Troubleshooting our design circuits

Hi there,I'm biddin on your project "Troubleshooting our design circuits" I have read your project description and i'm an expert in Mechanical Engineering domain therefore i can do this project for you perfectly.I still have a few questions. please leave a message on my chat so we can discuss the budget and deadline of the project. Thanks. .. .

Hello, thank you for your job posting. I read your description about--CIRCUITS I am a senior electrical engineer. I have plenty of experience in firmware development and micro-controller developments. I can write the firmware based on Arduino, Raspberry Pi, Pic, Atmega, FPGA, ARM, DSP, PLC and so on. And I can design the circuit by the Altium, Eagle, KiCAD, Allegro & OrCAD, PADs. I provide the services - Gerber files, Netlist generation, BOM generation and 3D Models of PCAD and ECAD. I am also good at AutoCAD, Solidworks. And I can simulate all circuits with Proteus, LT-spice, Matlab, Simulink, Multisim, and Labview as well. Due to my experience in firmware development, I will bring you the perfect result in time with high quality. I will also give you a detailed explanation of the process. Looking forward to hearing from you soon Thanks

Hi. I am an electronic engineer with rich experience in circuit design and simulation. If you want, I will show my previous workings for circuit design and simulation. Please let me discuss about your project in detail. I will keep good communication with you. Best regards, Andrii.

I have over 35 years experience as an electronic design engineer, please see my profile for more details. If you think I can help then please send me further information Best Regards Dave Lelievre

hello I am a computer engineer,I have masters in computer engineering,I have experience for more than 8 years in arduino and electronics

Dear Client. I have just read your job description and your project is really interesting to me. I have many experiences working for 12+ years with Circuit design, PCB design, manufacturing functional prototyping with firmware programming and testing especially. Here are some of the experiences that I built ago. - Schematic and PCB design and Layout using Altium Designer, Eagle. - high-speed, flexible, Multi-Layer PCB design. - DDR, motor control, power converter, POE, UART, SPI, I2C, RF, BLE, LED lighting design. - ARM, DSP, MCUs, Arduino, Raspberry pi experiences. I am sure I can complete it on time with high quality. If you hire me, I can start to work for your job immediately. I'll do my best for you. Thank you for your time. Best regards.

General message: Dear Sir, Greetings from Turkey. I hope you are good. Let me introduce me. I'm Electronics Enginner who have 19 year experience. My experience is related to power electronics, hardware design, analog design, PCB design and microcontroller coding. My projects summary is attached. Please look them. If you look them you will see that I'm ideal person who can make your project without any problem. Some examples are attached. It shows my ability to make your project. Any questions you can ask me. We can talk details of your project by using SKYPe and Whatsapp. Please give me your SKYPE and mobile phone number. My SKYPE: makinmakin35 I can agree budget which you can pay. Please tell me your expected budget. Please give me your project. I promise that I will give good solution. Please respond to me. I hope you will select me. Have a good time Cheers Metin

Greetings! I’m very much interested to your project description about--- I have a degree in Electrical Engineering over 5 years of experience, therefore, I can easily do this job. You can message me to discuss the details. Why me? My goal is to offer services to you that are profitable. I don’t want you to place an order once and that’s it. For me to be successful, I need you to come back and order again. Give me the opportunity to work on your project. I wish to build a long-term relationship with you. We can have further discussion in chat. Thanks! you can visit my freelancer profile to check the reviews of related tasks https://www.freelancer.com/u/arifbilal75 Warm Regards: BIlal

Hi, I'm an Electrical and Electronic Engineer based in South Wales. I have industrial experience in Aerospace and Harsh Environments. I'm sure I can help you with your design reviews and troubleshooting. If you have any questions feel free to get in touch through the chat function. Thanks!

Hello, Sir. I'm sure i can help you my best. I hope you discuss the project with me kindly. Waiting for your reply. Thank you.

Hello, Please don't hesitate and contact me over the chat. I am a senior Electronic Engineer, with several years of experience with domain areas like PCB design, software and firmware development, networking, information security. I am in charge of the electronic department at Technology University (UTEC) And also I tech Analog/Digital Electronic Instrumentation, and Information Technologies for Biomedical Engineering grade. I am very passionate about my work I really enjoy that I do. I look forward to hearing from you. Regards, Alejandro

ear Client. I have just read your job description and your project is really interesting to me. The Items you raised are similar to what I have already done in practice and I think you can do it in a short time if you have a little explanation. I'm an expert having specialization in Electronic Engineering Design. Embedded system based on Microcontroller (ATMEGA, AVR, STM8, STM32, MSP430, TMS320, PIC ...) A system based on development boards(Arduino, Node MCU, Bluechip, Teensy,…) Antenna design & Analog circuit/RF communication circuit designing and simulation using Proteus, P-Spice, Tina Pro, ADS, CST, Ansys, HFSS Bluetooth, WIFI High-Speed layout using HyperLynx PCB layout designing, providing GERBER and BOMs, 3D files using Altium, EAGLE, Kicad, EasyEDA… Programming firmware of Microcontroller & C++ BMS I think my many design and practical experiences can help you design your project and give you enough satisfaction. I look forward to your response. Best Regards.

Hi We are an Australian hardware, software development and IT services company. We have developed many devices and complex IT solutions for clients across the world so would be glad to assist you with troubleshooting your circuits, we can also provide PCB manufacture and related services should you need them to streamline the whole process for you. We have been brought in several times in locations such as London, Taiwan and Sydney to "debug" hardware and transition it to a product suitable for mass manufacture. We have a wide range of skills, please check our profile for more information https://www.freelancer.com/u/wyari. Please contact us via chat if you wish to proceed so that we can clarify requirements, timing, costs etc.. Thank you The Wyari Team

Hello Mr, Mrs, I am from Indonesia, graduated from computer Engineering and work in power plant as position control and Instrumentation and experience almost 5 years, i have experience to troubleshooting electrical control circuit for motorized valve at field depand on electrical diagram as reference and experience arduino project almost 2 years. consists of: 1. Schematic diagram 2. Programming 3. Simulation 4. Implementation 5. Testing and result Best regards Jonathan

Please provide detail information

Thanls for your requirement. I have more than 3 years of experience in designing electronics circuits, I am working as an R&D engineer and I am mainly working in embedded, analog, digital and power electronics system designing. I have already completed more than 100 projects in my field including low power to high power power electronics projects, IoT projects, Live tracking... also I am providing circuit debugging services to our client. I can help to fix the hardware related bugs of any circuit and PCB related circuit. I can developed PCB using the industry leaded tools OrCAD, Altium designer, Eagle, KICAD. I have more than 2 years of experience in all of the PCB design softwares. These are the area where I can you fixing your circuit. 1- Analog circuits ( Pure analog, Op amp, Converters... ) 2- Digital and logic circuits 3- Power supply and power electronics circuits ( AC to DC converters, DC to DC, Dc to AC, Buck, Boost , Battery chargers... ) 4- Embedded system development ( Sensors reading, actuators controlling, data analysis, IoT controllers ) 5- PCB designing and erros fixind and manufaturing assistance in Altium, OrCAD, Eagle, Kicad... 6- Product testing and varification. 7- Embedded software developing using AVR, PIC, ARM ... I have questions about your week description like in which area you need my help so could you please reply me with more details. Thank you.

Dear Client, I have 8 years of experience in Circuit deisgn and product development . Please have a look at my profile and contact me if you are interested