Simple Microcontroller Dev. Board Programmer Needed.

I'm looking for someone who can guide me which development board I should get for a small project. Must have a knowledge in development of embeded microcontrollers and writing the software. We have been thinking of using a PIC18 or 16 dev. board.

I would like to use a board which has an LCD for on board "commands and adjustments" like a selection key and ( + / - ) adjustments. It will have about 16 different modes in which the program can select from.

Basically is a microcontroller for an electric actuator. There are 8 inputs, one of the inputs is RPMs from a motor. 8 inputs and 1 output to control the actuator.

The software is pretty simple. Controller receives the inputs from the sensor and the motor's RPM. Then turn the actuator on or off. It will control the actuator depending on which sensor is activated. There will be 16 different possibilities.

Please look at information file for better understanding how the software works. The dark green boxes are the signal which will decide if actuator is on or off.

I would like to be able to scrow up and down though the situations and adjust which sensor would be on or off. Also, change the RPM values per situation.

Thank you for the interest.

Additional information:

Actuator Controller Software: The software must control the actuator (on/off), and give the user options to adjust the input signals.


** 16 different functions.

** 2 selection buttons ( escrow through the functions )

** 2 +/- adjustment buttons ( used to do fine adjustment, turn on or off inputs )

Board will have;

** 8 on/off inputs, 1 will read RPMs from a motor and use that information to control de actuator

** 1 output = controls de actuator

** 1 LCD

Thank you for the help.

All I/O signals are analog. 7 are inputs type ( on or off ), 1 will be motor's RPM. Output will be on or off analog signal.

Habilidades: Eletrônica, Software Integrado, Engenharia, Microcontrolador

Veja mais: must programmer microcontroller development, writing modes, s&c electric, rpms engineering, modes of writing, m.c.m. electronics, key selection, interest on escrow, how to get a programmer, get me a programmer, get help from a programmer, escrow de, electronics programmer, dev software, c&m engineering, be electronics engineering, simple microcontroller board, microcontroller dev, small microcontroller, simple programmer, how to program a microcontroller, writing board, understanding escrow, how escrow works, escrow motor

Acerca do Empregador:
( 17 comentários ) Fort Lauderdale, United States

ID do Projeto: #530484

27 freelancers estão ofertando em média $159 para esse trabalho


Hi, We can help you in this requirement. There are wide variety of basic PIC18F controllers are available in which your requiremnt can meet. Interested to hear more from you\

$150 USD in 30 dias
(6 Comentários)

Dear Mr. fab26x, I can help you solve your problem. I performed a similar project. Details on PM. Redards bulgar

$165 USD in 15 dias
(2 Comentários)

Hello, I can help you out on this. I can suggest a very good pic dev board and a very good high level language for the programming side + help to develop your application.

$100 USD em 1 dia
(1 Comentário)

HI, I can guide you to choose a PIC based development as per your need..

$50 USD in 6 dias
(2 Comentários)

Bidder Comments : Dear Sir, Kindly refer to your PM for more details. Thanks & Regards, SANDS Team.

$120 USD in 10 dias
(3 Comentários)

Please see PM for details.

$700 USD in 30 dias
(1 Comentário)

Read PM Sir :)

$100 USD in 10 dias
(4 Comentários)

You can choose PIC/AVR/8051 derivatives, i can help you choose the Kit:also you have to tell me what type of sensors you intend to use. 1)EM [url removed, login to view],line switch, if you are not sure I can guide you, The da Mais

$200 USD in 7 dias
(4 Comentários)

Hi, Please check your PMB. Regards.

$150 USD in 10 dias
(1 Comentário)

Please see your PM Box

$200 USD in 7 dias
(1 Comentário)

I have already developed such programmer boards to some institutes. On this budget i can provide you the schematic and source code. PIC range microcontroller can be used for your application i'm also have more exp in p Mais

$70 USD in 10 dias
(2 Comentários)

Hello, my name is Mariano and I have experience in designing meassuring/controller devices using microcontrollers and LCD displays. Please check PM for more information. Thank you.

$50 USD in 5 dias
(1 Comentário)

I have various experiences in designing with PIC18 series microcontrollers. The most complicated development I have participated and completed was a pico-satellite.

$100 USD in 14 dias
(0 Comentários)

Hello, I am an experienced engineer working mostly with ARM-Cortex especially, PIC- all types including 24F and AVR uC's. I can help you with the right dev-board for your needs, but there is also the possibility to bui Mais

$150 USD in 10 dias
(0 Comentários)

I had completed lot of project of same kind ,so i can able to complete it quickly.

$40 USD in 6 dias
(0 Comentários)

Hello, We have experience in PIC16-18-24 boards, with a huge variety of peripherals(IO expanders,Char LCD, TFT LCD, motor control, usb, serial, i2c, spi, ...) please take a look to our PM. regards

$200 USD in 40 dias
(0 Comentários)

Hello, we have plenty of experience in the development of PIC-based devices, especially in industrial applications. Please, feel free to ask any questions you may have. Kind regards, Iván

$160 USD in 15 dias
(0 Comentários)

I have several projects that are very close to your description

$250 USD in 10 dias
(0 Comentários)

Hi, our company provide all electronic development services. contact [url removed, login to view]

$140 USD in 2 dias
(0 Comentários)

Hello, I can help you create this project with both PIC/AVR microcontrollers, sugest you compilator and full microcontroller - board simulation if needed before you decide to spend your money on a development board. I Mais

$175 USD in 15 dias
(0 Comentários)