Engenharia Estrutural Jobs

I have a continuous flow of steel-framed industrial projects—pipe racks, equipment platforms, conveyors, and similar work—and I’m looking for a Tekla Structures specialist who can stay on board long term. Every assignment will arrive with my mark-ups, architectural/engineering references, and a target hand-off date. Your role is to turn that information into a clean, clash-free Tekla model that my engineers can review and my fabricator can trust. Accuracy in bolt and weld definition, disciplined numbering, and respect for country-specific steel codes are critical. I’ll share naming conventions and templates up front so we stay consistent from job to job. Typical packages range from a few tonnes to full plant additions, and if the first project runs smoothly I can k...

I’m moving forward with a residential remodel and need a Missouri licensed professional. I need structural engineer or architect to provided calculations on a stairwell relocation in St Louis County MO. Stairwell is currently on one side of the main beam, and we are moving to the other side of the beam. Your role will start with reviewing the current DWG drawings, confirming loads, and producing all necessary structural loads on a stairwell relocation. I can easily make I can make all necessary changes to the DWG drawings per your request. The note from St louis County Building Department states: New Stair Opening Building Created by: Laura on 4/14/2026, 1:32:34 PM Reference: Description: Provide structural calculation (signed and sealed by Missouri registered design profes...

I’m taking over a vacant strip-mall bay in North Carolina and turning it into a restaurant. To submit for building and health permits I need a NC-licensed architect who can transform my rough sketch into a fully coordinated, code-compliant construction set. The shell is already built; what’s missing is a clear, permit-ready package that shows the dining room, kitchen and storage/warehouse areas, integrates life-safety requirements and ties in all MEP work. Here’s what I’m counting on you to deliver: • Signed and sealed architectural plans, elevations, sections and schedules suitable for county review • Refined floor plan based on my sketch, optimised for back-of-house flow and front-of-house guest experience • Life-safety, accessibility and ...

My upcoming build is still at the concept stage, so I need a licensed structural engineer to step in early, develop the structural scheme, and carry it through to a permit-ready package. At this point I have only rough sketches; no finished architectural set is in place yet. Experience with analysis software such as ETABS, SAP2000, or STAAD will help streamline the process, but the critical factor is clear communication and timely delivery. If this scope fits your expertise, let me know your projected turnaround and any information you need up front so we can get started right away. Thank you

I'm seeking a skilled Architect/Structural Engineer to remodel my kitchen, bathroom, living room, and basement. The focus is on redesigning the open space, not on interior design, with structure taken into consideration. I am a licensed General Contractor, and this home does not have original blueprints, as I am the new owner. I need permittable plans with structural modifications and ideas for space usage to maximize the home once walls have been removed. The specific changes I want to make are: - Flooring: Possible new support beam for 1st floor if needed for load - Walls/Partitions: Reconfiguring walls/partitions to improve the layout. on the main floor and in the basement to create a better master bedroom/Closet/Bath with a vault or tray, if possible in the master. Removing the ...

I need a structural engineer to validate and provide documentation for a city permit. This is to confirm that an office wall can support a ventilation hood I am installing. Requirements: - Validate structural integrity of wall - Provide engineer's stamped letter for city permit - Review existing blueprints and measurements Ideal skills and experience: - Licensed structural engineer - Experience with similar permit documentation - Ability to assess provided floorplans and measurements

I'm purchasing a house and need a thorough inspection of the roof structure and a five-year-old extension. Roof Structure Inspection: - Assess structural integrity - Check compliance with building codes - Identify potential leaks or water damage Extension Evaluation: - Focus on roof integration with existing structure - Examine cracks in walls or ceilings Ideal Skills and Experience: - Licensed structural engineer or qualified inspector - Experience with residential roofs and extensions - Attention to detail and comprehensive reporting

I need a Florida registered engineer to perform calculations for a commercial metal building. The calculations should comply with the Florida Building Code. Requirements: - Structural frame calculations - Roofing system calculations - Wall panels calculations Ideal Skills and Experience: - Florida PE license - Experience with commercial metal buildings - In-depth knowledge of Florida Building Code

Only replies with NC PE license number will be considered. We are looking for a North Carolina licensed Professional Engineer (PE) for long-term collaboration. You do not need to create the drawings from scratch — we deliver high-quality, detailed plans. You only review and stamp. If interested, please reply with: - Your NC PE license number - Brief experience with residential stamping in NC - Your typical turnaround time and rate

