Delta PLC Five-Screen Control Programming

@hayteekeys

HI, KINDLY READ THROUGH MY PROPOSAL I will deliver a clean, fully functional Delta PLC + HMI package exactly matching the five screens in your attached document: precise layout, navigation, Start/Stop commands and hard Emergency-Shutdown on every relevant screen, developed natively in WPLSoft + DOPSoft for direct loading on your system. MY APPROACH ✅ Phase 1: Import your I/O map and tag list, implement ladder logic for Start/Stop circuits and e-stop interlocks. ✅ Phase 2: Build all five DOPSoft screens with exact layout, button actions and navigation. ✅ Phase 3: Simulation testing + short test report proving correct Start/Stop/E-Stop behaviour. RELEVANT PROJECTS • Delta PLC + DOPSoft HMI for packaging machine (5 control screens, Start/Stop + hard E-Stop on every page, exact layout match, delivered ready-to-load projects) DELIVERABLES • Complete WPLSoft project (.dvp) with commented ladder logic • Complete DOPSoft HMI project (.dop) with all five screens • Short test report / simulation capture • Quick loading & testing guide QUESTIONS 1. Can you share the I/O map / tag list and any specific PLC model now? 2. Any particular screen you want reviewed first? 3. When would you like the first version for testing? Ready to start immediately after receiving the tag list.

@cesur135

As an experienced professional in the field of Industrial Automation, particularly with water and wastewater treatment plants, I possess a robust skill set that aligns perfectly with your Delta PLC Five-Screen Control Programming project. My competence in WPLSoft for PLC programming alongside DOPSoft for HMI design ensures that I'm well-equipped to manage the logic development and screen layout exactly as required, ultimately enhancing the functionality of your machine. Not only have I extensive knowledge of the Delta environment, but I have also executed similar projects in different scenarios using varied platforms such as SIEMENS and ABB. This diversity in my portfolio is corroborated by successful ventures in energy automation, plant ventilation systems, and even the installation of chocolate machines, which demand unwavering accuracy. My ability to adapt quickly, deliver results consistently, and maintain outstanding attention-to-detail throughout these varying projects will no doubt serve us well in achieving your desired outcome.

@nichitav7

Hello I will implement your five-screen Delta PLC HMI by directly mapping your I/O list into WPLSoft ladder logic and synchronised DOPSoft navigation to ensure deterministic Start/Stop and E-stop behaviour. Your system will be built as a clean, control-first interface with no visual overhead—only functional elements tied to reliable PLC logic. The focus is on safe interlocking, immediate response, and predictable operator control across all five screens exactly as per your layout. Approach: - Confirm full I/O address map + screen layout from attachment - Build WPLSoft ladder logic (Start/Stop seal-in circuits + global E-Stop priority override) - Implement safe interlocks to prevent simultaneous unsafe states - Develop 5-screen DOPSoft HMI with direct control bindings and navigation flow - Validate logic via simulation for Start, Stop, and Emergency Shutdown response Deliverables: - WPLSoft project file (.dvp) with complete PLC logic - DOPSoft HMI project file with 5 operational screens - Short test report confirming functional verification of all critical signals Once aligned with your tag list, I can ensure first-pass compilation and local deployment without conversion issues. Regards, Nichita.

@Feriver

Hello I understand you need a clean, function-driven Delta PLC + HMI implementation using WPLSoft and DOPSoft, structured around five fixed control screens. The focus is strictly operational control (Start/Stop/E-Stop logic), aligned exactly with your provided I/O map and layout, with no unnecessary graphics or UI complexity. I will develop the PLC ladder logic in WPLSoft ensuring proper interlocking for Start/Stop sequences and a robust Emergency Shutdown circuit that is enforced across all screens. In parallel, I will build the DOPSoft HMI project with the five-screen structure exactly as specified, including correct navigation, mapped control buttons, and real-time interaction with PLC tags. Once implemented, I will validate the system through simulation/testing and provide a short verification report showing correct response of Start, Stop, and Emergency Shutdown functions. The final deliverables will be fully loadable WPLSoft and DOPSoft project files ready for your local testing and commissioning. I’m ready to start immediately and will ensure the logic matches your attachment precisely. Please confirm PLC model details and I/O mapping file so I can align the program structure correctly from the beginning. Thanks, Asif

