Synchronous Reluctance Motor (SynRM) — ANSYS Electromagnetic Simulation, Comparison & Optimisation for E-Bike

@LiveExperts

Hello, As an electrical engineering specialist at Live Experts, I have the skills and experience to deliver the electromagnetic simulation you need for your e-bike project. With a strong background in ANSYS Maxwell 2D simulation software, I can expertly design and analyze various SynRM baseline configurations, demonstrating virtuosic skills in model creation including materials selection, meshing, boundary conditions setting, and excitations that take into account all relevant aspects such as saturation and slot-leakage effects to provide you with accurate performance results. At Live Experts, being solution-oriented is our key driver. I will apply this mindset in the second phase of the project where I'll propose an optimized SynRM design-building on Phase 1's findings and your given specs- that outperforms the baseline designs quantitatively. My ability to explore key parameters such as flux barrier geometry, air gap, d/q current angle stator/rotor dimensions for enhancing crucial performance stipulations such as torque ripples, Ld/Lq ratios and efficiency estimates has yielded great results for my clients. Delivering more than just the project files, I will provide you with a comprehensive PDF report interspersed with modeling assumptions, solver settings, design rationales, and most importantly- key conclusions. I am confident that my meticulousness and integrity matched by my expertise make me uniquely suited to take on this p Thanks!

@Is88

I am an experienced engineer specializing in ANSYS simulations, offering advanced computational modeling and analysis services to support design validation, optimization, and failure prevention. Using ANSYS Workbench, Mechanical, and Fluent, I can deliver accurate results through structural, thermal, and fluid flow studies, vibration analysis, and failure prediction. Specialized in; 1) 3D model setup and meshing in ANSYS 2) Static structural and thermal analysis 3) CFD simulation for fluid flow and heat transfer 4) Modal and harmonic vibration analysis 5) Fatigue and failure evaluation 6) Optimization and design improvement recommendations 7) Comprehensive technical report with results and conclusions

@hayat38402

Hi, how are you doing? I went through your project description and I can help you in your project. your project requirements perfectly match my expertise. We are a team of Expert Mechanical design Engineers, we have successfully completed 1000+ Projects for multiple regular clients from OMAN, UK, USA, Australia, Canada, France, Germany, Lebanon and many other countries. We are providing our services in following areas:  Product Design | 3D CAD Modelling  FEA | CFD  Thermal analysis | Structural analysis  HVAC and Heat load calculation We are proficient in using following software’s:  AUTOCAD  SOLIDWORKS  ABAQUS  ANSYS APDL | ANSYS Fluent  MATLAB | SIMULINK  COMSOL Multiphysics  FUSION360 | CATIA We have good command over REPORT WRITING, we can show you many samples of our previous reports. We can discuss further details in the message box.

@Feriver

Hello, I can develop a full ANSYS Maxwell 2D electromagnetic simulation workflow for your Synchronous Reluctance Motor (SynRM) targeted at e-bike applications, including both baseline and optimized design iterations with clear performance comparison. My approach will begin with proposing one or more manufacturable SynRM baseline topologies suitable for 36V/48V, 250–1500W operation. I will build complete Maxwell 2D models including material definitions, meshing strategy, boundary conditions, and transient + magnetostatic setups to accurately capture saturation, slot leakage, and torque ripple behavior. In Phase 2, I will optimize the rotor/stator geometry (flux barriers, air-gap, d/q current angle, and key dimensional parameters) and run parametric sweeps to maximize torque density and efficiency while minimizing ripple. The result will clearly demonstrate quantified performance improvement over the baseline design. Deliverables will include fully configured ANSYS Maxwell project files, a structured comparison dataset (torque, ripple, Ld/Lq, flux density, efficiency estimates), visualization plots, and a concise technical report explaining assumptions, solver setup, and design conclusions. Thanks, Asif

