I have done building footting design, which need to be revised as per instruction given below.
Civil expert is required
Steps proposed are
Set your calculations out (similar) to this way.
Measure the roof area.
19.23mtrs x 6.00mtrs = 115.38m2
Calculate the live and wind loads and multiply by (1)
115.38 x 1.7 = 196.15 kN
Calculate roof sheeting and multiply by (1)
17.2 is what we were given as the weight /m2 x 115.38 = 1984.54 N x (Gravity 9.81) = 19468.30 then divide by 1000 = 19.47 kN
Rafter is 610UB weighs 125kg/m therefore 19.230 x 125 = 2403.75 N x (Gravity 9.81) = 23580.79 N then divide by 1000 = 23.58 kN
Column is 321 x 309 UC that weighs 137 kg/m therefore 6.00 x 137 = 822 x 9.81 = 8063.82 divide by 1000 = 8.06 kN
Footing is .8 x .8 x .8 = .512m3 x 2400kg/m3 = 1228.8 x 9.81 = 12054.53 divide by 1000 = 12.05 kN
Now add up all coloured boxes to give you the amount of load in kN on the soil.
Now using soil report check bore hole near grid ( I think it is bore hole #2) what is the bearing capacity.
Recalculate a concrete pad maybe deeper and/or wider to get a to bearing capacity of what you have calculated.
See sample working done by me, which need to be revised
31 freelancers estão ofertando em média ₹3213 para esse trabalho
Hello dear, I am a M.Sc. civil engineer, I am expert in Foundations design so i can help you for sure in your task. I checked the files and i can do this task in the required time. Thanks
I am an Engineer currently in practice. I can do this work impeccably for you. Please do contact me to provide samples of similar past work. Regards.
Presently working in Govt. firm on the Contract basis, and looking into the structural designs of buildings and water supply drainage 7 sewerage projects for the entire state of Haryana (INDIA).
Structural designer with vast experience of Reinforced Concrete structures. The design requirements appear easy. However, please provide few more clarifications if selected.
1. Expert on auto,ating engineering problems. Accuracy guaranteed because of macro usage. 2. 1st day disucssing issues and formats 3. 2nd day programming and solution. 4. 3rd day, finalizing and delivering
i'm qualified civil engineer i'm have so many courses about primavera and rivet and Ms programs also a lot of structural design programs and i have so 5 years of field work experiments