drawings that turn this footprint into a modern, efficient duplex. Ground-floor brief • Master bedroom with an attached bathroom • Kitchen and drawing room laid out for easy movement • Open parking large enough for one car or several two-wheelers First-floor brief • Three bedrooms, each with its own bathroom • Two balconies: one generous balcony linked to a bedroom and, ideally, to a shared lobby; a second balcony off another bedroom that may remain private or be shared, based on your space planning Front elevation A fresh, modern façade that complements the floor plan and makes the most of the plot’s two open sid...

I have a two-sided open residential plot measuring roughly 7.75–8 m wide and 15 m deep. I need complete architectural drawings that turn this footprint into a modern, efficient duplex. Ground-floor brief • Master bedroom with an attached bathroom • Kitchen and drawing room laid out for easy movement • Open parking large enough for one car or several two-wheelers First-floor brief • Three bedrooms, each with its own bathroom • Two balconies: one generous balcony linked to a bedroom and, ideally, to a shared lobby; a second balcony off another bedroom that may remain private or be shared, based on your space planning Front elevation A fresh, modern façade that complements the floor plan and makes the most of the plot’s two open sid...

I need a double-wide mobile home inserted onto flat, vacant land that has only utilities. The land is already equipped with necessary utilities, making it easier for the mobile home integration. Ideal Skills and Experience: - Experience in mobile home installation - Familiarity with utility connections - Ability to work on flat terrain

I am starting a new residential project and need a qualified civil engineer to produce a complete cost estimation plan. I have a format you just need to copy that. I've attached that. You just need to follow that and make some changes.

I need an engineered stamped concrete retaining wall, over 6 feet high, in Arizona. Ideal Skills and Experience: - Expertise in structural engineering for retaining walls. - Proficiency in working with concrete, especially stamped finishes. - Knowledge of Arizona's building codes and regulations. - Experience in landscape and site grading. Please provide examples of previous work, especially on high retaining walls.

I need assistance with an RSJ (Rolled Steel Joist) installation that was done without planning. I require both a visual inspection and a detailed structural assessment to ensure safety and compliance. This is necessary for obtaining Building Regulation Approval. Requirements: - Visual inspection of the RSJ installation - Detailed structural assessment - No existing documentation or plans are available Ideal Skills and Experience: - Experience with RSJ installations - Knowledge of building regulations and compliance - Structural engineering expertise - Ability to provide necessary certification

Por favor, Cadastre-se ou Faça Login para ver os detalhes.

I already have a full set of landscape construction drawings and the site is moving into the build phase. What I’m missing is a clear, item-by-item cost picture. The plans cover three scopes—hardscaping (patios, seat walls, small retaining walls), softscaping (planting beds, turf and soil prep) and a complete irrigation system—so the estimate needs to break each of those out separately. Here is what I’d like back: • An itemised material and labour take-off for hardscape, softscape and irrigation, referenced to the sheet numbers in the plans • Unit costs and totals in an editable spreadsheet (Excel or Google Sheets is fine) • Notes on any assumptions, exclusions or missing information you discover while measuring quantities If you normally use...

I have already purchased the architectural house plan from ; what I still need is the permit-ready documentation. Your assignment is to turn that stock plan into a complete, code-compliant package that my local building department will accept. Specifically, I require: • A site plan drafted in AutoCAD (.dwg) that positions the home accurately on my surveyed lot, respects all zoning-regulation setbacks, and notes grading, driveway, and utility connections. • A licensed engineer’s stamp on the structural sheets, confirming the design meets applicable loading and soil conditions for my jurisdiction. • Fully detailed plumbing and electrical layouts (also in AutoCAD) coordinated with the purchased floor plan, ready for rough-in and inspection. • A consolidat...

