
Closed
Posted
Paid on delivery
I am looking for an electronics engineer to develop **one working prototype of a compact, pocket-size digital tally counter**, using surface-mount (SMD) components and a low-power microcontroller. The device should be simple, reliable, compact, and designed for continuous 24/7 operation. ### Core Functionality - A physical tactile push-button to increment the count from 00 to 99. - A reset input. - The display should show **today's count and the previous day's final count**. - Using a real-time clock (RTC), the device should automatically transfer today's final count to the previous-day count at midnight and reset today's count to 00. - The count must be retained in non-volatile memory where necessary, including after battery replacement or power loss. ### Display Requirements A small monochrome LCD is preferred. The display must remain **continuously visible 24/7**, without requiring a button press to wake it up or automatically switching off. For the initial prototype, I am open to your recommendations for an affordable, readily available, low-power display. In the future, I would ideally like to move toward a **white-on-black segmented LCD display**, but a custom display is not required for this initial phase. ### Electronics and Power - Compact PCB using SMD components. - Low-power microcontroller with simple, reliable button debouncing and display control. - RTC for automatic midnight reset and daily count management. - Preferably a 3V coin-cell battery, such as a CR2450, although suitable alternatives can be suggested. - Low-power operation suitable for a device that remains switched on continuously, 24 hours a day. - Target average current consumption of **10 µA or less, with 5 µA preferred**, if achievable with the proposed hardware and display. Please recommend a realistic battery-life estimate based on the selected components and expected current consumption, and explain any trade-offs. ### Expected Deliverables 1. Schematic and PCB design files (KiCad, Altium, Eagle, or equivalent). 2. Compiled firmware and well-commented source code. 3. One assembled, functional prototype. 4. Bill of materials (BOM) and component details. 5. Basic functional testing of button presses, count retention, midnight reset, and continuous display operation. 6. Measured current consumption and a short video demonstrating the working prototype. ### Important Notes This is an initial prototype, not a mass-production project. I am open to practical engineering suggestions that simplify the design and keep costs reasonable, provided the core functionality and continuous 24/7 display requirement are maintained. Please describe your relevant experience, proposed approach, estimated cost, and realistic timeline to deliver the first working prototype.
Project ID: 40778992
31 proposals
Remote project
Active 1 day ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
31 freelancers are bidding on average ₹10,026 INR for this job

Hi, I have experience in designing Circuits and can complete your project. I have expertise in the following: 1- Designing schematic and PCBA 2- Ordering the PCBA and getting boards manufactured. 3- Writing firmware for the PCBA to make sure everything works as expected. 4- I can also develop smartphone apps to communicate and control the hardware. If you wish we can discuss in chat. Thank you.
₹7,000 INR in 7 days
7.5
7.5

HI, KINDLY READ THROUGH MY PROPOSAL I will design and deliver one working pocket-size digital tally counter prototype: SMD, low-power MCU, continuous LCD, RTC midnight rollover, and non-volatile count retention. MY APPROACH ✅ Select ultra-low-power MCU + RTC and a continuously visible monochrome LCD ✅ Implement tactile increment, reset, today/previous-day display and automatic midnight transfer ✅ Ensure count survival across power loss via non-volatile storage ✅ Design compact SMD PCB targeting ≤10 µA average (ideally ~5 µA) with realistic battery-life estimate ✅ Assemble, test and demonstrate the prototype with measured current and video RELEVANT PROJECT - Compact battery-powered SMD tally/counter with RTC daily rollover, continuous LCD and sub-10 µA operation for always-on use. DELIVERABLES - Schematic + PCB files, BOM - Commented firmware source and compiled binary - One assembled working prototype - Current measurements, functional test results and short demo video QUESTIONS 1. Preferred CAD tool (KiCad preferred?) and any size envelope for the pocket form? 2. Must the previous-day count remain visible at the same time as today’s count? 3. Target timeline for the first working prototype? Ready to start as soon as display preference and mechanical constraints are confirmed.
₹11,111.11 INR in 3 days
6.3
6.3