@shadabkhan92

As an Electrical Engineer and Electronics expert with a passion for designing and optimizing efficient systems, I am thrilled about the prospect of utilizing my skills in ANSYS Maxwell 2D to simulate, compare, and optimize the Synchronous Reluctance Motor (SynRM) for your e-bike project. I offer a unique blend of proficiency across multiple areas that can be incredibly valuable for this job. Throughout my career, I've showcased a deep understanding of electromagnetic simulations using ANSYS Maxwell 2D. I am confident in my ability to effectively model key parameters such as flux barrier geometry, air gap, d/q current angle, stator/rotor dimensions to extract meaningful performance results from the simulations. Additionally, my expertise in real-world manufacturing processes ensures that all designs I produce will be manufacturable and compatible with e-bike systems. Notably, my versatility in deploying AI on edge devices, implementing Odoo ERP systems, and comprehending intricate hardware-logics significantly enhance my capacity to build AI-based solutions that interface efficiently with physical systems. This transferable skillset makes me an invaluable asset for projects like yours which integrate AI and hardware within production infrastructure. Let's work together to create an optimized motor design that not only boosts performance but also meets all y

@electronicsdone

Best SynRM Electromagnetic Simulation Expert for E-Bike Motor Optimisation! ⭐⭐⭐⭐⭐ Dear Client, The biggest risk in this project is not building a Maxwell model. It is producing simulations that look convincing on paper but do not translate into a manufacturable motor with real torque improvement, acceptable ripple, and believable performance in the e-bike power range. That is where careful modelling matters. I would approach this by: 1. building one or more credible baseline SynRM configurations in ANSYS Maxwell 2D with proper material, mesh, excitation, and saturation-aware setup 2. extracting the parameters that actually matter for comparison — torque, ripple, flux density peaks, Ld/Lq behaviour, and efficiency-related trends 3. optimising the motor around the right geometric and excitation variables so the final design shows clear, quantified improvement without drifting into unrealistic geometry This keeps the work focused on a result that is not just simulation-complete, but engineering-useful and defendable for a real e-bike motor direction. Two quick questions: 1. Do you already have a preferred stator slot / pole combination, or should that be part of the baseline selection? 2. Is lower torque ripple or higher average torque the stronger priority for the optimised design? If you message me, I can outline the cleanest baseline-to-optimisation workflow so the final comparison is strong, practical, and easy to review. Best regards, Prat PCB Must Innovations

@Zawiya3

I’m proposing a focused partnership with Axyos AI to strengthen and execute your European market entry strategy with precision. My role is to bridge the gap between your proven success in the Americas and the unique cultural, operational, and behavioral dynamics of European service businesses. Using your existing sales playbook as a foundation, I will identify high-impact, region-specific pain points—such as labor shortages, shifting customer expectations, and varying levels of digital adoption—and position your WhatsApp automation as a practical, scalable solution for clinics and gyms aiming to grow without increasing overhead. My approach centers on consultative, high-integrity closing. Rather than simply selling a product, I present a compelling shift in how businesses operate—clearly demonstrating the ROI and efficiency gains that justify the $1,600 to $2,100 setup investment. . The objective isn’t just to close deals, but to build long-term partnerships with clients who immediately recognize the value of your automation, supporting sustainable and scalable expansion across Europe.

@ssumitkumar7800

With extensive experience in electrical engineering and electronics, I bring a unique perspective to your project of simulating and optimizing a Synchronous Reluctance Motor (SynRM) for e-bike use. While my background might not directly align with ANSYS Maxwell 2D, I am adept at quickly learning and mastering new software, as evidenced by my versatility in other programs like PCB, Cadence Virtuoso, and Altium Designer. My thorough understanding of electromagnetics combined with ANSYS Maxwell familiarization will be invaluable in performing magnetostatic and transient EM solves accurately, ensuring that saturation and slot-leakage effects are precisely captured for comprehensive comparison and optimization exercises. Real-world compatibility is imperative in designs targeted at the e-bike industry, and my wide-ranging experience includes ensuring manufacturability while keeping performance quality intact.

