Create DFX Sign File

@sparkingdesigns

Having worked in graphic design and sign-making for over a decade, I have unparalleled expertise when it comes to DFX files, typography as well as the creation of signs. My familiarity with serif fonts and my knack for detail ensure that your sign will be exactly how you envisioned it. I am well skilled in Adobe suite, majorly Illustrator and therefore making holes in your sign installation won't be an issue. In addition to my experience adobe suite programming, I am also proficient in using Word, Excel, Powerpoint etc. Which guarantees organized process. On-time and budgeted delivery is one of my many specialities and this project though large measuring 13ft doesn't intimidate me. It is a most sought after quality as you can get all your work done just sitting at the same place from. Also, which adds on to this conversation is that availability at any points when you need (24X7) I take pride in consistently exceeding client expectations and ensuring their absolute satisfaction before any funds are released whichare some of many reasons clients choose me time and time again. I look forward to bringing your vision to life with extreme precision and creativity

@CreativeDesign50

Hello, I can create a clean DFX sign file for your 13’ wide layout with the 14 uppercase letters in Times Roman Bold, set to the specified heights, and include the (2) 1/4” installation holes exactly where needed. I’ll prepare the artwork with accurate spacing, proper alignment, and a production-ready layout for sign fabrication. I’ll build the file carefully in vector format, check all letter proportions and dimensions, and make sure it’s ready for cutting or plotting without extra cleanup. If needed, I can also provide a matching editable source file alongside the final DFX. Please have a look at our Freelancer portfolio through the links given below. https://www.freelancer.com/u/CreativeDesign50 Best regards Kirandeep K.

@SidCoGraphics

Hi Alan, I understand you're looking for a precise DFX file for your sign, and I'm confident I can deliver exactly what you need. With my proficiency in graphic design and Adobe Illustrator, I can ensure that the 14 uppercase letters in Times Roman Bold will be perfectly formatted to meet your specifications. Additionally, I’ll incorporate the required dimensions of 13’ wide and ensure the 10” and 8” height adjustments are accurately made for optimal visibility. I'll aim to provide a draft for your review by the end of the week. What specific features do you envision for the sign beyond the text and dimensions? Thanks,

@estefaniarr0412

Hi there! I see you're looking for a dfx file with specific measurements and font details. My first step will be to set up the design using Times Roman Bold to ensure it perfectly fits your 13' wide sign. I'm available immediately for a fast and clean delivery. Let's create something great together! Feel free to message me! ✅

@rsinfotechindia

Hi there! I can help you create a precise, production-ready DXF file for your sign layout based on your exact dimensions and typography specifications. With over 10 years of professional experience in 2D drafting, CAD modeling, and vector typography using AutoCAD, SolidWorks, and Adobe Illustrator, I specialize in generating clean, fully closed vector paths optimized for CNC router, plasma, and laser cutting. I will accurately draft the 14 uppercase letters in Times New Roman Bold ("ALAN NISHIO" at 10" tall and "BLDG." at 8" tall), scaled precisely to your total 13-foot width layout, and position the two 1/4" mounting holes according to your installation requirements. I'll deliver clean DXF/DWG vector source files along with a dimensioned PDF proof for verification before fabrication. Should the 1/4" installation holes be centered based on standard placement, or do you have specific edge offset distances in mind? I am ready to get started right away! Thanks

@sadian4

As an experienced and versatile Graphic Designer with strong proficiency in Adobe Illustrator and AutoCAD, I can assure you of my ability to create the dfx file you need for your sign. Over the past decade, I've honed my skills by crafting visually stunning designs, which aligns perfectly with what you're looking for in this project. Not only do I specialize in typography and layout, but I've also worked on various signage designs that required precise execution. Moreover, my extensive experience with two-dimensional drafting will ensure that I create a precise file with accurate dimensions and measurements for the 13' wide sign. I understand the importance of font choice in conveying a message effectively and would use my skills to flawlessly incorporate your requested Times Roman Bold serif font. Please take a moment to explore my portfolio: https://www.freelancer.com/u/sadian4 If my style and expertise align with your vision, I’d love to discuss how I can bring your project to life. Let’s connect — budget and deadline can be finalized during our chat. Best regards, Sadia