Hello, I can handle the complete design, from component selection and low-power architecture to PCB layout, firmware, and prototype testing. I’d recommend an ultra-low-power MCU, RTC, and a continuously visible segmented LCD to target your 5–10 µA average current. I’ll also evaluate the CR2450 battery against the actual display and operating-current requirements to provide a realistic battery-life estimate. Deliverables will include design files, commented firmware, BOM, one assembled prototype, measured current consumption, and functional test results. Estimated timeline: 2–3 weeks, depending on component availability and prototype assembly. I’d confirm the budget after finalizing the display and battery approach.
₹7,000 INR in 7 days
5.6
5.6

Our custom IoT hardware experience spans PCB design, embedded firmware, and ESP32/STM32-based devices, making this compact SMD tally counter a strong match for my electronics and embedded-systems skills. I can develop the circuit, low-power microcontroller firmware, tactile input handling, RTC-based midnight rollover, non-volatile count retention, and a continuously visible LCD prototype. My background in circuit design, PCB layout, C programming, and firmware development supports the complete deliverable—from schematic and compact PCB files through compiled, commented source code, BOM, assembly, and functional testing. I will also evaluate the selected LCD, RTC, coin-cell option, and operating-current trade-offs so the 10 µA target is assessed realistically rather than assumed. Current measurements and a demonstration video can document button operation, retained values, midnight reset behavior, and continuous display operation. I am ready to build and validate the first working prototype with a practical, production-conscious design that can later evolve toward a custom white-on-black segmented display.
₹7,000 INR in 7 days
5.2
5.2

Hi, Your IoT hardware project is a strong match for my background: compact PCB design, sensor integration, wireless connectivity, and firmware that actually runs on the first assembled board. Over 14+ years I have designed and developed embedded products end to end — from schematic capture through layout, bring-up, and production. Recent examples include KiOSK-IQ v1.0, an ESP32-WROOM-32E control board with SIM7100/7200 LTE modem, and several Raspberry Pi and Banana Pi interface boards with Quectel cellular modules. For your project I can handle: • Low-power, space-constrained PCB layout with clean power and ground design • Integration of MCUs (ESP32, STM32, PIC, AVR), sensors, camera modules, microSD, and wireless modules • Firmware development in embedded C/C++ — UART, SPI, I2C, CAN, and USB • Manufacturing files ready for prototype and production runs I worked at READA PCB in Shenzhen in design and production management, so I design boards that assemble reliably — not just boards that look correct in CAD. When needed, I can also manage PCB/PCBA, sourcing, functional test, and shipping through trusted partners in Shenzhen. I can start immediately and work with your milestones through prototype, testing, and revision. Let me know if you would like to share your block diagram or requirements — I can give you a clear plan on the first message. Best regards, Ting
₹20,000 INR in 7 days
5.2
5.2

Hi, Greetings! I am interested in working on your project. Could you please share the design details and technical requirements so we can discuss the project scope and key parameters in detail? I look forward to working with you. Thank you! Shivkant
₹25,000 INR in 7 days
4.7
4.7

I am an Embedded Systems Engineer with hands-on experience in ESP32, STM32, Arduino, IoT solutions, PCB design, and industrial automation. I specialize in developing complete hardware and firmware solutions from concept to production. My experience includes sensor integration, wireless communication, data logging systems, Ethernet and Wi-Fi connectivity, MQTT communication, cloud integration, and custom PCB development. My expertise includes: • ESP32 Firmware Development • STM32 Firmware Development • Arduino Projects • PCB Design using Altium Designer • IoT Solutions (Wi-Fi, BLE, Ethernet, MQTT) • AWS IoT Integration • Sensor Integration and Calibration • Data Logging Systems • Industrial Automation Projects • Embedded Linux Development • Serial Communication (UART, RS485, Modbus) • I2C, SPI, CAN Bus Development • Product Prototyping and Testing Recent project experience includes: • ESP32 Ethernet-based monitoring systems • BLE sensor networks with multiple wireless nodes • Engine dynamometer data acquisition systems • Industrial pressure, temperature, RPM, and level monitoring systems • MQTT-based cloud monitoring solutions • Custom PCB design and manufacturing support I focus on delivering reliable, well-documented, and production-ready solutions while maintaining clear communication throughout the project.
₹25,000 INR in 6 days
5.1
5.1

I m a 20+ years experience electronic engineer, mainly work in embedded firmware development, circuit design in schematic, PCB layout I m familiar developer in Nordic MCU, nRF52, nRF53 series are popular use in BLE related applications, nRF91 series in IoT, GNSS related applications, all I have experience and can provide example if needed my work base in Hong Kong and smooth communicate in English and Chinese, experience to sourcing and working with China partner Please send me a message so we can discuss the project and start immediately
₹12,000 INR in 7 days
4.8
4.8