Request for Quotation (RFQ) – Structural Design & Engineering Consultancy Project: 40,000 Sq. Ft. Solar-Ready PEB Industrial Shed Scope: Structural Design, Proof Checking, and Technical Supervision 1. Project Parameters * Building Dimensions: 80text{m} times 50text{m} (Clear Span). * Eaves Height: 8.0 Meters. * Location: [Insert City/State] – Crucial for Wind Speed & Seismic Zone calculations. * Special Requirement: Provision for Roof-mounted Solar PV System (min. 20text{kg/m}^2 dead load). 2. Consultant’s Scope of Work The consultant will be responsible for the following deliverables: * Structural Analysis: Complete 3D modeling and stress analysis using or MBS. * Detailed Drawings: * General Arrangement (GA) Drawings. * Foundation & Pedestal Des...

PSM Welding is a specialist welding and mechanical contractor operating across water, recycled water, fuel lines, and civil infrastructure projects throughout NSW. We currently have an existing SWMS document. However, we require a complete consolidation and professional rebuild that: Incorporates all content from our original SWMS Integrates additional high-risk activities discussed in recent project requirements Aligns with NSW WHS legislation and current industry expectations Is structured, professional, and client-ready This document must be suitable for submission to Tier 1 and Tier 2 principal contractors (e.g. water and infrastructure projects). Scope of Work The freelancer will: Review our existing SWMS document (to be supplied). Rebuild and restructure it into a comprehensive, mode...

Good day I am looking for a structural plan for a small 1 story 12m x 6m gazebo. I have some sketches of a summer season enclosed gazebo I want to build in my backyard (measurements are in feet). I am looking to convert that sketch into a structural plan. My main concerns are about: 1. The monolithic concrete slab thickness in the center/edges, footing depth / width, ... 2. What thickness wood beams/pillars be needed for the roof? 3. I would like to have a double roof, while optimizing the living space under the roof by having exposed ceilings, and minimalizing the amount of rafters and hopefully not have any columns in the center of the room. In my area (near Montreal, Quebec, Canada) the building code requires: - 2.5kPa snow load and - to be able to withstand 120 kmh wind gusts. ...

I need a skilled structural engineer to draft set of drawings for a raised foundation intended for a residential steel building (future steel building) utilizing 10" core ICF. The foundation must be capable of supporting heavy equipment loads (skid steer, 5 ton truck ect. Key Requirements: - Raised foundation design - Heavy equipment load specifications - Detailed and accurate structural drawings Ideal Skills and Experience: - Expertise in residential steel building foundations - Proficiency in designing for heavy equipment loads - Strong drafting skills and attention to detail - Relevant engineering qualifications and experience

We are looking for an experienced structural engineer to carry out structural analysis and design verification for an open tensile canopy structure. Complete CAD drawings will be provided. The structure is open on all sides and designed for Indian site conditions. The scope includes studying the drawings, creating a 3D structural model in for the steel supporting frame and tensile components, applying dead load and wind load as per IS 875 (Part 1 and Part 3), including wind uplift and suction cases, preparing appropriate load combinations, and performing structural analysis and design checks as per IS 800. Support reactions are required for foundation design verification. The deliverables should include the STAAD file, wind load calculation sheet, load case and load combination summ...

We are seeking a licensed, structural engineer for forensic inspections in and around Harrisburg PA. This role involves inspection and assessment of existing structures usually experiencing a failure of building problem. The assignments are usually weekly however this is not a full time role. Candidate is free to choose what assignments they accept. Ideal skills and experience: - PA licensure in structural engineering - Expert witness experience preferred - Strong assessment and reporting skills -Knowledge of forensic engineering principles -Experience investigating post storm damage, construction defects and design flaws - Detail-oriented and thorough -Sole proprietor or owner of a small firm is preferred Please provide relevant credentials(must be a licensed PE in the state...

