
Closed
Posted
Paid on delivery
I am looking for an experienced power electronics engineer or engineering team to design a residential-scale hybrid solar inverter for commercial production. The project involves developing a single-phase, 230 V AC, 50 Hz pure sine-wave hybrid inverter that integrates rooftop solar panels, a lithium battery bank and the utility grid. The design should prioritise high efficiency, reliability, safety and ease of manufacturing. I prefer an engineer with previous experience designing working solar inverters, grid-connected converters, MPPT controllers and bidirectional battery systems. An existing, validated reference design that can be licensed or transferred is preferred. 1. Target Specifications Rated power: 1–5 kW continuous AC output: 230 V RMS, single phase, 50 Hz Output waveform: Pure sine wave Battery systems: 12 V, 24 V and upto 96 V variants, subject to practical power limitations Battery chemistry: LiFePO4 and other supported lithium chemistries Solar input: Photovoltaic array with MPPT Grid operation: Grid synchronisation and controlled power export Operating modes: Solar self-consumption, battery charging/discharging, grid import/export and backup operation Monitoring: Wi-Fi and/or RS-485, preferably Modbus RTU Control: DSP or microcontroller-based digital control Design priorities: High efficiency, thermal performance, protection and cost-effective manufacturing The engineer should recommend a suitable power-stage topology, explaining the trade-offs in efficiency, isolation, complexity, component cost and manufacturability. 2. Required Engineering Deliverables A. Circuit Design and Documentation Complete functional block diagram Full circuit schematics Editable native schematic files Power-stage calculations and component-selection rationale DC-link, gate-driver and protection circuit designs Solar MPPT and battery charging circuitry Grid-interface and output-filter design Thermal management and component derating documentation B. PCB Design and Manufacturing Files Editable native PCB layout files Gerber and drill files PCB fabrication and assembly drawings Component footprints and libraries Complete BOM with manufacturer part numbers Suggested component suppliers and alternative parts Connector, wiring and assembly documentation Preferred EDA tools include Altium Designer, KiCad, OrCAD or an equivalent professional platform. C. Firmware and Control Software Provide complete firmware source code or an agreed, sufficiently detailed control implementation. Required functions include: Grid voltage and frequency synchronisation Digital inverter control and current regulation Solar MPPT algorithm Lithium battery charging and discharging control Grid import/export power control Self-consumption prioritisation Programmable export limits Scheduled battery charging based on time-of-use tariffs Fault detection, logging and safe shutdown Monitoring and communication interfaces Deliver the source code, build instructions, required libraries, configuration settings and programming documentation. D. Grid Interaction and Protection The design must address: Anti-islanding protection Grid overvoltage and undervoltage protection Grid overfrequency and underfrequency protection Overcurrent and short-circuit protection Battery overvoltage, undervoltage and overcurrent protection Overtemperature protection Appropriate grounding, isolation, creepage and clearance DC injection and residual-current considerations Safe transitions between grid-connected and backup operation Export limiting using suitable metering or current sensing The engineer must identify the applicable Indian grid-interconnection and product-safety standards. IEEE 1547 or equivalent requirements should be considered where relevant. Certification must not be claimed unless the applicable testing and approval processes have been completed. E. Monitoring and Communication Provide a basic monitoring interface or documented communication implementation supporting Wi-Fi and/or RS-485. Monitor at least: Solar voltage, current and power Battery voltage, current, state of charge and status AC voltage, current, frequency and power Grid import/export power Operating mode and power limits Temperature, alarms and fault codes Energy-generation and consumption data Modbus RTU over RS-485 is preferred where appropriate. F. Simulation and Test Plan Provide simulation files and results where applicable, along with a documented validation plan covering: Conversion efficiency and power losses MPPT operation Battery charging and discharging Load-step and transient response Overload and short-circuit protection Thermal performance Grid synchronisation and export control Anti-islanding validation Monitoring and communication Prototype commissioning and troubleshooting Clearly distinguish simulated results, estimated performance and measurements from a physical prototype. 3. Preferred Qualifications Applicants should have demonstrable experience in: 1–5 kW solar or hybrid inverter design Grid-connected power electronics SPWM, current-mode control and digital control loops MPPT and bidirectional DC/DC converters Lithium battery charging systems DSP/MCU firmware development Power MOSFET, SiC or GaN device selection Gate drivers, EMI/EMC and thermal design High-current and high-voltage PCB design Prototype testing and troubleshooting Experience with dsPIC, STM32, TI C2000 or comparable controllers is preferred. Please specify the tools you use, such as Altium, KiCad, MATLAB/Simulink, PLECS, LTspice or PSpice.
Project ID: 40759419
16 proposals
Remote project
Active 1 min ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
16 freelancers are bidding on average ₹53,859 INR for this job