I need a licensed engineer to provide stamped plans for my residential remodel. The project involves adding engineered wood beams and floor joists to raise a floor, with the main goal of increasing ceiling height. Requirements: - Stamped engineering plans - Experience with residential structural modifications - Proficiency in engineered wood systems (e.g., LVL) Ideal Skills: - Structural engineering license - Experience with residential projects - Knowledge of building codes and regulations

We are an energy solutions company seeking an experienced solar PV engineer or consultant to conduct a preliminary technical feasibility study for the installation of solar PV panels on two semi-submersible accommodation vessels currently operating offshore Brazil. Scope of Work: The deliverable is a feasibility study report covering the following: System sizing based on available deck area (~324 sqm per vessel) and local solar irradiance conditions Assessment of key technical challenges specific to the offshore marine environment (dynamic vessel heading, motion and vibration loading, saltwater corrosion, shading analysis) Indicative equipment specifications (marine-grade PV panels, inverters, mounting systems) Electrical integration approach with the vessel's existing onboard power...

All drawings, specifications, and material schedules for a new primary school are ready; what I now need is a clean, fully-coded bill of quantities produced directly in CostX. The scope is limited to the roof package only—carpentry items as well as all structural-steel members and fixings. You will take the documentation I supply (PDF drawings, schedules, and my preliminary measurement notes) and create a CostX project file that: • Breaks down every roof element into measured, logically grouped work sections. • Uses CostX’s dimension groups, rate libraries, and custom codes so the file is ready for live pricing and future revisions. • Aligns with standard building-construction estimating conventions and the school’s specification language. Needs to al...

I have a full set of residential structural drawings that now need a professional check before we submit them to the city. Your brief is straightforward: • Start with the drawings I’ll send (PDF + DWG) and create a fresh set of structural calculations. There are no prior calcs to tweak, so everything—gravity, lateral, foundation, beam, column, and connection checks—must be generated from scratch. • While the main priority is code compliance, if you spot opportunities to safely down-size any over-designed beams or members, please incorporate the revisions and note them in the schedule. Savings are welcome as long as they meet the governing residential codes. • Deliverables: a complete, signed & sealed calculation package ready for permit submittal, pl...

I’m preparing to move my residential building project from concept to reality and need an experienced structural engineer to take charge of the full design and analysis during this planning phase. Your role will be to translate the architectural intent into a safe, code-compliant structural system, delivering all calculations and documentation required for permitting and construction. Key deliverables I will be looking for: • Complete structural drawings (foundation, framing, roof, connections) in CAD/PDF • Load calculations and analysis reports that satisfy local building codes • A concise design brief outlining chosen materials, assumptions, and design criteria • One revision cycle after I review the initial package with my architect I’m happy to s...

I need an experienced transportation-focused civil engineer who can determine if a township road in front of my home in Malvern, PA is stable over a culvert that conveys a creek onto my property. This engagement is urgent; I need you to inspect as soon as possible. If you have a record of successful road projects where you served as site supervisor or resident engineer, let’s talk.

We are looking to purchase an existing, completed substation design package for a 345 kV / 34.5 kV substation with a 1½ breaker scheme on the 345 kV side. We are NOT looking to hire a designer to create a new design from scratch. We want to acquire rights to a previously completed project that we can use as a reference baseline for our own work. What we need: Complete design documentation for a 345 kV / 34.5 kV substation built or designed for the US market (ANSI/IEEE standards, NESC compliance) 345 kV side: 1½ breaker (breaker-and-a-half) scheme 34.5 kV side: any standard configuration (single bus, double bus, or ring bus acceptable) Design must comply with applicable US standards: IEEE C37, IEEE 1584, IEEE 80 (grounding), NESC, NFPA 70E, and relevant utility/ISO requirement...

I need construction drawings for a 6x16 lean-to attached to my pole barn, using the same roof plane. Main concern is how to tie new roof into existing roof. Notched 2x6 rafters? Will open up existing roof to tie in new lean-to Key Requirements: - Structure should be sturdy and weather-resistant (Michigan snow load) - Seamless attachment to existing roof -4/12 pitch -Wall height 12’ Ideal Skills & Experience: - Experience with carpentry and roofing - Knowledge of building codes and regulations - Previous work on similar projects

I need a professional to assess a bowing wall in my basement. The wall has cracks and the foundation is settling. I can provide photos but no formal reports. Requirements: - Thorough structural assessment experience - Expertise in diagnosing wall cracks and foundation issues - Ability to interpret and analyze site photos Ideal Skills and Experience: - Background in structural engineering or a related field - Experience with residential structural assessments - Strong attention to detail and analytical skills. Repair recommendations.

