Análise de Elementos Finitos Jobs

Finite Element Analysis (FEA) is a procedure used to identify and solve engineering problems that can have a wide range of complexities. It’s a type of engineering simulation that uses a set of mathematical equations to analyze and solve various engineering problems. A Finite Element Analysis Engineer is the person who will interpret the results and make recommendations for the best engineering solution. In order for FEA to be performed correctly and accurately, professional engineers must use special software written for FEA purposes.

FEA works by breaking down complex architecture or components into smaller sections to simulate how the entire structure or object will behave under real life circumstances or scenarios. Through this method, FEA engineers are able to provide their clients with valuable insights about potential failures or defects that can be identified and corrected before it’s too late and expensive.

Here’s some projects that our expert Finite Element Analysis Engineer made real:

  • Soothed residual stress issues in a laminated structure casting
  • Optimized support structure in geometry models
  • Analyzed output data from 3 point bending tests
  • Calculated forces while studying fire tests with ASTM E119
  • Performed various hard complex analysis involving ANSYS models
  • Evaluated and calculated stress levels, deflection points, and vibrations in structures and components.

The analysis of complex architecture can be extremely time consuming, however through FEA simulations, engineers are capable of quickly identifying weak points and then immediately take action to optimize it. Clients who have access to experienced Finite Element Analysis Engineer can save time, money and energy while carrying out their projects because they know exactly how their structure behaves before it’s even built. That’s why we invite you to use Freelancer.com for your project so you can hire an expert engineer in FEA that can provide you with the best engineering solution for your needs.

A partir das avaliações de 15,925, os clientes avaliam nosso Finite Element Analysis Engineers 4.83 de 5 estrelas.
Contratar Finite Element Analysis Engineers

Filtro

Minhas pesquisas recentes
Filtrar por:
Orçamento
para
para
para
Tipo
Habilidades
Idiomas
    Estado do Trabalho
    13 trabalhos encontrados, preços em USD

    I'm looking to hire a freelancer who has demonstrable expertise in 3D modelling, specifically using Comsol software. About the project: - I already have a simple 3D model done in AutoCAD. - I need this model re-created in Comsol. - It's imperative to note that I don't need it exported, but modeled from the beginning in Comsol. Your qualifications: - Proven experience with Comsol and 3D modelling. - Ability to communicate effectively and work within tight deadlines. Timeframe: - I need this project completed as soon as possible, so immediate availability is preferable. If you can meet these requirements, and are passionate about Comsol modelling, please place your bid. I'm eager to work with the right professional to bring this project to fruition.

    $113 (Avg Bid)
    $113 Média
    14 ofertas

    I am seeking an expert in ThermoFluids with strong proficiency in Heat transfer analysis and Finite element analysis (FEA). Ideal candidate should be able to: - Leverage their expertise to optimize heat transfer efficiency in a mechanical engineering context. - Conduct in-depth analysis to understand fluid flow behavior. - Use simulation techniques to analyze the thermal behavior of a system. Previous experience with mechanical engineering applications will be a plus. Your role will include providing actionable insights that will aid the effective redesign of our system for optimal performance. I look forward to a collaborative working experience.

    $106 (Avg Bid)
    $106 Média
    15 ofertas

    I'm seeking assistance with my master's thesis, specifically focused on material characterization and modeling simulations in the realm of electro-plastic behavior and constitutive modeling of super alloys. Key Requirements: - Solid understanding of Mechanical/Material Engineering and Automation - Detailed knowledge of electro-plastic behavior and constitutive modeling - Quick turnaround within 15-20 days Ideal Experience: - Experience in academic or professional research in the mentioned areas - Proven track record of writing technical and scholarly material - Previous work with similar modeling and simulations Please note, some research and preliminary work has already been conducted in this space, and will be available for reference. Reach out if you are comfortable wit...

    $533 (Avg Bid)
    $533 Média
    26 ofertas
    FEM MATLAB Solver Development 4 dias left
    VERIFICADO

    The task at hand revolves primarily around the Finite Element Method (FEM) and its application to solve boundary value problems. This should be done on MATLAB. I need help with a variety of key components which include: - Mesh generation: Knowledgeable in creating and managing computational grids is essential. - Analysis and solving: An expert who can implement numerical methods to solve boundary value problems. - Interpolation and L2 Projection: Someone who can effectively use interpolation techniques would be preferred, along with understanding L2 Projection. While it's not explicit which specific boundary value problem this project aims to solve, a strong foundation in FEM and its application in various domains will be required and appreciated. Ideally, you have experience usi...

