Fan Controller Embedded Software

Encerrado Postado há 2 anos Pago na entrega
Encerrado Pago na entrega

We have a fan controller board with 7 fans (MR3010H12B1+6-RSR) that have 4 wire signalling. The board also has RS232 connectivity with a host board.

The embedded software:

1) Must be able to drive all fans at the same speed (no per fan speed control required).

2) Fan throttle must be 0%, 10%, 40%, 70% and 100%.

3) A status LED must be used to show the status of the drive.

4) Last set fan throttle must be kept in flash memory and after a power failure, the last set fan speed must be used.

5) RS232 must be used to communicate with a host system. The host system will have fan speed commands to send the board.

6) In case communication does not happen for more than 30 seconds, the system must throttle the fans to %100.

7) Input current sense pin must be checked to see if the provided power is good. If it is not the host system must be alerted.

8) All fan speed inputs must be watched and in case a fan does not work as requested the host system must be alerted.

9) Communication protocol with the fan can be a simple ASCII based protocol with CRC as the last byte.

10) Commands and erroneous commands must be handled correctly by the embedded software.

We need the embedded software written in C and Keil development environment.

Schematic of the board will be provided after the bid is accepted.

Eletrônica Microcontrolador Programação C Engenharia Elétrica

ID do Projeto: #31540534

Sobre o projeto

22 propostas Projeto remoto Ativo em há 2 anos

22 freelancers estão ofertando em média $586 nesse trabalho

Devpro11

Hi, Dear client! *********************************************************** SHARING IDEAS AND INSPIRATIONS FOR YOUR PROJECT. PROVIDING A GOLDEN OPPORTUNITY TO RECEIVE THE BEST TECHNICAL SERVICE. ********************** Mais

$750 USD in 7 dias
(35 Comentários)
5.9
fawadazeem1

Hello I am PhD in Electrical engineering and Expert in system design. I can provide you perfect coding in c for the given conditions. I will also test the coding before handing over it you. If you find any glitch in th Mais

$650 USD in 7 dias
(14 Comentários)
4.7
mahmoudralizadeh

Hi what is your microcontroller ? let's talk about more details of your devices i am an electrical engineer with experience in microcontrollers thanks

$300 USD in 6 dias
(14 Comentários)
4.5
intellisenseIN

Hi, Whether the Fan has IR BLE or WIFI? We have already done many IoT projects. We are a professional team. Kindly spare some time for the interview. We will be glad to hear from you! Regards, Harjit Singh

$950 USD in 30 dias
(4 Comentários)
4.2
dominicnzioka197

EXPERT IN NAMED SKILLS, OVER 18 YEARS OF EXPERIENCE, DEAR EMPLOYER, After KEENLY reading your description and being in possession of all CLEARLY STATED REQUIRED SKILLS as this is my area of PROFESSIONAL SPECIALIZATION Mais

$500 USD in 7 dias
(13 Comentários)
3.8
DenisSoldatov

Hello. I am an expert for Embedded System Design. To design the hardware (circuit design and PCB layout) and develop the firmware is my main skill. I already have experience controlling FANs and RS232. I use STM32 with Mais

$300 USD in 3 dias
(7 Comentários)
3.6
techgenindia

Hi, We would need the schematic to quote for the price and the time. We need to know the Microcontroller that is used. We can sign a NDA if that needs to be. We would also need the actual PCB to be shipped to us or Mais

$1000 USD in 90 dias
(1 Comentário)
3.3
muslum98

HELLO I AM PROGRAMMER I KNOW THIS PROGRAMMING VERY WELL I KNOW EMBEDDED PROGRAMMING VERY WELL FOR MORE INFO LET ME DISCUSS

$500 USD in 7 dias
(2 Comentários)
2.5
omer19

hello, I have seen that you need an experienced C++ expert for Fan Controller Embedded Software. I am a professional C++ expert with more than 10 years experience. I have carefully understood your project requirem Mais

$500 USD in 10 dias
(3 Comentários)
3.0
WritingLabb

Fan Controller Embedded Software I am Minahil Hameed with a vast amount of experience in multiple fields like; Finance & Economics, Accounting & Cost Accounting, Business & Management, Taxation & Auditing. I have achi Mais

$250 USD em 1 dia
(2 Comentários)
0.7
Aliksandr7777

Hello I have 8 years of Embedded System/Software development career. I'm proficient in various MCUs(arduino/raspberrypi/pic/stm32/esp32) and communication protocols(UART/SPI/I2C/CAN/Bluetooth BLE/Zigbee/MQTT). I'm very Mais

$750 USD in 7 dias
(0 Comentários)
0.0
abdullahengg

I am a mechatronics engineer with 6 years of experience in the field of mechatronics and building projects. This is a familiar job for me and will get you a satisfactory solution within 6 to 7 days of time. I will forw Mais

$500 USD in 7 dias
(0 Comentários)
0.0
ankurtech

Dear sir, we gone through your requirement. It’s a very much interesting system. We are interested to work with. We have experience of more than 15 years of experience in this domain. Waiting for your response

$700 USD in 7 dias
(0 Comentários)
0.0
suhasrx100

Hello, I have gone through your requirements and I understand it. My only concern with your requirement is regarding storing last set fan speed, which requires EEPROM, does your selection of MCU has internal EEPROM or Mais

$700 USD in 50 dias
(0 Comentários)
0.0
LEAJDeveloper

Dear Client, I have a lot of experience in the development of business and corporate software, for the following sectors: banking, commerce, communication, industry, medicine and mining. I have more than 25 years of e Mais

$550 USD in 7 dias
(1 Comentário)
0.0
PerfectEmbedded

Hello all, I have done similar type of project in past. I have done many projects in Automotive, Industrial & power sector. Project Completed : 1> Lidar based detection 2> AES140 for Passenger vehicle. 3> ISO15765-2 Mais

$500 USD in 7 dias
(0 Comentários)
0.0
nachus001

I can do this project for you: Upon receiving the board design I'll propose a control protocol and will briefly discuss a simulation system with you, for me to program the system in my lab. Then I will send you the f Mais

$700 USD in 30 dias
(0 Comentários)
0.0
Tyler206

Hi, I am Tyler a firmware engineer with > 5 years experience. Definitely, I can help to complete your project with C and Keil C cause I am quite familiar with them. TO DO that I have some question first. I want to know Mais

$750 USD in 20 dias
(0 Comentários)
0.0