Concluído

GI Steel U-Profile FEM Model

Job Description:

Hi Freelancer,

I would like to analyze a 1.5mm thick GI Steel with loads shown in the screenshot. I would like to know what effect would having slot holes have on the U profile with the loadings described below and further information in the attached screenshot.

The U Profile is connected to a 120x60x3mm A36 Steel Box section. Connection to the Steel box section is through two self drilling screws on each side as shown in the photos.

Point load is exerted on the U profile as shown in the photos.

Maximum Uplift Load - 1.63KN

Maximum Downwards Load - 1.83KN

Please let me know if any further information is required. The material for the GI Steel can be considered as A36 Steel.

Thank you.

MH.

Habilidades: Engenharia Mecânica, Engenharia Estrutural, Engenharia, Análise de Elementos Finitos, Engenharia Civil

Sobre o Cliente:
( 1 comentário ) Kuwait City, Kuwait

ID do Projeto: #35401515

Concedido a:

crashcoders

I am a Mechanical Engineer focused on 3D & 2D modeling, Simulation and Stress analysis. I have some good skills in mechanical design with CAD software (SolidWorks, FUSION 360, AUTOCAD, ANSYS & ABAQUS). Have done many Mais

$30 USD em 1 dia
(0 Comentários)
0.0

25 freelancers estão ofertando em média $151 nesse trabalho

sajjadtaghvaeifr

Hi, I hope you are doing fine. I have PhD in mechanical engineering from Tohoku University of Japan. I have published 20 Journal papers and 16 international conference papers. I have a lot of experience in automotive, Mais

$250 USD in 7 dias
(82 Comentários)
7.1
enghamza12

Hello Hamza ,I am detail oriented also I have the competence and professional experience that allow me to do a large amount of work efficiently. This includes receiving a super-professional education that includes int Mais

$140 USD em 1 dia
(190 Comentários)
6.9
tuongeng4

Hi there ! I'm  Senior Structural Engineer . ⭐⭐⭐⭐⭐ ✅  I cheked and very interested with your project. ✅  I done many many project before relate to supply design calculation for approval and drawing fabrication. ✅  3d r Mais

$140 USD in 3 dias
(71 Comentários)
6.6
MohammedZamzam

Hello sir, I’ve read your project considering the need for an expert in structural engineering to help U with analyzing a 1.5mm thick GI Steel with loads shown in the screenshot I’m a civil engineer holding a master's Mais

$50 USD in 2 dias
(50 Comentários)
6.2
NguyenTran1010

Hi, Dear I have read your project description carefully. I am very excited to bid on your project. I am a mechanical engineer and have high skill of mechanical design based on FEA. I have strong skill of SolidWorks, Ab Mais

$100 USD em 1 dia
(36 Comentários)
5.8
EslamWafdy

Hi there! I hope you are doing well. I have read and gone through your job requirements. I can do the required FEA analysis and provide perfect results. I can do the job as per your requirements. Please send me messag Mais

$150 USD in 2 dias
(31 Comentários)
5.5
engrhassanwali

Hello! I have completely read your requirements. I am Mechanical engineer and have 07 years of experience in FEA and CFD. So I have some important questions related to this and also have few suggestions. I am waiting f Mais

$250 USD in 7 dias
(16 Comentários)
5.5
shazemsaadHazem

Hi, My name is Hazem and I have a PhD in computational mechanics and materials. I have an excellent experience in FEM and would like to help you in tackling this problem. I promise to give excellent results in a very Mais

$140 USD in 3 dias
(22 Comentários)
4.9
ENGANS

Hello sir ... i am very interested in your project .. firstly i wonder why the u profile have slot holes While it is held by one screw on both ends, what is the use of the long holes?

$140 USD in 7 dias
(1 Comentário)
3.5
TungMech

Hi , I have read your project carefully. I will FEA in Solidworks simulation Introduce me: I'm Mechanical Engineer (2D/3D modeling /CAD/CAM/CAE/FEA/CNC) I have professional skills in using the software: Autocad, Solidw Mais

$98 USD em 1 dia
(3 Comentários)
2.3
Hamdy2008

Dear Sir, I hope all is going well with you. I’m an Experienced Structural Engineer with a good experience at steel and reinforced concrete structures design and detailing by using international codes and standards and Mais

$140 USD in 7 dias
(4 Comentários)
2.2
ArtaHovs84

Hi, I saw your project details. I am a 3D designer specializing in sketchup, revit, blender, 3d max and autocad. I use Sketchup, Levitt, and Autocad to design 2D and 3D buildings and interiors, and I use Blender, solid Mais

$140 USD in 2 dias
(0 Comentários)
0.0
ghayasa727

I have seen the details and I am Mechanical engineer and have experience in simulation, FEA and designs. Inbox me for further details as I need to ask some questions

$170 USD in 7 dias
(0 Comentários)
0.0
umerpdr313

Hello sir, nice to meet you. I have read your job description very carefully. I am very interested in your project. I think you will save time and money by choosing me. Please hire me. I would like to discuss y Mais

$50 USD in 3 dias
(0 Comentários)
0.0
marcuspov

Hi. I am very happy to bid your project I have just checked your project requirements so I can help you perfectly within 2days. I am a Professional Product Designer/Mechanical & Structural Engineer/FEA/. I have a lot o Mais

$100 USD in 2 dias
(0 Comentários)
0.0
mmahto

I have read your requirements well and it can be done, Send me your full requirements if any and I will send you exact quote. Thanks

$250 USD in 7 dias
(0 Comentários)
0.0
Deepak87k

Hello sir, I am an Aeronautical Engineer, i read the description about GI Steel U-Profile FEM Model so i will do analysis as per your requirements i will try my best to complete this project within your timelines Looki Mais

$250 USD in 7 dias
(0 Comentários)
0.0
Khaledmoh121

I can work on structural softwares and different structural systems such as precast and prestreased concrete steel structural systems

$140 USD in 7 dias
(0 Comentários)
0.0
oceantech27

I am pursuing my Phd in Mechanical Enginnering. So this problem comes well within my domain and I will be able to provide detailed solution for the same within the required time. Also i have my masters in stress and vi Mais

$200 USD in 5 dias
(0 Comentários)
0.0
DanielAven

Hello the proposal is the following. Using the finite element method, I will simulate the loads and deformations of the part. You can see the behavior and critical points. If you give me acceptable tolerances we can i Mais

$100 USD in 2 dias
(0 Comentários)
0.0