    $134 (Avg Bid)
    $134 Média
    15 ofertas

    I'm looking for someone who can create a Trnsys model dedicated to energy analysis of a Heat Pump system. The goal is to analyze the heating capacity of the system. Key Skills Required: 1. Deep understanding of Trnsys modelling and energy systems 2. Extensive experience in Heat Pump systems 3. Ability to translate heating capacity parameters into Trnsys models I hope to work with someone who can quickly and accurately create this model. Expertise in the energy sector and past work with similar projects are appreciated. Let’s harness our energy for this project!

    $14 / hr (Avg Bid)
    $14 / hr Média
    15 ofertas

    I am looking for an expert in crane structural design to help with a project I have. The task involves analysis and design of a crane structure for heavy load capacity (10+ tons). Only for a sales project phase, that means a pre-dimensioning. Loads, location and other data are defined, the calculation has to be done. More specifically, I need assistance with: - Load capacity calculations - Stability analysis - Structural component design Know-How about norms: - EN 14439:2009 - EN 13001-2:2021 If you have a background in civil or mechanical engineering, especially with experience in cranes design, I would love to hear from you. Deep understanding of structural dynamics in heavy-equipment design is a major plus.

    $34 / hr (Avg Bid)
    $34 / hr Média
    26 ofertas

    Note: I want to know how well the concrete holds up in each of the 9 tests. I want indicators such as a graph, etc. I also want a thermal analysis for each test

    $97 (Avg Bid)
    $97 Média
    6 ofertas

    I require a professional skilled in finite element analysis for a plastic water storage tank project. The main task is to increase the top opening diameter as much as possible without inducing any stress into the structure. Key tasks are outlined below: - Increasing the number of grooves on top from 4 to 8. This is to enhance the structural stability of the tank. - Determining the maximum top opening diameter based on tank size. The expected size range lies anywhere between 20 to 30 inches or more. This task is suitable across all tank sizes - small, medium, and large. The ideal freelancer for this project should hold a strong knowledge of finite element analysis and hands-on experience in structural stability projects related to storage tanks. A background in industrial engineering ...

    $302 (Avg Bid)
    $302 Média
    20 ofertas

    As a project owner, I am seeking a professional well-versed in mechanical engineering. The focus will be on two distinct areas: 1) heat transfer, and 2) control. I am looking for someone with a robust understanding of data analysis, simulation, and design. Your primary tasks will not include experimental testing. Instead, the emphasis is on modeling, particularly in the field of heat transfer. Specific expertise in the areas of conduction, convection, or radiation is not strictly necessary. To ensure a successful collaboration, please include the following in your application: - Examples of past work related to mechanical engineering, heat transfer, and control. - Expression of your expertise, particularly within the realm of data analysis, simulation, and modelling in mechanical enginee...

    $480 (Avg Bid)
    $480 Média
    17 ofertas

    I'm searching for an expert with a minimum of 10 years in the oil and gas industry specifically skilled in performing multiphase flow analysis. The key tasks involve: - Conducting fluid flow analysis, particularly multiphase flow analysis. Required expertise: - Extensive experience in Computational Fluid Dynamics (CFD) - Proficiency in ANSYS CFD software Please only bid if you possess the qualifications and are comfortable with the responsibilities. I look forward to working with a dedicated professional who can deliver accurate and efficient results.

    $4000 (Avg Bid)
    $4000 Média
    8 ofertas

    As an organization, we're urgently looking for a Simulation Consultant who specializes in Structures and Load Analysis. Key Deliverables: - Apply structural and load analysis techniques to various projects - Utilize simulation software such as ANSYS, SolidWorks Simulation, and AutoCAD effectively in modeling Desired Skills & Experience: - Proficient in ANSYS, SolidWorks Simulation, and AutoCAD - Solid background in structural and load analysis - Proven experience as a Simulation Consultant We need this project completed as soon as possible. We look forward to collaborating with a dedicated Simulation Consultant who can deliver quality work within the tight timeframe.

    $42 (Avg Bid)
    $42 Média
    21 ofertas

    I require a stress analyst to perform a thrust load calculation on a slurry piping. Key areas of focus will include: Assistance is required specifically with pipeline design elements of the slurry piping. The ideal freelancer for this project will have strong experience in stress analysis, with specific knowledge of slurry pipelines. Understanding of various materials and their responses to stress loads will also be beneficial.

    $108 (Avg Bid)
    $108 Média
    5 ofertas

    Artigos Recomendados Só para Você

    Get your product into the hands of test users and you'll walk away with valuable insights that could make the difference between success and failure.
    7 MIN READ
    A guide to hiring and working with freelance Photo Anywhere Expert
    15 MIN READ
    Learn how to hire and collaborate with a freelance Typeform Specialist to create impactful forms for your business.
    15 MIN READ