What the project is A comparative structural impact study of three lightweight occupant-cell concepts for a small side by side 2 seater urban vehicle: 1. Tubular frame (aluminium) 2. Monocoque frame (preferably carbon or maybe polyurethane like foam filled stuff) 3. Hybrid redesign based on the weaknesses found in 1 and 2 The occupants are side-by-side in every case. The impact speed is 28 mph (45 km/h) in every case. The impact conditions are: • frontal impact • side impact The purpose is to find which concept gives the best occupant protection for a lightweight design.

I need an experienced designer to improve the functionality of our dock boxes. The key areas of improvement are: - Structural integrity: Current design has issues affecting durability. - Enhanced durability: Materials and design should withstand harsh conditions. - Easier accessibility: Redesign for user-friendly access Ideal Skills and Experience: - Expertise in product design - Strong knowledge of durable materials - Experience with ergonomic and accessible design Please share your portfolio and relevant experience.

I have an industrial building project covering roughly 20,000 sq ft and I now need a complete, accurate bar bending schedule (BBS). All reinforcement details must be transferred into my existing Excel template—the file will be shared as soon as we start. I simply need you to extract the bar marks, diameters, lengths, shapes and bend dimensions from the structural drawings and populate every relevant sheet so the cutting, bending and placement teams can work straight from it. Please keep everything inside the template structure; formulas and layout are already set up, so no redesign is necessary. The finished workbook should include: • A summary tab with total tonnage auto-calculated from your inputs • Separate sheets for footing, column, beam, slab and any miscellaneous...

I have a 12.5 ft × 60 ft footprint and want a full set of structure-focused drawings for a two-story house. The emphasis is on accuracy and code compliance rather than architectural styling; in other words, I need clean, build-ready structure drawings. Here’s what I expect to receive: • Dimensioned floor plans for both levels with beam, column, and wall locations • Foundation layout, footing details, and rebar schedule • Roof/framing plan with connection specifics • At least one longitudinal and one transverse section that call out all member sizes • General notes covering loads, materials, and any code references Please deliver everything in both DWG and PDF so I can submit to the local authority and hand straight to the builder. The envelope...

I need a Missouri-licensed architect to prepare full construction drawings for a 1,200 sq ft extension that will convert part of my commercial building into a dedicated garage. The space must comfortably accommodate multiple vehicles; beyond that I’m open to fresh design ideas because the existing structure doesn’t dictate a particular style. Scope • Site visit coordination (virtual or in person) to verify dimensions and local conditions • Schematic layouts showing optimal vehicle flow and clearances • Code-compliant architectural, structural, and basic MEP sheets suitable for permitting in Missouri • Professional seal for the State of Missouri on the final set Acceptance Drawings should meet current Missouri building codes and be ready for cit...

I need two experienced coastal engineers to join my team on an upcoming flood-prevention project in the Caribbean. The work will be carried out on-site, so you must be ready and able to travel for the duration of the assignment. Your background should demonstrate solid, hands-on experience in shoreline protection and marine construction. You will be asked to inspect the existing coastline, design and refine practical defence measures, and remain on location to supervise implementation. All permits and stakeholder arrangements are already in place, so you can focus purely on the technical aspects without the extra layer of local-authority liaison. Key deliverables • A concise site-assessment report highlighting existing vulnerabilities and recommended shoreline-protection techniques....

I am transforming a blank commercial space into a modern-style restaurant and need both the architectural vision and the structural expertise to make it happen safely and efficiently. The dining area, kitchen, and an outdoor seating zone all require detailed evaluation; every wall, column, and canopy has to be verified or redesigned so that style never compromises safety. Sustainability is a must. Wherever possible I’d like recommendations for recycled or rapidly renewable materials, energy-efficient systems, and construction methods that lower the project’s overall footprint without inflating costs. Here is what I will be looking for in the final package: • Architectural concept and code-compliant floor plans that reflect a clean, modern aesthetic. • Full struct...

