Find Jobs
Hire Freelancers

PoE PSE controller with diisplay

$750-1500 USD

Fechado
Publicado há quase 4 anos

$750-1500 USD

Pago na entrega
Develop a smart 4 port PoE PSE controller using the Texas Instruments TPS23861 controlled by MSP430 and ESP32 micro controller with a DC-DC boost power supply. Power will be provided from an external 20 - 24V DC power supply that will need to be converted to the 54V DC for PoE standards. Reference code for MSP430 is available from TI. Would like to use ESP32 for wireless communications and web page host for configuration and reporting. Also, would like to monitor network information, IP address, channel status, and channel power from MSP430 to ESP32 and show on display.
ID do Projeto: 25867621

Sobre o projeto

11 propostas
Projeto remoto
Ativo há 4 anos

Quer ganhar algum dinheiro?

Benefícios de ofertar no Freelancer

Defina seu orçamento e seu prazo
Seja pago pelo seu trabalho
Descreva sua proposta
É grátis para se inscrever e fazer ofertas em trabalhos
11 freelancers estão ofertando em média $1.398 USD for esse trabalho
Avatar do Usuário
Hi I am experienced electronics engineer with more than 15 years of experience in electronic system design. I have worked with POE , boost circuits and ESP a number of times. I would like to discuss it in further detail before I can submit my final quote. Please get in touch to discuss the deliverables if interested in working with me Regards
$1.125 USD em 7 dias
4,8 (270 avaliações)
8,1
8,1
Avatar do Usuário
Hello, thank you for your job posting. I read your description about--PoE PSE controller with diisplay I am a senior electrical engineer. I have plenty of experience in firmware development and micro-controller developments. I can write the firmware based on Arduino, Raspberry Pi, Pic, Atmega, FPGA, ARM, DSP, PLC and so on. And I can design the circuit by the Altium, Eagle, KiCAD, Allegro & OrCAD, PADs. I provide the services - Gerber files, Netlist generation, BOM generation and 3D Models of PCAD and ECAD. I am also good at AutoCAD, Solidworks. And I can simulate all circuits with Proteus, LT-spice, Matlab, Simulink, Multisim, and Labview as well. Due to my experience in firmware development, I will bring you the perfect result in time with high quality. I will also give you a detailed explanation of the process. Looking forward to hearing from you soon Thanks
$1.125 USD em 7 dias
5,0 (144 avaliações)
6,8
6,8
Avatar do Usuário
Hi, I have read the brief details on the job listing. I am a full stack developer with 9 years of coding experience. I have worked with multiple similar jobs before. I have completed 150+ major projects just on this website in last 5 years. Apart from that I have a good team of developers for doing web based jobs of any kind. You can check my portfolio here: https://www.freelancer.com/u/AwaisChaudhry?w=f I believe I can do this job. Lets discuss ! Awais
$1.500 USD em 26 dias
5,0 (9 avaliações)
6,5
6,5
Avatar do Usuário
Hi, I am a post graduate power electronics engineer and having very good experience in product design and development. I am excellent in embedded design & programming using pic, dspic controllers and MATLAB codding for Power projects, Boot loaders, Bluetooth & GPS designs, CAN communication, EEprom. UART , RF circuits ,Protocols for networking, wi-Fi routers,OBD diagnosis with CAN bus protocols, Electrical vehicles and AC drives, stepper motor controls. I designed sine wave inverters for standalone and grid tie Inverters. I designed projects like Off line UPS up to 3 KVA, 5kW motor controller for electrical vehicles ,synchronous rectifiers, Solar MPPT chargers, Solar trackers, Battery chargers ,Grid tie inverters design with PLL and feedback control circuit emergency light of 66W and Online UPS control cards, Battery Charging power supplies, LED drivers for PWM controlling and dimming, SMPS, Power supplies. I have experience in schematics and PCB design experience in Altium and ORCAD. I am ready to work for you. Please contact for further discussion.
$4.000 USD em 60 dias
4,9 (59 avaliações)
6,8
6,8
Avatar do Usuário
Respected Employer! Pleased to see the job posting I have reviewed the details that you provided and have also worked on similar kind of projects. I have a good experience and skills in the C Programming Microcontroller Electrical Engineering PCB Layout Arduino Please give me a chance to provide you my good services. I can send you samples as well as some of my previous work. Please you can also checkout my portfolio. https://www.freelancer.com/u/doggar302?page=portfolio&w=f Chat for furtherdetails! Thank u!
$1.000 USD em 12 dias
5,0 (16 avaliações)
5,4
5,4
Avatar do Usuário