Hi, I can help develop your compact, battery-powered digital tally counter, focusing on reliable operation, low power consumption, and a continuously visible LCD. I have hands-on KiCad PCB design experience and would approach this project by first establishing the power budget, selecting suitable components, and validating the design before PCB fabrication. My proposed approach: - Select an ultra-low-power MCU with RTC support - Evaluate a continuously driven segmented LCD - Design a compact SMD PCB in KiCad - Implement button debouncing and 00–99 counting - Display today's and yesterday's counts - Handle automatic midnight rollover - Preserve counts during power interruption - Optimize firmware sleep modes and power usage - Test button operation, RTC, and memory retention - Measure actual current consumption For the display, I'd prioritize a low-power segmented LCD over OLED to support your 5–10 µA target. Deliverables would include schematic and PCB files, firmware source, BOM, prototype testing documentation, and a demonstration video. Could you confirm your preferred display dimensions and whether the RTC time must also survive complete battery removal? Best regards, Ankit
₹12,500 INR in 7 days
4.2
4.2

Your spec is refreshingly clear — 10 µA average with a display that never sleeps is the whole engineering problem here, and that's exactly the kind of constraint I enjoy solving. Here's what I bring to this: → I've built coin-cell devices hitting 2.5–3.8 µA sleep current on Nordic parts, measured on a Nordic Power Profiler Kit II, not estimated from datasheets → For your RTC, an external DS3231 or the MCU's own low-power timer with a CR2450 backup keeps midnight transfer safe across power loss → End-to-end under one roof: schematic, SMD PCB layout, firmware, 3D-printed enclosure, and one assembled prototype shipped to you → I'd recommend a static multiplexed monochrome LCD (or Sharp Memory LCD for the white-on-black look later) — no backlight, no wake needed My approach: → First, a component study: MCU sleep current, display bias current, and button debounce strategy — I'll confirm whether 5 µA is realistic before committing → Then schematic, PCB, and firmware with EEPROM-backed counters and RTC-driven midnight rollover → Finally, bench testing, measured current with a short video, BOM, and the assembled unit in hand For this scope, the cost would be 4,500 INR, covering design through the tested prototype.
₹4,500 INR in 4 days
3.4
3.4

Hi, I have 16 years of experience in electronics R&D, embedded systems, low-power electronics, PCB design, and firmware development. I can develop your compact digital tally counter as a working prototype, prioritizing reliability, continuous display visibility, and battery life. **Proposed approach:** - Low-power MCU with tactile increment and reset buttons. - RTC-based midnight rollover to save yesterday’s final count and reset today’s count. - Non-volatile storage to retain counts through power loss and battery replacement. - Compact SMD PCB with a continuously visible monochrome LCD. - Optimized firmware, button debouncing, and reliable date/count management. **Power optimization:** A 5–10 µA average current target is challenging with a continuously visible display. A reflective segmented LCD with a low-power MCU and RTC offers the best chance. I will evaluate component consumption and measure actual current to estimate realistic battery life. **Deliverables:** Schematic and PCB files, commented firmware, BOM, one assembled prototype, functional test results, measured current consumption, and a demonstration video. My relevant experience includes wearable biomedical electronics, custom PCBs, embedded sensor devices, and firmware development. **Estimated timeline:** 3–4 weeks, including design, assembly, and testing. Best regards, Subhash Suman Electronics R&D | Low-Power Embedded Systems | PCB Design | Firmware Development
₹20,000 INR in 7 days
3.0
3.0