Hello, I trust you're doing well. I am well experienced in machine learning algorithms, with nearly a decade of hands-on practice. My expertise lies in developing various artificial intelligence algorithms, including the one you require, using Python, and similar tools. I have worked with pytorch, and tensorflow to develop DL models, .I hold a doctorate from Tohoku University and have a number of publications in the same subject. My portfolio, which showcases my past work, is available for your review. Your project piqued my interest, and I would be delighted to be part of it. Let's connect to discuss in detail. Warm regards. please check my portfolio link: https://www.freelancer.com/u/sajjadtaghvaeifr
₹56,250 INR in 7 days
7.9
7.9

Having worked extensively in the field of Power Electronics with a specialization in Renewable Energy, I am well-suited for your residential-scale hybrid solar inverter project. My proficiency extends to the design and implementation of AC/DC converters, DC-DC converters, battery chargers, and solar inverters – all key components for your system. Additionally, my experience with digital motor control and analog design will ensure the high efficiency, reliability, and safety you’re seeking for your pure sine-wave hybrid inverter. I can deliver all required engineering deliverables – from comprehensive circuit designs, PCB layouts using Altium Designer, through to full firmware source code. My firm grasp on grid-interconnection protocols and product-safety standards like IEEE 1547 would be invaluable ensuring we comply with all necessary regulations. As you value an open-source approach, I can provide editable native files for easy modifications and repurposing if required. Moreover, I have deep-rooted experience in PCB design and manufacturing files using Altium Designer, as well as relevant skills in embedded systems that encompass popular platforms such as ESP32, ESP8266, PIC18,PIC24,PIC30 and dsPIC amongst others. All this means I am more than adept at handling the complexity of the project at hand. Rest assured, my commitment will remain steadfast towards offering you a cost-effective yet innovative solution that ticks all the right boxes.
₹70,000 INR in 20 days
7.5
7.5

Hello, I’m a Hardware Design Engineer with experience in embedded systems, power electronics, and multilayer PCB design. I can help develop your hybrid inverter from system architecture and power-stage design to PCB layout, embedded control, and manufacturing documentation. My approach includes evaluating suitable topologies for solar MPPT, bidirectional battery conversion, grid synchronization, and backup operation, with careful attention to efficiency, thermal performance, EMI/EMC, protection, and manufacturability. I use KiCad, EasyEDA, LTspice, and STM32 development tools, with experience designing automotive and industrial hardware involving power management and communication interfaces. I recommend starting with a detailed feasibility and architecture review to define the voltage ranges, isolation requirements, power-stage topology, and applicable Indian grid-interconnection standards before proceeding to detailed design and prototype validation. I can provide editable design files, BOM, manufacturing outputs, firmware implementation, and a structured testing plan. Grid-connected operation and safety compliance would need to be validated through appropriate prototype testing and certification. I’d be happy to discuss the project scope and determine whether an existing reference design or a custom architecture is the better starting point.
₹37,500 INR in 7 days
5.6
5.6

With a wealth of experience and knowledge in Circuit Design, Electrical Engineering, Electronics, and Firmware Development, I believe I am the ideal candidate for your project. Not only have I worked on similar hybrid solar inverter design projects, but I've also successfully overseen the integration of various renewable energy sources with the power grid. I will utilize this expertise to optimize the efficiency, reliability, and safety of your 3-5 kW residential hybrid solar inverter. My understanding of solar MPPT and battery management systems combined with my ability to recommend power-stage topologies based on efficiency and manufacturability will ensure a robust design that fully meets your specifications. Using my solid firmware development skills, I will create a highly efficient digital control system that harmoniously integrates the inverter's various functions — from solar input management to grid synchronization and power export. Rest assured that all elements of grid operation will be meticulously addressed to provide seamless and safe transitions between different operating modes.
₹56,250 INR in 7 days
5.1
5.1

With over X years of experience in Electrical Engineering and Circuit Design, I am confident that I am the right Freelancer to take on this project. I have successfully completed numerous projects similar to yours and exceeded client expectations every time. My proficiency in using professional tools like Altium Designer and Matlab will ensure a meticulous approach to designing a residential-scale hybrid solar inverter that meets your specific requirements. I possess expertise in working with MPPT controllers, grid-connected converters, and bidirectional battery systems – all crucial components for your project. Having previously worked on similar designs, I understand the complexities involved and can expertly navigate efficiency, isolation, complexity, cost, and manufacturability trade-offs to ensure an optimal design that strikes the right balance for you.
₹56,250 INR in 7 days
5.2
5.2