Dear Client. I have just read your job description and your project is really interesting to me. I have many experiences working for 7+ years with Circuit design, PCB design, manufacturing functional prototyping with firmware programming and testing especially. Here are some of the experiences that I built ago. - Schematic and PCB design and Layout using Altium Designer, Eagle, KiCAD, OrCAD. - high-speed, flexible, Multi-Layer PCB design. - DDR, POE, motor control, power converter, UART, SPI, I2C, RF, BLE design - ARM, DSP, MCUs, Arduino, Raspberry pi experiences. I am sure I can complete it on time with high quality. If you hire me, I can start to work for your job immediately. I'll do my best for you. Thank you for your time. Best regards.
$1.125 USD em 7 dias
5,0 (21 avaliações)
5,3
5,3
Avatar do Usuário
Hi, I am an Electrical, Electronics and Embedded Engineer. A PCB Designer, Arduino/Raspberry Pi, ESP32, ESP8266 and internet of things expert. I read through the job description very carefully and I am absolutely sure that I can do the project very well. I have worked on similar projects to what you are looking for, and I am confident I can exceed your expectations. I can achieve the results that you are asking for.I can complete your project on time and within your budget. Thanks
$750 USD em 7 dias
4,6 (14 avaliações)
4,2
4,2
Avatar do Usuário
I will do:- Simple to advanced Circuit design and analysis using software tools such as KiCAD, Proteus, Altium Designer, Allegro, PADs, and Eagle My package provides the following services - Schematic drawings - Gerber files - Netlist generation - Pcb's - BOM generation (Professional BOM) - 3D Models of the Actual PCB - ECAD Library Administration I will also generate Gerbers on existing PCBs files
$1.667 USD em 30 dias
4,7 (18 avaliações)
4,3
4,3
Avatar do Usuário
Hi, I have gone through your requirements " PoE PSE controller with diisplay " and having experience in similar work, I can very well assist you from start to end till your satisfaction. We have Excellent experience working with SEO friendly, Mobile Responsive Websites and have worked on more than 500 websites so far.. 1)We have experienced full-stack developers working with Joomla, Word press, Shopify, big commerce, Prestashop, Wix, and many other platforms. 2) We have knowledge of HTML5, CSS3, jQuery, Angularjs2, PHP,etc.. -- Based on our expertise and long term experience, we can guarantee an extraordinary result within the anticipating time. Further, we request you to provide any specific features/functionalities in your mind (if any)so that based on your feedback, we could draft the detailed proposal and discuss each and every aspect of the project. - We understand confidentiality and its important for you, we will be happy to sign NDA for your project. Also I do have few queries: - Could you please share the complete requirements for better understanding of the exact features and functionalities? - Do you have any reference app /website for the look n functionality? - What is your estimated budget and timeline for the project? We have done similar work and have experties in multiple related technologies. However, due to confidentiality we cannot share those details in public domain. We'd love to showcase our work when we initiate conversation. I would like to discuss more about project your project so we can have clear understanding of project and its requirements. Looking forward to hear from you. Best Regards, Tapan S.
$1.209 USD em 7 dias
0,0 (0 avaliações)
0,0
0,0
Avatar do Usuário
Hello Dear Buyer, I highly welcome you here, I am happy to see your request that you need Develop a smart 4 port PoE PSE controller using the Texas Instruments TPS23861 controlled by MSP430 and ESP32 micro controller with a DC-DC boost power supply. Power will be provided from an external 20 - 24V DC power supply that will need to be converted to the 54V DC for PoE standards. Reference code for MSP430 is available from TI. Would like to use ESP32 for wireless communications and web page host for configuration and reporting. Also, would like to monitor network information, IP address, channel status, and channel power from MSP430 to ESP32 and show on display.I am capable of this and i can do the job for you perfectly
$750 USD em 10 dias
0,0 (0 avaliações)
0,0
0,0
Avatar do Usuário
I Have 5+ years of experience with Circuit/layout design. Can help you with complete product development including programming and manufacturing details.
$1.125 USD em 6 dias
0,0 (0 avaliações)
0,0
0,0

Sobre o cliente

Bandeira do(a) UNITED STATES
Coraopolis, United States
5,0
1
Método de pagamento verificado
Membro desde jan. 10, 2006

Verificação do Cliente

Obrigado! Te enviamos um link por e-mail para que você possa reivindicar seu crédito gratuito.
Algo deu errado ao enviar seu e-mail. Por favor, tente novamente.
Usuários Registrados Total de Trabalhos Publicados
Freelancer ® is a registered Trademark of Freelancer Technology Pty Limited (ACN 142 189 759)
Copyright © 2024 Freelancer Technology Pty Limited (ACN 142 189 759)
Carregando pré-visualização
Permissão concedida para Geolocalização.
Sua sessão expirou e você foi desconectado. Por favor, faça login novamente.