Vehicle datalogger using labview, arduino and robotic sensors - repost

Encerrado Postado Nov 12, 2013 Pago na entrega
Encerrado Pago na entrega

This project relates to a data logger for a hybrid drive test vehicle. It is an automotive (truck or car) “on the road” data logger project using a pc (laptop), labview, arduino and arduino shields and readily available robotic boards only.

The project will be divided into 4 phases and will be paid as such. The deliverables are the labview VI’s, connection diagrams and the arduino sketches. The project can be done with most of the coding on the arduino using projects listed per section and just the results sent to labview but preference will be given to a project that programs the arduino FROM the labview VI

The key evaluation points are: 1) labview plus 2) arduino mega and 3)standard shields pololu or adafruit or sparkfun but preference will be for shields from [login to view URL] ( The local distributor in my country)

The design is not limited to a single arduino unit, but there may be speed and timing issues, but then the communications between the boards must be included in the project

Phase 1:Basic vehicle tractive forces and speeds Measure three shafts speeds, vehicle IMU data and sned to data card and display on labview in real time

a) There are three shafts (-6000 to +6000rpm), we need to direction and speed. The suggested method is quadrature encoders, but open to suggestions. Suggested method measure rpm speed and direction of 3 shafts. 3 quadrature encoders as per LIFA. [login to view URL] And probably https://decibel,[login to view URL]

b) Record vehicle IMU data . a example is [login to view URL]://arduinodev.com/vehicle-telemetry-platform/&sa=U&ei=7vJ_Us_JNMqo0wWquICwDg&ved=0CCgQFjAC&sig2=tr9FGM82Tz66faKhQuQMOg&usg=AFQjCNEcLDOizP0nv7vcNrKRGkg4y-NwnQ. And another example is at [login to view URL] It is only required to show in realtime the vehicles readouts from the IMU unit. The plotting and link to google maps must be demonstrated

c) all data to be logged at least at 5 hz, preferably 10hz write shaft speeds, shaft direction and all IMU to csv file on arduino shield but ALSO display all the speeds ( gauges and numeric suggested ) and all IMU data ( bar graphs and numeric suggested in labview in realtime)

Phase 2: measure other devices:

d) add 10 analog 0-10v signals

e) add 10 digital signals

f) add accurate timing of the fuel inject operation time. This will require a highly accurate timing library to measure the time of operation of fuel injectors. It could be a voltage or a current based system, but a hall effect system is preferred to avoid braking into the vehicles wiring. htttp://[login to view URL]://www.freetronics.com/blogs/news/6500147-improved-arduino-timer-library&sa=U&ei=cwKAUquoIcnL0AWZ0ICgDw&ved=0CFAQFjAJ&sig2=vjOXCiNQIPIeIv9WxNrhFg&usg=AFQjCNF79brN3JSAAopvE79UqLaT7SfAAQ

g) add a real time clock to the system

Phase 3 independent reading of the OBD11 bus capability and CAN bus

There are many standard arduino projects. One must be added to the data logging system. There are many can bus implementations, one must be added to the system

Phase 4 touch screen display for in vechicle graphics

A 4dsystems touch screen display must be added into the system for real time display of selected vehicle parameters

Design Gráfico HTML LabVIEW PHP Design de Sites

ID do Projeto: #5122786

Sobre o projeto

5 propostas Projeto remoto Ativo em Dec 19, 2013

5 freelancers estão ofertando em média ₹133261 nesse trabalho

siddharth0311

Already given the details in application to the previous post and discussed the working with the client.

₹138888 INR in 30 dias
(0 Comentários)
0.0