Hi, I’ve carefully read and understood the requirements. My background includes power electronics, embedded hardware, power management, and multilayer PCB design, using tools such as Altium, KiCad, and LTspice. I can contribute to the hardware design, power-stage analysis, component selection, high-voltage PCB layout, thermal considerations, protection circuits, and manufacturing documentation. I can also help assess suitable inverter topologies and develop a simulation and validation plan. For a commercial grid-connected inverter, control firmware, anti-islanding, and grid compliance would require dedicated design and validation before certification or production. You can check my portfolio for my previous power electronics and multilayer PCB projects. Best regards, Ahmed
₹43,000 INR in 7 days
4.6
4.6

Hello Sir/Madam, I have a PhD and 10 years of experience in power electronics, electrical engineering, and MATLAB/Simulink projects. I can support the design and development of your hybrid solar inverter, including power-stage design, MPPT, battery charging, digital control, and grid integration. I will focus on efficiency, safety, reliability, and cost-effective manufacturing, with clear documentation for each stage. I would be happy to discuss your requirements and work with you toward a validated prototype. I look forward to working with you. Let’s connect in the chatbox for further discussions. Thank You. Dr. Divya.
₹37,500 INR in 7 days
4.2
4.2

Hello, For a 3–5 kW hybrid solar inverter, I believe the first step should be validating the system architecture before committing to the complete PCB and firmware design. A few technical points need clarification: 1. Is the 5 kW rating required for all battery voltages? At 12 V, the battery current would exceed 400 A even before accounting for conversion losses. 2. Is galvanic isolation mandatory between the PV/battery stages and the grid? 3. Do you already have a validated reference topology or prototype? 4. Which Indian grid-interconnection standards and certification targets must the final product meet? My background includes electronic hardware design, PCB layout, power-electronics fundamentals, and circuit simulation using LTspice and MATLAB/Simulink. I can contribute to an initial engineering phase covering topology comparison, preliminary power-stage calculations, simulation, and schematic/PCB design support. For a commercial grid-connected inverter, I would recommend separate milestones for architecture, simulation, hardware design, firmware, and physical validation, with experienced grid-inverter engineering oversight. I would be happy to discuss the initial design phase and its deliverables. Best regards, Hamza El Amraoui
₹50,000 INR in 20 days
2.8
2.8

As an RF and electronics engineer with a specialization in high-frequency systems and advanced electronic design, I am confident that my team and I are the perfect fit for your residential-scale hybrid solar inverter project. With years of experience in circuit design, product design, and electronics engineering, we possess the skills necessary to develop a reliable, efficient, and cost-effective inverter. Our portfolio showcases our expertise in various areas relevant to your project's needs. We excel at designing complex circuits while ensuring high efficiency, thermal performance, and robust protection. Our proficiency with tools like KiCad, Altium Designer, and OrCAD guarantees that we can deliver editable native files that suit your preferences. Moreover, our familiarity with MATLAB-based modeling and signal processing would be instrumental in developing an efficient and accurate MPPT controller. In terms of certifications, safety features, and grid interaction compliance laid out in the project description, our team always adopts a meticulous approach using the most relevant professional standards like IEEE 1547. We understand the importance of meeting not only Indian grid-interconnection requirements but also ensuring utmost safety for users. While we always stand by our work quality, we would never claim certifications without rigorously completing all applicable testing and approval processes.
₹56,250 INR in 30 days
2.5
2.5

Hi, I can help with the system architecture, power-stage design, PCB development, embedded control planning, and technical documentation for a residential hybrid solar inverter. Proposed Approach Define the system architecture and select a suitable inverter topology and battery voltage. Develop schematics, power-stage calculations, component selection, protection circuits, and PCB layouts. Plan MPPT, battery charging, digital inverter control, grid synchronisation, and RS-485 Modbus monitoring. Prepare simulation files, manufacturing documentation, and a structured validation plan. Deliverables Functional block diagram and editable schematics. PCB design files, Gerbers, drill files, BOM, and assembly documentation. Firmware source or agreed control implementation with build documentation. Protection design, simulation results where applicable, and test plan.
₹60,000 INR in 45 days
2.3
2.3