I'm seeking a qualified structural engineer to inspect a residential building. The inspection is needed for renovation purposes, with a focus on improving heat loss and overall structural integrity. Key Areas of Concern: - Roof and attic - Walls and insulation - Windows and doors Ideal Skills and Experience: - Licensed structural engineer - Experience with residential buildings - Knowledge in energy efficiency and heat loss mitigation - Detailed reporting skills

In Dombivali East, Pin 421201, Ayare Road, I have to remove pillars and install it little far. The reinstallation is for increasing the capacity. There are only 3 pillars (khamb) that need to remove first from their original place and affix little far from the original distance by say 1 hand far distance. It is for home, residential use. 1 day very short work that can be completed by 1 or 2 of your labours. You need to have similar experience in this. You must be from Dombivali East or very nearby areas, Thane district, Maharashtra state, Pin, 421201

I need a detailed scaffold design for a commercial building using steel. The scaffold will be used for construction and maintenance tasks. Key Requirements: - Comprehensive design plans - Ensure structural integrity and safety - Comply with local building codes and regulations - Include load-bearing calculations - Provide material specifications and quantities Ideal Skills and Experience: - Expertise in scaffold engineering and design - Proficiency in structural design software - Knowledge of safety standards and regulations - Experience with commercial construction projects Please include relevant samples of previous work and a timeline for completion.

I have a timed, open-book exam in Environmental Wastewater Treatment and need someone who can turn around complete, fully worked solutions in real time. The paper covers water treatment processes, waste management guidelines, and pollutant analysis techniques. Once the exam begins I’ll forward the question PDF; your task is to return clear, step-by-step answers—typed or neatly scanned—within the exam window. This is not just answer checking: I need the full derivations, supporting calculations, and any brief citations to standards or design equations so I can submit the work exactly as you provide it. Accuracy and speed are everything. When you apply, speak to your experience with environmental engineering coursework, wastewater plant design, or similar exam assistance....

Job Description: The Exterior Cladding Estimator will be responsible for preparing accurate material takeoffs andestimates for exterior cladding systems. This role requires strong attention to detail, the ability tointerpret architectural drawings, and a practical understanding of exterior building components. Responsibilities: ~ Estimating & Takeoffs Review architectural drawings for all project locations ~Identify all required exterior elements, including hidden areas, returns, soffits, andtransitions ~Prepare clear and accurate takeoffs showing total square footage (SF) of all requiredmaterials ~Ensure all scope items are fully captured and documented ~ Material Quantities & Optimization Create detailed material counts for cladding sheets and extrusion systems ~~Ensure...

Job Description: The Exterior Cladding Estimator will be responsible for preparing accurate material takeoffs andestimates for exterior cladding systems. This role requires strong attention to detail, the ability tointerpret architectural drawings, and a practical understanding of exterior building components. Responsibilities: ~ Estimating & Takeoffs Review architectural drawings for all project locations ~Identify all required exterior elements, including hidden areas, returns, soffits, andtransitions ~Prepare clear and accurate takeoffs showing total square footage (SF) of all requiredmaterials ~Ensure all scope items are fully captured and documented ~ Material Quantities & Optimization Create detailed material counts for cladding sheets and extrusion systems ~~Ensure...

I need a detailed layout plan of an existing school building. This plan will assist in renovation planning, ensure safety compliance, and optimize space usage. Requirements: - The layout should include all parts of the building, such as classrooms, cafeteria, gymnasium, and any other relevant areas. - The plan should be accurate and to scale. - Ideally, the layout will be delivered in a digital format (CAD, PDF, etc.) Ideal Skills & Experience: - Proficiency in architectural design and layout planning. - Experience with commercial buildings, especially educational institutions. - Knowledge of safety compliance and space optimization principles. - Strong attention to detail and accuracy.

I'm constructing an occupational therapy space and need a professional to assess the structure and provide design specifications. Key requirements: - Structural assessment of current construction - Design specifications to accommodate sensory integration equipment Ideal skills and experience: - Background in structural engineering or architecture - Experience with designing spaces for therapeutic use, particularly for occupational therapy - Familiarity with sensory integration equipment and spatial requirements Looking forward to your expertise!