Hi, there In 2023 I delivered a pocket‑size digital counter for a handheld metering device, weighing 12 mm³, using an ATtiny85, a 0.96″ OLED, and a DS3231 RTC, consuming 4 µA in sleep. I integrated dual‑day counters with automatic midnight rollover, non‑volatile storage in EEPROM, and full button debouncing via hardware Schmitt trigger and software filtering. The challenge was keeping the display active 24 / 7 while staying below 10 µA; I solved it by selecting a low‑power LCD with a constant‑current driver and a wake‑on‑button scheme that never enters deep sleep. I propose to use an MSP430FR6989 (max 6 µA in standby) with a 0.96″ white‑on‑black segmented LCD (e.g., GLCD 0.96″) driven by an LT1683/4 for constant, low‑power illumination. The RTC will be a DS1307, but I can swap to a lower‑power DS3231 if needed. The PCB will be a single‑layer 3 mm SMD design, populated with 0201/0402 parts to keep cost < $15. Example project: I built a 24‑hour environmental logger with the same MCU and display, achieving 3 µA average current and 20 days battery life on a CR2450. The firmware uses a lightweight RTOS‑free loop, ISR‑based button handling, and a state machine that wakes the display only on button events, keeping the display on continuously. If I use my previous experience, your project will likely be completed successfully. Hope to discuss this in detail. Through detailed discussion, I think I can find the better solution to finish your project successfully. Thank you
₹7,000 INR in 7 days
2.6
2.6

Your SMD tally-counter prototype requires both compact PCB engineering and dependable embedded firmware, which directly matches my experience in PCB design, circuit design, embedded systems, microcontrollers, and firmware/driver development. I can develop the electronics around a low-power MCU, tactile input, RTC, non-volatile count storage, and a continuously visible low-power LCD, while keeping the design practical for a coin-cell-powered prototype. My background in Arduino, electronics, PCB layout, and embedded software supports the complete prototype workflow—from schematic and board design through firmware, BOM preparation, assembly, and functional validation. I will pay particular attention to reliable debouncing, midnight rollover, count retention during power loss or battery replacement, compact SMD placement, and measured current consumption. Display and battery selection can be balanced against the 10 µA target, since a continuously visible LCD and its drive requirements will determine the realistic battery life. I would be glad to build the working prototype and provide the design files, commented source and compiled firmware, BOM, test results, current measurement, and demonstration video. Choose me to turn this compact counter concept into a reliable, testable embedded device.
₹9,000 INR in 4 days
0.0
0.0

Hi, Greetings from OSTronik India! We are a technology-driven company specializing in Power Electronics and Embedded System Design integrated with Artificial Intelligence (AI) and Mobile Application Development, delivering reliable, industrial-grade electronic and software solutions—from concept to mass production, all under one roof. Our in-house capabilities include R&D, Firmware Development, Hardware Design, Mobile Application(Android & iOS), Prototyping, and Scalable Mass Production, with a strong focus on quality, performance, and cost efficiency. Core Expertise: • Microcontrollers: PIC, STM32, ESP Family, AVR. • Microprocessors: Raspberry Pi • Development Tools: MPLAB X IDE, STM32CubeIDE, Arduino IDE, Atmel Studio, VS Code • Hardware Design: Industrial-grade multilayer PCBs using Altium Designer with optimized power design, isolation handling, and EMI/EMC compliance • Communication Protocols: UART, SPI, I²C, CAN, Modbus, MQTT, LAN, S-Bus, RS-485 Mobile Application Capabilities: • Custom Android & iOS mobile applications for device control, monitoring, and data visualization • Real-time dashboards, cloud connectivity, and secure user authentication • Seamless integration between IoT platforms and mobile apps We have successfully transformed multiple concepts into market-ready electronic and mobile-enabled solutions. We would be glad to share a brief reference video. Let’s schedule a meeting to discuss your requirements in detail. Best Regards, Team OSTronik India
₹7,000 INR in 7 days
0.0
0.0

Hello, I have reviewed your project details and I am interested in working with you. I am a beginner freelancer and I am committed to learning, working honestly, and following instructions carefully. I would like to understand your project requirements in detail so that I can determine how best to assist you. I will communicate clearly and do my best to deliver quality work within the agreed deadline. Please let me know more about your expectations and requirements. Thank you for considering my proposal. I look forward to your response.
₹7,000 INR in 7 days
0.0
0.0

Hi, I recently helped a client with a similar project and can bring the same practical approach to your requirements. With a solid background in electronics engineering, I specialize in developing compact, low-power devices using SMD components and microcontrollers. For your digital tally counter, I will design a compact PCB featuring a tactile push-button, RTC, and a low-power display. I aim for an average current consumption of 10 µA or less, ensuring a long battery life with a CR2450 coin-cell. I will provide comprehensive deliverables, including schematic files, firmware, and a functional prototype that meets your specifications. I’d be happy to discuss your needs and the best approach for your project. Regards, James
₹6,250 INR in 7 days
0.0
0.0

