Encerrado

Industrial Evaporator unit - Designing

We are building a small spent caustic treatment plant.

We are looking for a designer for an evaporation unit in this plant.

The feed to the evaporation unit will be 15.7 t/hr of water at maximum with around 12% salts (Sodium Sulfate and Sodium Bicarbonate). Feed specification is attached.

Note that we need to evaporate 10.5 t/hr of the feed.

(Remaining concentrated 5.2 t/hr will be sent to our evaporation pond).

We think of a multiple effect evaporator. We can provide 1 ton/hr of high pressure steam which could be used. If this is not sufficient as live steam for the first effect, then it can be used as TVR for remaining effects and we provide a thermal oil for the first effect.

The design should cover:

1) process design which achieves the above requirements and provide the best design and arrangement that leads to a better economy in capital cost and operational cost. Relevant process documents to be provided.

2) drawings/mechanical documents sufficient to construct the static equipment in a local manufacturer.

3) Sufficient details/documents for the purchase of non-static equipment, ex. pumps.

Further to these can follow in future.

Habilidades: Design de Fabricação, Engenharia, Desenho industrial, Engenharia Química, Engenharia Mecânica

Veja mais: evaporator design basics, evaporator design book, types of evaporators pdf, evaporator design, types of evaporators ppt, evaporation in food processing pdf, single effect evaporator, evaporator design steps

Acerca do Empregador:
( 0 comentários ) Riyadh, Saudi Arabia

ID do Projeto: #20208990

28 freelancers estão ofertando em média $1391 para esse trabalho

maykireos

Hello, We are a Turkey based company and we offer product design & development, electronic schematic & PCB design, plastic injection molding and mass production services to our customers. We can help you to design and Mais

$1500 USD in 20 dias
(64 Comentários)
7.3
ashrafshekh

Hello, Greetings of the day, I have gone through the description & found interesting. I have done many project related to mechanical engineering, 3D modelling, product designing, any kind of simulation, MATLAB, desig Mais

$1125 USD in 7 dias
(70 Comentários)
6.9
yongjun514

Dear, Sir. Here is my profile and portfolio link. https://www.freelancer.com/u/yongjun514?w=f I have read your project descriptions carefully. So I think I can complete it successfully in your timeline. If you hire me Mais

$750 USD in 7 dias
(51 Comentários)
6.3
liveexperts123

Hi there, I have read your project description and i'm confident i can do this project for you perfectly.I still have a few questions. please leave a message on my chat so we can discuss the budget and deadline of the Mais

$1250 USD in 3 dias
(26 Comentários)
6.0
saied2017

السلام عليكم I'm Mohamed Saeed. mechanical engineer with high experience in evaporaization system design with details including components selection as well after design. I will provide you the proposed requirements. I Mais

$888 USD in 2 dias
(47 Comentários)
5.9
bchandra1955

Professional engineer is interested .....................................................................................................................

$1000 USD in 7 dias
(90 Comentários)
6.3
amienaeem

Hi Sir, we are team of highly qualified and skilled professionals in the field of plants and machinery designing, loyouting, planning and resources of purchasing of required parts and equipment etc We provide complete Mais

$1000 USD in 25 dias
(15 Comentários)
5.6
husseinmubarak

I am professional chemical engineer with 17 years experience in process engineering I am professional in process design Guarantee to receive high professional services

$1111 USD in 10 dias
(31 Comentários)
5.3
EngOussamaBaaziz

Hi, I saw your project so I confirm that I can perform requested work with excellent quality . I am a mechanical engineer armed with 12 years of professional experience as an R&D engineer. 3D and 2D CAD design and FEM Mais

$900 USD in 10 dias
(22 Comentários)
5.0
thanhbinh160886

I am here to bring your product to life. I'm a mechanical engineer and I have 8 experience years. Experience type: 3D, 2D models, Render, Sheet metals, Machine and Devices, industrial product, Plastic molds, plastic p Mais

$1500 USD in 7 dias
(11 Comentários)
4.9
Engineeronline

Hi I am a Chemical Engineer with MS in Process Engineering. I can deliver this project.I will prepare detailed design report. I will share weekly progress report. I will also provide free consultation after completi Mais

$900 USD in 20 dias
(9 Comentários)
4.8
hayat38402

I am mechanical design engineer by profession and graduate in mechanical engineering with PG in CAD/CAM, ANSYS & SolidWorks. I can perform almost all kind of simulation like CFD, FEA, structural analysis etc. I have e Mais

$1125 USD in 7 dias
(22 Comentários)
5.0
Mish1106

Hi, Emertion Technologies help you to "Turn your Idea into reality". We help develop your project from earliest stage to production level. We also help in finding best suitable Manufacturer for your product, who can p Mais

$800 USD in 7 dias
(17 Comentários)
4.3
rprocess

Hi, I went through your requirement and can deign the complete system. I am a seasoned process engineer and thus will provide all process deliverable. Will give you equipment data sheets that should be sufficient fo Mais

$1500 USD in 30 dias
(9 Comentários)
4.2
BOND171

Hello we are professional scientific consultant and serves in many pharmaceuticals ,chemicals and food industries,our expertise in process and formulation R&D,industrial process, laboratory setup , certification etc..

$2000 USD in 30 dias
(3 Comentários)
3.8
RafaelRodriguezR

To do this work I will need 30 days because it's so complex. The tension and heat I teract with the materials.

$5000 USD in 30 dias
(3 Comentários)
3.1
ayounis520178

Hello I am process chemical engineer and I am experienced in unit operations design and I am interested in your project and I can start working on it upon awarded. Regards

$833 USD in 30 dias
(1 Comentário)
1.7
zaraza73

I am an electrical engineer, MSC in applied mathematics, PHD. Control and automation. I can do, improve any proposal made by another, with a mutual agreement, with all the details that you need, within my proposal, I c Mais

$1500 USD in 15 dias
(2 Comentários)
2.4
usmanmaan1994

Hye, I am a professional process engineer with five year of experience in engineering consultancy. I have done front end engineering design and detail design of alot of equipments. Specifically according to your task Mais

$833 USD in 5 dias
(3 Comentários)
1.8
SudChemie

The FEED can be prepared with proper details. The project also requires the fabrication details so that the evaporator can be prepared locally if I guessed it correctly. For the mechanical design part, a detailed discu Mais

$750 USD in 7 dias
(1 Comentário)
0.7