I want to work one-on-one with an experienced residential structural engineer in Victoria who can guide me through the practical side of townhouse design. My goal is to strengthen my command of overall structural integrity and compliance with local regulations, so every session will revolve around real projects currently on my desk. We will meet by video call once or twice each week, after standard business hours, for 60–120 minutes. During each call I will share the current footing layout, slab plan, beam schedule or retaining-wall detail and ask you to walk me through the calculations, code clauses and reasoning that shape your decisions. I learn fastest when you can sketch on screen, reference the NCC and relevant Australian Standards, and, if helpful, demonstrate software such a...

I have a civil-engineering task that calls for precise calculations, thoughtful design input, and a clear written explanation of the technical choices made. Graphic outputs that illustrate the solution path or final design will also be part of the hand-off. Once we agree to move forward I will share the full brief, but in essence the work centres on applying core civil-engineering principles to a practical problem. Accuracy and clarity are critical; I would like every assumption stated, every step shown, and the final results organised so a non-specialist can follow the reasoning. To be considered, please send a detailed project proposal that outlines: • the specific methods or software you plan to use (AutoCAD, Revit, STAAD, spreadsheets—whatever suits your workflow) &bul...

We are currently shipping our products to Amazon in multipacks and they in turn ship as is to their customers. We would like to look at a few potential insert prototypes which might help to distribute the force of a drop and mitigate some of the damage we have seen given our unique packaging Here’s how I see the project flowing: • Project Kickoff to discuss wants / needs * Structural design: translate my rough sketches into a flat dieline *Discussion with packaging manufacturer • Material specification: recommend the ideal paperboard weight, coatings, and any specialty finishes that balance durability with an upscale look. • Production documentation: final dieline, 3D mock-ups (OBJ or PDF-3D), bill of materials, and press-ready specs for the converter. Timing...

The documents are attached We need to quote for irrigation workd therefore quantities to be calculated accurately. For long term relation we need immediate response with competitive price.

I need experienced professional to certify my roof for a hybrid solar panel system on the sloped roof of my residential house. Key Requirements: - Proper certifications Ideal Skills and Experience: - Engineer licensed in NV to certify my roof - I'll do the work myself, they just need to certify that it can happen

I’m building a finite-element model in Abaqus to replicate a push-out test where steel beams are connected to CLT slabs. The sole objective is to capture and understand the deformation behaviours that develop throughout the load history, rather than ultimate strength or specific failure modes. Here’s what I need from you: • An accurately meshed, non-linear Abaqus model that represents the steel beam-to-CLT connection used in push-out testing (material orthotropy for CLT, contact definitions, appropriate boundary conditions, and loading protocol). • Post-processing that isolates global and local deformations and presents them as clear, publication-ready graphs and charts (force–slip curves, displacement contours, etc.). • All input files, output da...

I need an expert to check the requirements for underpinning a stable concrete retaining wall that is 3 to 6 feet high. Key requirements: - Assess the need for underpinning - Evaluate stability and safety - Recommend materials and techniques Ideal skills and experience: - Civil engineering background - Experience with retaining walls I would like a structural engineers reports on a retaining wall. - Knowledge of underpinning methods

I'm looking for detailed plans to create a concrete porch addition. The primary purpose of this addition is to serve as a personal relaxation space. Requirements: - Design should be suitable for relaxation - Plans should be structurally sound and detailed enough for construction Ideal skills and experience: - Experience in porch and patio design - Knowledge of local building codes and regulations - Proficiency in creating detailed, accurate construction plans Please provide examples of similar work done.

I am seeking experienced Structural, Civil, and MEP Engineers to provide stamping services for multiple residential and commercial projects. Key Requirements: - Expertise in Structural, Civil, and MEP engineering - Ability to provide necessary stamps for engineering drawings - Experience with residential and commercial projects - Knowledge of local building codes and regulations Ideal Skills and Experience: - Professional engineering licenses in relevant disciplines - Proven track record in handling multiple projects - Strong attention to detail and accuracy - Excellent communication skills for coordinating with our team Please provide relevant credentials and experience in your bids.