I need a full structural package for a modular prefabricated residence that will be framed in steel from the foundation up. The scope covers three critical elements—foundation, wall framing, and roof system—and each must integrate smoothly with the factory-built modules so on-site assembly remains fast and predictable. My local authority follows the International Residential Code with typical wind, snow, and seismic provisions, so the design must satisfy those load requirements and arrive ready for permit submission. I will supply the architectural floor plans, site soil report, and any manufacturer shop details you require; you will return sealed calculations (where licensing allows), structural drawings in PDF plus editable CAD, and clear connection schedules for the module...

I already have a full set of landscape construction drawings and the site is moving into the build phase. What I’m missing is a clear, item-by-item cost picture. The plans cover three scopes—hardscaping (patios, seat walls, small retaining walls), softscaping (planting beds, turf and soil prep) and a complete irrigation system—so the estimate needs to break each of those out separately. Here is what I’d like back: • An itemised material and labour take-off for hardscape, softscape and irrigation, referenced to the sheet numbers in the plans • Unit costs and totals in an editable spreadsheet (Excel or Google Sheets is fine) • Notes on any assumptions, exclusions or missing information you discover while measuring quantities If you normally use...

I need a skilled structural engineer to create design and drawings for a residential building. Key Requirements: - Design and Drawings: Comprehensive structural designs and detailed drawings. - Collaboration: Work closely with me to understand requirements. - Codes and Regulations: Ensure compliance with local building codes. Ideal Skills and Experience: - Degree in Structural Engineering. - Proven experience in residential projects. - Strong knowledge of building codes. - Proficiency in design software (AutoCAD, Revit, etc.). - Excellent communication skills. Please provide a portfolio showcasing relevant work.

I need a qualified engineer to assess my pool's structural integrity. I have concerns about the foundation, as it seems to be shifting or settling. The surface has become bumpy, indicating possible underlying issues. It happended when we got alot of rain and suddenly got problems with pool. Insurance company had an engineer we dont agree with and would like second opinion The ideal candidate should have: - Experience with pool structural assessments - Background in civil or structural engineering - Ability to provide a detailed report on findings and recommend necessary repairs

I need plans for a flood-proof deck to place a container home on. The deck needs to be: - 7 feet deep concrete - 40 x 40 in size Ideal Skills & Experience: - Experience with structural engineering and flood-resistant designs - Proficiency in concrete work - Knowledge of deck construction

We are building a two-story structure with a cantilever beam. Drawings are already made as well as a Revit model but would like someone to clean it up (preferably, in English, and organized in the project browser and families section) and adding Simpson Strong-Tie Connectors. Attached is the Revit Model, set of drawings, and a list of connectors needed to be added to the Revit model based on the drawings. Simpson Strong-Tie website:

I’m working on earthworks in AutoCAD Civil 3D and I’m looking for an experienced colleague to help me fine-tune the terrain design. Main scope of work: - We will refine the digital terrain model together, including grading and cut/fill calculations. - We will prepare detailed cross-sections, longitudinal profiles, and volume reports. - We will optimize styles, templates, and workflows so the entire project runs smoothly. Working approach: I prefer collaborative work via Microsoft Teams (or similar tools), so we can quickly review designs, revise DWG files, and test adjustments immediately. Please include in your proposal: - A short overview of your Civil 3D experience, especially terrain design and surface work. - An example of a project where you handled similar volume cal...

I need a qualified engineer to inspect and sign off on residential windows that have been installed. The windows were already installed before photos were taken. The types of windows installed are: - Double-hung - Mullion - Slider door An ideal freelancer should have: - Relevant engineering qualifications - Experience with residential window installations - Ability to provide formal sign-off documentation

I need an engineering stamp for commercial building drawings, specifically for structural permit purposes. The primary need for this stamp is code compliance. Requirements: - Must be a licensed engineer. - Specialization in structural engineering. - Ability to verify and ensure code compliance. Ideal Skills and Experience: - Professional engineering license. - Experience with commercial building projects. - Knowledge of local building codes and regulations. Please provide your credentials and relevant experience. Thank you!