@vimals87

Hello, I understand you need a clean, function-focused HMI and PLC setup for your Delta PLC-based machine, with five control screens built exactly as per your attachment. The goal is to deliver working WPLSoft logic and DOPSoft HMI screens that can be loaded, tested, and adjusted locally without conversion issues. Here’s what I can provide: WPLSoft PLC logic for Start/Stop circuits, Emergency Shutdown interlocks, and control actions mapped to your tag names and I/O address list. DOPSoft HMI project with five screens, correct navigation, functional control buttons, and layout matching your attached document. Testing support with a short simulation/test report showing Start, Stop, and Emergency Shutdown behavior working correctly. I bring over 10+ years of experience in automation software, PLC/HMI logic, control interfaces, industrial workflows, and structured machine operation screens. Just to clarify: Which Delta PLC and HMI model are you using? Will you provide the I/O map and five-screen layout file before development starts? Please come to the chat box to discuss more about your project. Best regards Vimal

@engrhasan01

Are you looking for a clean, production-ready Delta PLC + HMI control system with correctly structured safety logic and a simple, operator-focused interface across five screens? I’m an Electrical and Control System Engineer with 5+ years of experience in Delta PLC programming (WPLSoft), Delta HMI design (DOPSoft), and industrial machine control systems with safety interlocks and start/stop architectures. Deliverables • WPLSoft project file (.dvp) with complete ladder logic • DOPSoft HMI project file (.dpa/.dop) with 5-screen interface • Fully mapped address integration (per your I/O list) • Basic validation report showing: Start response Stop response Emergency shutdown override behavior I focus on clean, reliable PLC logic and operator-safe HMI systems that run exactly as intended on first deployment. Best regards, Hasan A.

@sandipm1307

As an experienced Automation Engineer specializing in PLC programming, HMI design and system integration, I am well-equipped to handle your Delta PLC Five-Screen Control Programming project. Your requirement for a clean, function-focused interface without decorative graphics aligns perfectly with my approach to industrial automation. I prioritize functionality and efficiency over embellishment - every element I design will serve the sole purpose of controlling your machine. I have extensive hands-on experience with Delta systems, particularly the WPLSoft and DOPSoft environments you're currently using. This means not only can I create a robust and reliable logic for the Start/Stop circuits and e-stop interlocks, but my solutions will be readily available for testing and tweaking on-site without any additional conversions needed. Moreover, having worked with multiple industrial communication protocols such as Modbus TCP/RTU, OPC UA, Ethernet/IP, and MQTT,I bring a diverse skill-set to your project. In addition to delivering the WPLSoft project file with all ladder/logic for the Start/Stop circuits and e-stop interlocks plus the DOPSoft HMI file containing the precise five-screen layout you've provided

@SkyDarkside

Hi, I've reviewed your Project Summary. DVP32ES2 + DOP-107BV is confirmed — WPLSoft DVP series + DOPSoft. I understand the full scope: — 5 paths, sequential start (D register delays) and reverse stop sequence (Y0 last ON → start output last OFF) — E-stop (X20 + M202): kills all outputs, resets M0–M4 latches — P/L/H sensor logic with individual D register timers, ignored during stop sequence — 10 programs with full timer sets, saved on power loss — Password levels 0/1/2 for view/edit/defaults — 8 HMI screens including timer settings and default values Deliverables: WPLSoft project, DOPSoft project (8 screens), test report with simulation captures for all paths and E-stop. One clarification: the spec shows 5 path screens but lists M200/M201 as only Path 1/2 RUN buttons — do Paths 3–5 use M202–M204 or a different addressing scheme? Ready to start on award.