@romilbhagat89

As a Creative Graphic Designer and professional proficient in Adobe Illustrator, AutoCAD, and Photoshop, I have the perfect skill set to create the DFX file you need for your sign project. I have demonstrated experience in typography and sign design, with a deep understanding of serif fonts like Times Roman Bold. My designs combine creativity with an attentive eye to detail, which is crucial for creating technical files like the DFX. Furthermore, I am adept at working within specified dimensions and requirements for signs, as evidenced by my portfolio of work that includes branding and marketing creatives, as well as print design. This means that not only can I create the DFX to realize your precise specifications of 13’ wide with 14 uppercase letters (10” tall for ALAN NISHIO and 8” tall for BLDG), but I can also ensure it's optimized for your intended installation with the necessary (2) 1/4'' holes. Professionalism, quick turnaround time, clear communication, and client satisfaction are at the core of my work ethic - all traits I know are valued when transforming ideas into impactful visuals. With me on board, you'll get a polished, modern, and memorable sign in no time. Let’s collaborate and create something truly exceptional for your brand!

@worldarcpart

Hello; We are interested in your Create DFX Sign File project. We are a professional team of expert architects from all over the world. Our team offers the highest quality and most effective projects with over 14 years of experience and works with a focus on 100% customer satisfaction. When you choose us, you will have a final delivery that exceeds your expectations. We look forward to working with you! Take a look at our past work on our portfolio: https://www.freelancer.com/u/worldarcpart Kind Regards WORLD ARCHITECTURE PARTNERS

@nenelilly

With over a decade of experience, I, Kennedy Page, am your go-to designer for this project. I understand that you need a dfx file for your sign, featuring 14 uppercase letters in the specific Times Roman Bold serif font, along with two 1/4" holes for installation. This requires someone well-versed in creating dfx files and font manipulation. Look no further! I possess the proficiency in doing so. The size specifications are essential here and as a designer, attention to detail is ingrained into my creative process. Not only can I create the sign to be a total of 13' wide, but I can also ensure that your two texts "ALAN NISHIO" and "BLDG." are ten inches tall and eight inches tall respectively. My skills extend beyond just creating the files; I cover everything from concept to production to meet your signage needs. Portfolio: https://www.freelancer.com/u/nenelilly Budget and timeline will be discussed based on the final requirements. Best regards, Kennedy

@Shahturk83

Hi, I can create a clean, fabrication-ready DXF for your 13' wide sign using bold Times Roman serif lettering, with ALAN NISHIO at 10", BLDG. at 8", and two accurately placed 1/4" installation holes. I’ll ensure the lettering is converted to clean vector outlines and the file is properly scaled for production. Do you have a required spacing between the two text lines? Where should the two mounting holes be positioned? I can share relevant vector/sign samples before funding and start immediately. Thanks and Regards, Shahzad.

@jetjamsllc

Hi, I’m Ben Jackson from Jetjams Technologies. We can create a precise, production-ready DXF file for your sign, following your exact dimensions and specifications. What we can provide: * ? 14 uppercase letters in Times Roman Bold serif font * ? Overall sign width: 13 feet * ? “ALAN NISHIO” at 10” tall * ? “BLDG.” at 8” tall * ? Two 1/4” installation holes positioned accurately * ? Clean, properly scaled DXF file ready for fabrication/CNC * ✅ Careful attention to spacing, alignment, and typography * ? Revisions to ensure everything matches your requirements Best reasonable price: $120 We are so much grateful for the opportunity to serve you and deliver an accurate, fabrication-ready file. Best regards, Ben Jackson Jetjams Technologies

@PentaClick7346

Good day, As a senior graphic designer, I am confident in creating the DFX sign file with 14 uppercase letters in Times Roman Bold serif font. I have extensive experience in typography and sign design, ensuring 100% job satisfaction. Let's chat to discuss further and I will share my related portfolio. My simple working process includes planning, creating, reviewing, and finalizing the design. What I will do: - Create a DFX file with 14 uppercase letters in Times Roman Bold serif font - Include (2) 1/4” holes for installation - Design the sign to be 13’ wide with "ALAN NISHIO" at 10” tall and "BLDG." at 8” tall High-quality work guaranteed within your requirements. Let's chat again soon. Regards, Hira Khan

@GridsmithLTD

Hello, The key challenge is preparing the sign lettering accurately at the required overall dimensions while keeping the Times Roman Bold geometry clean for fabrication. I can create the DFX file with the 14 uppercase letters, specified heights, and two 1/4 inch installation holes. I’ll ensure the layout is precise and the file is properly prepared for your sign fabrication process. Could you please confirm the exact spacing or reference layout for “ALAN NISHIO” and “BLDG.”?