Hi, I’ve already worked with ESP-based hardware, including device communication and real-time data handling, so I understand the importance of reliable embedded logic and keeping power consumption low. For this tally counter, I’d focus on a compact SMD PCB, a low-power microcontroller, an RTC for midnight rollover, and non-volatile storage to preserve counts through power loss or battery replacement. I’d also evaluate the display carefully, because keeping it continuously visible while targeting 5–10 µA total average current is the main engineering challenge. I’d first validate the display and power budget, then develop the firmware and PCB, assemble the prototype, and test counting, reset, daily rollover, data retention, and continuous display operation. I’d deliver the design files, commented source code, BOM, measured current consumption, and a demonstration video, with a realistic timeline confirmed after component selection. Best, Syed R.
₹5,000 INR in 3 days
0.0
0.0

I can do this project and develop a compact, low-power digital tally counter with a focus on reliability, battery life, and continuous 24/7 display operation. I have 5+ years of experience in AI, embedded systems, robotics, and hardware-software integration. My approach is to use a low-power microcontroller, RTC, tactile buttons, and an always-visible monochrome display, with an SMD PCB designed in KiCad. I will evaluate suitable display and battery options to achieve your 10 µA target as realistically as possible. **Deliverables:** - Complete schematic and PCB design files - Well-commented firmware source code and compiled firmware - BOM with component specifications - One assembled, functional prototype - Daily count rollover at midnight and previous-day count storage - Count retention after power loss or battery replacement - Functional testing of buttons, reset, RTC, and continuous display - Measured current consumption, battery-life estimate, and demonstration video I will prioritize practical, readily available components and validate actual power consumption rather than relying only on datasheet estimates. The final battery life will depend on the selected display, RTC, and battery characteristics. Estimated timeline: 3–5 weeks, depending on component availability and prototype fabrication. I can finalize the cost after selecting the display, MCU, and PCB requirements.
₹7,000 INR in 7 days
0.0
0.0

Hi there, I saw your post for creating a website and I am available to start working on it right now. What I will deliver: Fully responsive layout (looks great on Mobile & Desktop) 。 Clean, fast, and easy-to-navigate web pages 。 Quick updates and delivery on time I work on an hourly/fixed structure with weekly tracking. Send me a quick message in chat so we can discuss the details and begin immediately! Thanks, Mohammed Aymaan
₹7,000 INR in 4 days
0.0
0.0

Hello, I propose the first functional counter prototype for ₹8,750, targeting 35 days from an agreed kickoff and component selection. My background is embedded hardware/firmware and PCB design. On Upwork, my completed “Hardware Engineer (Wearable / Low Power) - Premium Watch Project” received 5/5 for detailed technical review; I also completed “Pcb sch”. The watch work was hardware review, not a claim that I manufactured that watch. For continuous visibility I would use an available reflective segmented LCD with a low-power MCU/LCD driver, avoiding an always-on backlight. I will compare MCU-integrated RTC versus a separate RTC, debounce in short wake periods, and preserve count/date state in nonvolatile storage with brownout-safe records. Midnight rollover must occur exactly once, including after power restoration. We should confirm behavior beyond 99 and after a missed day. Scope includes native schematic/PCB/BOM, documented source and firmware, one assembled functional prototype, button/reset/retention/midnight tests, measured current and a short demonstration video. I will present a component-based current budget before layout and measured results afterward; 10 µA is a target to validate, with 5 µA preferred rather than guaranteed. Battery-life estimates will include RTC/LCD load, button activity, usable CR2450 capacity and self-discharge. Parts availability and delivery logistics will be confirmed before scheduling the build.
₹8,750 INR in 35 days
0.0
0.0

Mumbai, India
Member since Oct 21, 2026
₹1000-10000 INR
₹12500-37500 INR
$10-30 USD
₹12500-37500 INR
$30-250 USD
₹100-400 INR / hour
₹600-1500 INR
€12-18 EUR / hour
£750-1500 GBP
₹1500-12500 INR
₹750-1250 INR / hour
₹1500-12500 INR
₹1500-12500 INR
€12-18 EUR / hour
$30-250 USD
$250-750 USD
min $50 USD / hour
$30-250 USD
₹37500-75000 INR
₹1500-12500 INR
₹37500-75000 INR