@mohamedmahou

Hello, I'm automation engineer with experience in plc programming and development of HMI. Contact me to discuss more about your project Regards Mohamed

@katxarra

Hi there, I can build the Delta PLC/HMI control interface in WPLSoft + DOPSoft, matching your attached five-screen layout and wiring Start, Stop, navigation, and Emergency Shutdown logic to your I/O adress list. I’ll keep the HMI clean and machine-focused, with no unnecessary graphics, and make sure the e-stop interlocks behave safely across all relevant screens. Final handoff will include PLC project, HMI project, and a short simulation/test report. Best, Carlos

@patrickA123456

Which exact Delta PLC and HMI models are being used? Which versions of WPLSoft and DOPSoft should the project target? Can you share the attachment showing the five-screen layout? Do you already have the complete I/O map and tag/address list finalized? One of the biggest challenges in PLC/HMI control projects is making sure the Emergency Shutdown logic reacts instantly and consistently across every screen without creating unsafe restart conditions or communication conflicts between the PLC and HMI. I’ve worked on industrial automation and embedded control projects involving Start/Stop sequencing, interlock handling, real-time machine control, and operator-driven HMI workflows where stability and safety behavior were critical. I can develop the complete WPLSoft ladder logic and DOPSoft HMI project while keeping everything aligned to your provided I/O map and tag naming structure. I’m comfortable working directly in the Delta ecosystem, so the final files will be ready for you to load, test, and modify locally without conversion issues. I’ve previously built control logic for motor-control systems, shutdown interlocks, navigation-based HMIs, and fault-safe operation flows for industrial-style applications. I can reproduce the exact five-screen arrangement from your attachment with working navigation and responsive control buttons.

@hcblanco

Subject: Remote Automation Engineering Support for Your Projects Hello dear costumer, I'm an industrial automation specialist who partners with system integrators and automation firms to deliver reliable, high-quality engineering work—remotely and on demand. If your team faces challenges like compressed project timelines, specialized technical requirements, or capacity constraints, I can provide targeted support across: PLC programming and advanced control logic (Rockwell, Siemens, Schneider, etc.) SCADA/HMI development optimized for operator efficiency and process visibility Industrial networking (Ethernet/IP, Profinet, Modbus, OPC UA) Motion control, system integration, and process optimization I work within established frameworks—ISA standards, structured commissioning protocols, and collaborative project methodologies—so I integrate smoothly with your existing workflows. My clients value the combination of technical depth, responsiveness, and practical problem-solving I bring without the commitment or expense of expanding in-house teams. Whether it's filling a skill gap on a complex integration, accelerating a delayed deliverable, or providing expert review and troubleshooting, I'm equipped to add value quickly. Let's schedule a brief call to discuss your project pipeline and explore how I can support your objectives. Looking forward to connecting,

@alexsanderg3

The key challenge here is building a simple HMI that still behaves safely and reliably, especially with Start, Stop, and Emergency-Shutdown controls repeated across multiple live-control screens. I can create the WPLSoft PLC logic and DOPSoft HMI project based on your exact five-screen layout, I/O map, and tag list. My experience includes PLC/HMI control interfaces, machine operation screens, interlock logic, start/stop sequencing, and emergency-stop handling for industrial-style systems. I’ll keep the HMI clean and function-focused, without unnecessary graphics, so operators can control the machine clearly and quickly. The PLC logic will be structured to handle Start, Stop, and Emergency Shutdown commands consistently, with proper safety behavior and easy local testing. I’ll also include a short validation report or simulation capture showing that the key controls respond correctly. The final files will be delivered in the Delta environment so you can load, test, and adjust them without conversion issues.

@michealh614

Hi, thanks for the detailed scope—it’s clear and very straightforward from a controls perspective. I’m Micheal, and I have solid experience with Delta PLC and HMI development using WPLSoft and DOPSoft for machine automation projects. I’ve developed clean, function-focused operator interfaces with reliable Start/Stop logic, emergency shutdown interlocks, navigation flow, and address-mapped PLC communication. I can build the five HMI screens exactly according to your provided layout, keeping the design minimal, responsive, and fully control-oriented without unnecessary graphics. On the PLC side, I’ll develop organized ladder logic for Start/Stop operations and hard E-stop behavior tied directly to your I/O list and tag structure. Deliverables will include: • Complete WPLSoft PLC project • DOPSoft HMI project with navigation/control integration • Tested Start/Stop and E-stop logic • Short validation report or simulation proof showing correct machine response I focus on stable, readable programming that’s easy to maintain and modify locally after handover. I’m also proactive about clarifying unclear points early to avoid rework and ensure smooth commissioning on your end. I’m available to begin immediately once I review the attachment and address list. Best regards, Micheal