Hi, I’ve reviewed the full requirements. This is a complete hybrid inverter development project covering power electronics, MPPT, battery management, grid synchronization, protection, firmware, PCB design and validation. I can support: • 1–5 kW system architecture and topology selection • 230 V / 50 Hz pure sine-wave inverter design • PV MPPT and bidirectional battery DC/DC stages • Grid synchronization and import/export control • DC-link, gate drivers, sensing and LC/LCL filters • Anti-islanding, OVP/UVP, OCP, thermal and short-circuit protection • Schematics, PCB, Gerbers, BOM and manufacturing documentation • STM32/dsPIC/TI C2000 control architecture • MPPT, SPWM/current control and fault-management firmware • RS-485/Modbus and Wi-Fi monitoring • LTspice/PLECS/MATLAB simulation and validation planning • Thermal, EMI/EMC, creepage and clearance considerations I would first confirm the power/battery variants, isolation strategy and applicable Indian grid/safety requirements before freezing the topology. All simulated, estimated and prototype-measured results will be clearly distinguished, and certification will only be claimed after applicable testing and approval.
₹50,000 INR in 7 days
0.0
0.0

To support the wide 12V–96V LiFePO4 battery range while maintaining the necessary galvanic isolation for low-voltage safety, I recommend a bidirectional Dual Active Bridge (DAB) or LLC resonant converter for the battery stage. This will be paired with a standard boost converter for the solar MPPT and a full-bridge inverter utilizing high-efficiency SiC MOSFETs to generate the 230V/50Hz pure sine wave. I develop all hardware in Altium Designer, ensuring the PCB layouts are meticulously routed for high-current thermal dissipation, strict high-voltage creepage and clearance standards, and EMI mitigation. You will receive the native schematics, complete Gerber files, and a production-ready BOM. For the control architecture, I utilize industry-standard TI C2000 or STM32 platforms. The delivered firmware will include fully commented C source code executing the SPWM digital current-mode control, robust PLL grid synchronization, MPPT tracking, and time-of-use load dispatching. To ensure commercial viability, the design will integrate active anti-islanding protection and voltage/frequency ride-through logic aligned with IEEE 1547 and Indian grid standards like IS 16169. The system will also feature an RS-485 Modbus RTU interface to push real-time telemetry, including solar yield, battery state of charge, and fault codes.
₹45,000 INR in 7 days
0.0
0.0

Hello, We are a power electronics engineering team specialising in inverter design, embedded systems, PCB design, and firmware development. We can support your residential hybrid solar inverter project, covering power-stage design, MPPT control, bidirectional battery charging, pure sine-wave generation, embedded firmware, PCB development, and physical prototyping. Our focus is on developing a high-efficiency, reliable, safe, and production-ready solution. Share your requirements or existing files, and let’s discuss further please give us opportunity Best Regards, Team OSTronik India
₹56,250 INR in 7 days
0.0
0.0

Hello, I am an Electrical Engineer experienced in power electronics, control systems, circuit design, PCB development, embedded systems, and MATLAB/Simulink simulation. I can help develop your hybrid solar inverter through a structured engineering approach. My proposed deliverables include: • Power-stage topology selection and design calculations. • Circuit schematics, component selection, gate drivers, and protection circuits. • PCB layouts, BOM, Gerber files, and manufacturing documentation using Altium or KiCad. • Control architecture for SPWM, MPPT, battery management, grid synchronisation, and power regulation. • RS-485/Modbus monitoring and communication. • Simulation and validation plans covering efficiency, thermal performance, transient response, and fault protection. I recommend starting with requirements analysis and topology selection, followed by simulation, hardware design, firmware development, and prototype validation. Applicable Indian grid standards and safety requirements will be considered. To finalise the architecture, please clarify whether you have an existing reference design, your preferred battery voltage, and whether galvanic isolation is required. I can provide editable engineering files and documented deliverables within the agreed scope, clearly distinguishing simulation results from physical prototype measurements. I look forward to discussing your project. Best regards, Electrical Engineer | Power Electronics & Embedded Systems
₹56,250 INR in 7 days
0.0
0.0

Idukki, India
Member since Dec 3, 2019
$250-750 USD
₹1500-12500 INR
₹1500-12500 INR
$10-30 USD
₹12500-37500 INR
₹37500-75000 INR
$25-50 USD / hour
$30-250 USD
$250-750 USD
$250-750 AUD
£250-750 GBP
£750-1500 GBP
₹75000-150000 INR
€8-30 EUR
$10-30 USD
$30-250 USD
$25-50 USD / hour
$250-750 USD
₹75000-150000 INR
$500 USD