@dilshad56

Hi, I can create a precise DXF file for your sign featuring the 14 uppercase letters in Times Roman Bold serif font, incorporating the two 1/4” installation holes exactly as specified. I will ensure the overall width is 13’ with the "ALAN NISHIO" text at 10” tall and "BLDG." at 8” tall as requested. To accomplish this, I'll use Adobe Illustrator to set the typography correctly, then export the design to DXF format suitable for CNC or other sign fabrication processes. I'll carefully position the mounting holes and maintain correct scale and proportions. This workflow guarantees accuracy in the layout and file compatibility for your sign production. Once I receive any additional details such as the exact spacing between text lines or the preferred placement of the holes if other than centered, I'll finalize and provide you the DXF file ready for use. Please confirm any preferences or constraints you have for the installation holes or design.

@DesignMaze

I can prepare the sign artwork at the exact 13 ft overall width, with ALAN NISHIO at 10 in, BLDG. at 8 in, and the two 1/4 in installation holes positioned cleanly for fabrication. I’d build the lettering as true vector outlines in Times Roman Bold, verify spacing and overall dimensions, then clean the paths so there are no overlaps, open nodes, or duplicate lines that could cause cutting issues. I’d also check the final geometry at full scale before exporting the DXF. You can review my work here: https://www.freelancer.pk/u/DesignMaze Please send the preferred hole locations or fabrication template if you have one, and I can match it exactly. Best, Sam

@graphicdesigne56

Hi, I can create the DXF-ready sign artwork precisely to your specifications, including the Times Roman Bold lettering, correct sizing, overall 13' width, and two 1/4" installation holes positioned appropriately for fabrication. I’m experienced with vector artwork and production-ready files, and I’ll ensure the geometry is clean, scalable, and suitable for CNC/sign fabrication. I can provide the final DXF file with accurate dimensions and verify the layout before delivery.

@ShahzaibxArt

As an experienced graphic designer fluent in using Adobe Illustrator, I specialize in creating precise dfx files just like what you're looking for. Typographic design, especially with fonts like Times Roman Bold serif, is my forte, and I will ensure your sign has a professional and visually appealing layout. Having dabbled in various forms of graphic design, signage has always been one of my favorites since it demands both creativity and precision. In line with your requirements, I am well-versed in integrating elements such as hole placements for installation and dimensions ratio for conformance. Equally important, I understand the necessity of efficient communication for a project like this. So, expect updates at every stage of the job to ensure the final output is exactly what you envisioned. Finally, a successful project completion hinges on respect for timely delivery. You can trust me to get this job done well within of your defined time frame - no long, drawn-out delivery schedules. Let's move forward together to actualize your vision into a stunning and functional dfx sign file.

@hamza1749

THE SIGN FILE NEEDS TO BE SHOP-READY, NOT JUST VISUALLY CORRECT. Hi, I can create the DXF file for your sign with accurate lettering, proportions, hole placement, and overall dimensions ready for fabrication. I’ll set up: • Times Roman Bold serif lettering • “ALAN NISHIO” at 10” tall • “BLDG.” at 8” tall • 13’ total overall width • Two 1/4” installation holes • Clean vector geometry suitable for CNC/laser/plasma fabrication • Correct scaling and spacing throughout the layout I’ll also check that the lettering is properly converted to outlines/paths so there are no font-dependency issues when the file is opened by your fabricator. I can deliver the final DXF in the required units and make sure the geometry is clean and fabrication-ready. Regards, Hamza

@Yoshida57

Hi, I can create the DFX sign file for this layout exactly as described. I’ll set up the 13' wide sign with the 14 uppercase letters in Times Roman Bold serif, and include the two 1/4" installation holes in the correct positions. I’ll match the dimensional callouts for ALAN NISHIO at 10" tall and BLDG. at 8" tall, and use the attached images to align the design accurately. I’ll prepare a clean, production-ready file for fabrication and install use. Best, Kanae