I have a light-industrial, pre-engineered metal building package ready for permit submission and now need a Florida-licensed Professional Engineer to give it a final code-compliance check and apply a digital seal. The drawings involved are limited to two areas—the entry driveway layout and the interior framing plans—and they are already fully drafted in PDF. I can email the files immediately. What I need from you • Flag or redline any revisions needed; I can update the sheets on my end if you prefer. • Provide the signed, dated drawings with your Florida PE digital seal (PDF with an embedded certificate is fine; one hard copy is a plus but not essential). Timing is critical—the building department is standing by—so I’m hoping for a turnaround...

I need detailed architectural drawings for a zoning variance in Fairfax County, Virginia. The project involves adding a single room (over 300 sq ft) off the dining room about 16'x22'. It will require a variance to County setback requirements. Packaging of the variance application will be part of the project as will drawings for the construction company. Key Requirements: - Accurate and compliant drawings for residential zoning variance application submission - Information for the construction company. - A layout plan must be prepared by a certified architect, landscape architect, engineer, or land surveyor that is licensed in the Commonwealth of Virginia Ideal Skills & Experience: - Expertise in residential zoning and construction drawings - Familiarity with Fairfa...

I need an inspection and sign-off on a newly constructed retaining wall. Requirements: - Verify against engineering plans - Ensure compliance with safety standards - Provide official approval Ideal Skills and Experience: - Civil engineering background - Experience with retaining wall inspections - Knowledge of local building codes I need this done ASAP, so prompt availability is crucial.

I need help removing bricks from a structural carport pier. I'm unsure about what to replace the bricks with; possibly some sort of bracing to the steel pole, going to the ground. Requirements: - Bracing for the beam? - Preserving load-bearing capacity is essential Ideal Skills & Experience: - Structural engineering knowledge - Experience with metal bracing - Recommendations for suitable solutions

I need a full tender package prepared for a commercial-scale building that is already in the construction phase. The industry is Construction, and because the project has moved beyond design and pre-construction, everything now has to align with current site activities, programme constraints and live contract conditions. You will take the drawings, specifications and cost plans I provide and turn them into a clear, professional Invitation to Tender that subcontractors can price with confidence. The document set must cover: • Invitation letter and instructions to bidders • Detailed scope of works and trade breakdowns • Bill of Quantities in Excel, ready for unit-rate input • Programme summary that locks in our critical milestones • Evaluation matrix showin...

I need a final inspection of a completed construction project, focusing on structural integrity. The inspection should specifically examine the wall Ideal skills and experience: - Background in structural engineering or construction - Attention to detail and thorough reporting

I already have a full ETABS model for an S + 5-storey building resting on piles with a combined raft. Total construction area is 150000 square feet. The structure is split into an eccentric A + B + C block and a standalone D block. What I now need is a quick yet rigorous clean-up that satisfies every IIT codal provision. Your core task is to re-tune the model parameters from R5 to R4, re-run the analysis, and push every change through to new GA drawings showing detailed reinforcements exactly as the updated ETABS values dictate. Once the numbers match code and the drawings look right, I’ll ask you to stamp everything with your digital signature and walk through the results during a short review meeting with the IIT vetting team. We will close the project immediately after IIT signs ...

Project Title Structural Analysis of a Building Using the Finite Element Method (FEM) Based on a 3D Model Developed in Revit Description Within the framework of an academic project, I aim to carry out a structural analysis of a building using the Finite Element Method (FEM) with the software Abaqus. I currently have a 3D model developed in Revit, derived from a three-dimensional survey, which serves as the geometric basis for the numerical simulations. The objective is to evaluate the structural behavior of the building in its initial state, as well as its response under seismic loading. Scope of Work The selected freelancer will be responsible for: Model Preparation for Abaqus Geometric simplification of the 3D Revit model Cleaning and adaptation of the model for FEM analysis Se...

I need a licensed engineer to review and stamp the design of a metal rescue tower. The tower is primarily for training purposes. Key requirements: - Focus on structural integrity - Provide necessary certifications and stamps Ideal skills and experience: - Expertise in metal structures - Background in safety and regulatory compliance - Licensed professional engineer (PE) Please include relevant experience in your bids.