I’m upgrading an existing building and want a sleek, modern mono-stringer staircase fabricated in metal with a durable powder-coated finish. The structure must fit seamlessly into the current floor plan, respect head-height clearances, and meet local code for strength and safety. I can supply PDF/DWG files of the present layout along with exact floor-to-floor dimensions once we start. What I need from you are dimensioned shop drawings and a 3D model I can hand straight to my fabricator, plus basic structural notes that confirm tread, stringer and connection sizing for the two story staircase. AutoCAD, Revit or SolidWorks files are ideal; hand sketches alone won’t be enough. Deliverables • 3D model illustrating stringer, treads, landings and railing connections •...

I’m preparing a complete, new metal piping network for an industrial facility and need an experienced pipe fitter who can take the project from layout through final pressure testing. All pipe runs are brand-new installations—no existing lines to modify—so accurate measurement, cutting, fitting, welding, and secure anchoring are crucial. You’ll be working exclusively with metal pipe, tying the system into our equipment bays and utility headers while maintaining clear access for future maintenance. I will supply the plans, specs, and on-site support for lifting or hot-work permits; you bring the tools, materials know-how, and the skill to deliver a clean, code-compliant install. Deliverables: • Fully installed metal pipe system built to the provided drawings ...

I regularly receive FrameCAD .dwg files for properties we are building and need fast, accurate pricing so I can turn quotes around to my own clients. Each batch is small—typically one to five drawings—but the files carry complex annotations and the drafting style is never identical from job to job. Here’s how the workflow will look: I’ll email you the drawings together with my current $/lb rate. You review every line, calculate the steel weight, and send back a single figure for the full job plus a short breakdown that shows how you arrived at it. Turnaround must be no longer than 24 hours each time, as I’m often working against tight bid deadlines. Your deliverable every time: • Total calculated weight for all drawings in the batch • Final...

I fabricate porta cabins and now need an optimised design for a new line of office units built from light-gauge steel sections (LGSS). The target footprint sits between 100 sq ft and 300 sq ft and must comfortably accommodate the following essentials: • Workstations • Meeting room • Reception area What I’m looking for A designer or structural consultant who lives and breathes lightweight construction and can translate these requirements into a complete, build-ready package. You should be comfortable working in CAD/BIM (AutoCAD, Revit or similar) and running structural checks in STAAD, Tekla, SAP2000 or equivalent software to make sure the LGSS frame meets national codes for wind load, transport stresses and on-site handling. Deliverables I need to receive ...

I am already in the construction phase of an industrial facility referred to internally as the “MAB.” To keep the build on schedule and fully compliant, I need a professional who can step in right away and guide the remaining works through to completion. Your role will revolve around three core areas: • Site-level oversight to verify that current works match the approved drawings and local industrial codes. • Coordination with the existing contractors and trades, resolving day-to-day clashes before they escalate. • Clear, concise reporting—weekly progress notes, updated timelines, and a punch-list of any corrective actions. If you have a solid background in industrial construction management or site engineering and can work with typical tools such as ...

Hi, I’m currently working on a residential addition to my home in Wake County, NC (county jurisdiction). I’m acting as the homeowner/GC and have a full set of plans that were drawn up and stamped by a PE. I just completed the framing inspection, and there are several corrections/items to be addressed. I reached out to the original engineer, but he’s going on vacation and said it may take a couple of weeks after he returns to review. I’m trying to move this forward ASAP so I can proceed with insulation and drywall and stay on schedule before summer. I will need a stamped letter or engineer’s response to satisfy the inspector. I have the full plans, photos, and a written summary of the items ready to share—can you assist, and what would your turnaround ti...

I’m building a new adventure park and need a structural engineer who can take my ropes-course and zip-line concepts all the way from safety calculations to permit-ready drawings. Rough sketches and partial plans already exist for several sections, while other elements still need to be designed from the ground up, so you’ll be switching seamlessly between review/optimisation work and clean-sheet creation. All primary members, platforms, anchor points and connection details will be fabricated in composite materials. If you have previously specified pultruded or moulded FRP profiles, worked with hybrid composite-steel interfaces, or certified composite load paths for dynamic attractions, that’s exactly the sort of expertise I’m after. Your calculations must satisfy cu...

