Drone / UAV Development

Encerrado Postado há 7 anos Pago na entrega
Encerrado

Embedded / Firmware Engineer

Job Description

To work as part of our internal R&D / software engineering team helping to design and create firmware for our extensive slate of current projects, plus new and exciting projects for 2018 and beyond. At the higher end you will primarily be programming in a C based environment for SOC’s based on the ARM Cortex Mx series of devices from manufacturers such as STM and Nordic, examples of these being the STM32F0x, STM32F3x, STM32F4x, Nordic nRF51x and Nordic nRF52x. At the lower end there will possibly be some work needed on resource constrained SOC’s such PIC MCU’s from Microchip, or lower end MCU’s from Atmel, although it has to be said that the vast majority of our development is currently ARM based, and we are now moving away from these lower end chips altogether.

You will need to be able to work well in a term, and contribute effectively to that team with your fellow programmers, this will include helping to troubleshoot and problem solve various issues, and helping to design systems and protocols.

You will also be required to produce technical design documents to help prove out solutions to problems, and also for the benefit of other people working / coming onto the project.

We primarily use Keil Studio, True Studio and IAR, but we are open to developers using whatever IDE they are conformable with, as long as we can make it fit within our environment.

Essential Skills

Strong background in C programming

Good understanding of low level comms such as i2C, SPI, UART

Able to operate in often resource constrained environments

Able to read, understand and make use of the data sheets and SDK’s from various vendors

Ability to get familiar and up to speed with new kit very quickly

Would Be An Advantage

Good understanding of IMU’s covering accelerometers, gyros, pressure sensors etc

Embedded Linux knowledge

RF comms including WiFi and BLE

Assembly language

Interests in robots and drones

Use of SVN

Software Integrado

ID do Projeto: #12917472

Sobre o projeto

22 propostas Projeto remoto Ativo em há 7 anos

22 freelancers estão ofertando em média £40/hora nesse trabalho

ibrahimdanish

Hi, I am very much interested in your project as I believe I have the expertise, knowledge, skills and tools to do your project. I am embedded software developer with more than 7 years of experience of professional Mais

£45 GBP / hora
(7 Comentários)
5.2
websat13

hello i am interested in your project. i have worked on projects that uses STM32 microcontroller family. i have also worked with wifi modules (esp07) and ble modules ( pan1720 and pan 1026). regards.

£40 GBP / hora
(4 Comentários)
4.3
SEELaboratory

I have extensive experience in microprocessor programming. I had worked with cortex Mx (in particular STM32F3), 8051, atmega. I used Keil, System WorkBench (STM32), atmelstudio. I am well familiar i2C, SPI, UART. My Mais

£36 GBP / hora
(2 Comentários)
3.2
siddharth0311

Applying on this project as it falls in my domain due to these reasons: Almost 5 yrs in electronics freelance projects on upwork/fiverr Last project was ARM based custom board with embedded firmware. Have decent Mais

£36 GBP / hora
(3 Comentários)
3.3
ircrashed

Hello I have got your job posting “Drone / UAV Development” and I am very much interested to work in your project. I am a circuit designer and have more than 5 years experience of working with the embedded sys Mais

£40 GBP / hora
(0 Comentários)
0.0
beandigital

Hi Is this job based at your offices or can it be done remotely? I have over 10 years of embedded design experience. Please see my portfolio and reviews. Thanks Jon

£36 GBP / hora
(0 Comentários)
0.0
Sanchit2871991

First thing, which RTOS you are going to use for this project? If not yet decided then are you just relying on the State Machine. About me: I have experience on the operating systems, worked extensively on the low lev Mais

£66 GBP / hora
(0 Comentários)
0.0
kafiabdellah

Dear Sir, I’d like to be considered for your project. I am a PhD student in control systems engineering with a strong background on UAV control for both attitude stabilization and position tracking using linear and no Mais

£36 GBP / hora
(0 Comentários)
0.0
AndresEspinal

I recently designed a Drone, in my profile you can see the document (120 pages). My skills: - C programming, embedded systems, various communications protocols (i2C, UART) and sensors like ultrasonic, color, pyro, Mais

£40 GBP / hora
(0 Comentários)
0.0
avinashbaldi93

I'm a certified Electronics Engineer from India and above all the passion of Robotics and Firmware design makes me best suitable for the job as described. I'm a hobbyist for Embedded Systems and want to work with you. Mais

£40 GBP / hora
(0 Comentários)
0.0
ravikumarv22

We are Quantanet Technologies Pvt Ltd based at INDIA. I have 12+ years experience in complete embedded product development including Linux BSP, drivers and applications on ARM based processors and controllers. I have Mais

£40 GBP / hora
(0 Comentários)
0.0
armenhunanyan

In the embedded system development more than 15 years experience in the US/EU companies: 5 years at Cubic Corporation as senior HW/FW engineer. Participated in patent work number US20140022969 (searchable with goog Mais

£44 GBP / hora
(0 Comentários)
0.0
sish6331

Hi, I am a embedded software professional from Sweden who recently started freelancing to support charity. I have 5+ years of experience in safety critical embedded software design and iot. I have a lot of experience Mais

£44 GBP / hora
(0 Comentários)
0.0
adibnia3

Designed multiple generations of PCBs that contained ARM processors, FPGAs, DSPs,, MEMS sensors, interconnects and firmware , 12 years Expedience in embedded systems , living in EU and easily accessible any fu Mais

£36 GBP / hora
(0 Comentários)
0.0
Jigneshkgohil

A proposal has not yet been provided

£38 GBP / hora
(0 Comentários)
0.0