I'm seeking a skilled carpenter or furniture designer to create a foldable wall table primarily for work or study use. The table should be made of pine wood. Key Requirements: - The table must be sturdy and durable, yet easy to fold and unfold. - Space-efficient design is essential, as it will be mounted on the wall. Ideal Skills and Experience: - Expertise in working with pine wood and other types of lumber. - Experience in designing and building foldable or modular furniture. - Attention to detail and craftsmanship quality. - Ability to provide a design mockup and ensure structural integrity. Please include examples of similar work in your portfolio. Thickness 2.5 cm Width 135cm Length 50cm Please provide cable orgnizers on the side of the table. USB- Type C charging port. K...

I have a commercial project that is already past concept and schematic stages, so what I’m missing now is a fully coordinated detailed-design drawing package created in either Revit or AutoCAD. Here’s what I need from you: • Architectural plans, sections and elevations showing dimensions, levels, finishes, door / window tags and schedules • Structural details—including foundations, framing, reinforcements and any typical/critical connections—fully referenced back to the plans • Sheets compiled and ready for permit submission in both native file format (RVT or DWG) and PDF Acceptance criteria: • All views are to scale, cleanly annotated and on a consistent title-block template • Layers / families are organised logically for easy hand-...

I’m looking for a Chartered Structural or Civil Engineer registered in Australia to give professional, NCC-focused advice on a project that falls under Classes 2, 3 and 9. Right now I don’t need full structural drawings or inspections—what I need is targeted consultation that ensures every detail of our concept design will satisfy the current National Construction Code, relevant Australian Standards and any state-specific amendments. Here’s what I expect from our collaboration: • A series of remote or in-person consultation sessions (we can agree on the format) where you review the design intent and flag any compliance risks early. • A concise written summary after each session outlining required code provisions, reference clauses and recommended acti...

I need a detailed Bill of Quantities for a new residential construction project. The drawings, specifications, and any clarifying notes will be shared as soon as we start, and I’d like you to turn them into a clear, item-by-item BOQ that can go straight to tender. Use the standard method of measurement you are most comfortable with (POMI, SMM7, or CESMM are all acceptable) and structure the document so that every element of work is easy for contractors to price and for me to track during execution. Accuracy in take-offs is critical; please double-check dimensions and flag any missing information before you proceed. Deliverables: • An editable Excel (or compatible) BOQ, grouped logically by trade or work section. • A brief summary sheet showing subtotal per section and t...

I manage a continuous mix of residential and commercial jobs throughout New York and need a Professional Engineer who can step in as my on-call authority for code compliance, plan revisions, and, most critically, official stamping. Most submittals arrive essentially complete, yet municipalities still require a NY-licensed seal or the occasional tweak to satisfy an inspector. Your role is therefore heavier on review, minor revisions, and quick turnaround endorsements than on ground-up design, though the ability to verify structural calculations and spot hidden load-path issues is essential. Typical packages you will receive include: • Blueprints that need your PE stamp • Structural calculation sets for verification and sealing • Site plans requiring last-minute edits an...

I need a structural engineer to assess the integrity of an egress stairwell. Key requirements: - Evaluate lower portion of stairwell (after landing to bottom floor) - Existing top half is fine Materials: - Steel stringers - Wood treads -Concrete foundation Ideal Skills and Experience: - Licensed structural engineer - Experience with steel and wood structures - Attention to detail - Knowledge of safety and building codes Please provide a professional assessment letter upon completion.

I need a structural engineer to evaluate the foundation of a residential building. This is required by my mortgage company. The inspection should focus on: - Settlement or sinking issues Ideal skills and experience: - Licensed structural engineer - Experience with residential foundation inspections - Ability to provide detailed reports for mortgage requirements

I need a licensed engineer to stamp our structural designs for a residential building project. Key Requirements: - Review and approve engineering designs - Provide official stamp and signature - Ensure compliance with local building codes Ideal Skills and Experience: - Licensed structural engineer - Experience with residential projects - Knowledge of local regulations and codes Please provide your credentials and relevant experience.

My project is at the planning-and-design stage and I need a qualified structural engineer to take the lead on all calculations, drawings, and code compliance. The scope includes analyzing loads, specifying appropriate materials, and producing fully detailed structural plans ready for permit submission. You will translate my architectural concept into a safe, build-ready structure, coordinating with any other disciplines as questions arise. Please indicate the software you prefer to work in (e.g., AutoCAD, Revit, SAP2000, ETABS) and confirm that your deliverables will include stamped drawings (PDF and DWG) plus a concise calculation report. If you have recent experience designing buildings or infrastructure during the early design phase and can start promptly, I’d like to review...