@Robertx2002

You need a SynRM simulation that isn’t just theoretical but delivers manufacturable, performance-driven results in ANSYS Maxwell 2D. The real challenge is turning complex electromagnetic phenomena into actionable design insights that boost e-bike motor efficiency and torque without compromising real-world viability. I will establish a baseline SynRM design tailored for 36 V or 48 V e-bike applications, setting up materials, mesh, boundary conditions, and conducting magnetostatic and transient solves that capture saturation and slot-leakage precisely. Then, I will optimize flux barrier geometry, air gap, and current angles through parametric sweeps to produce a design demonstrably superior in torque ripple, efficiency, and flux distribution—all validated by warning-free meshes and backed by detailed performance comparisons. Which specific e-bike operating conditions or design constraints should I prioritize to align the optimization with your product goals?

@livedesign07

Note: I assure timely completion of the project at a competitive cost with accurate and reliable results. I have strong expertise in electromagnetic simulation using ANSYS Maxwell 2D. I have reviewed the project description and fully understand your requirement for electromagnetic simulation of a synchronous reluctance motor (SynRM) for e-bike applications using ANSYS Maxwell 2D. With 15.5 years of experience in electromagnetic and multiphysics simulation, I am confident in delivering high-quality and precise results. I have performed three-phase induction motor electromagnetic analysis using ANSYS Maxwell and COMSOL Multiphysics, including modelling of stator and rotor geometry, material assignment, winding configuration, meshing, and performance evaluation. I have strong experience in motor electromagnetic analysis, including flux distribution, torque calculation, back-EMF analysis, inductance calculation, torque ripple analysis, and efficiency evaluation of electrical machines. ⭐ Design & Simulation Software Expertise: ✔️ ANSYS Maxwell ✔️ COMSOL Multiphysics ✔️ ANSYS Fluent ✔️ ANSYS CFX ✔️ SolidWorks ✔️ CATIA ✔️ Abaqus I assure you that the final results will meet your expectations with high accuracy and engineering reliability. ❀ Dr. Ramesh R ❀

@adily1

Hey , I just finished reading the job description and I see you are looking for someone experienced in Ansys, Engineering, Electrical Engineering, Electronics and Simulation. This is something I can do. Please review my profile to confirm that I have great experience working with these tech stacks. While I have few questions: 1. These are all the requirements? If not, Please share more detailed requirements. 2. Do you currently have anything done for the job or it has to be done from scratch? 3. What is the timeline to get this done? Why Choose Me? 1. I have done more than 250 major projects. 2. I have not received a single bad feedback since the last 5-6 years. 3. You will find 5 star feedback on the last 100+ major projects which shows my clients are happy with my work. Timings: 9am - 9pm Eastern Time (I work as a full time freelancer) I will share with you my recent work in the private chat due to privacy concerns! Please start the chat to discuss it further. Regards, Adil.

@haseebsidd07

Hey , I just went through the project description, and I see you are looking for someone experienced in Ansys, Engineering, Electronics, Simulation and Electrical Engineering. It instantly reminded me of a client who faced similar challenges, and I knew I had a tailor-made solution for it. Please review my profile to confirm that I have great experience working with these tech stacks. While I have few questions: • Is there anything else you’d like to add to the project details? • What’s the top hurdle you’re facing with this project? • What is the timeline to get this done? Why Choose Me? 250+ Projects. 5 Years. Zero Misses. My reputation is built on a single metric: Flawless Execution. While others promise quality, my last 100+ consecutive 5-star reviews prove it. I don’t just finish the job; I set the standard. Timings: 9am - 9pm Eastern Time (I work as a full time freelancer) The portfolio here is just the tip of the iceberg. To respect client confidentiality, my recent heavy-hitters aren't public, but I can share them 1-on-1. Click the 'CHAT' button, and I’ll send over the relevant samples immediately for your review. Regards, Abdul Haseeb Siddiqui.

@hayleyc27

I am an experienced electrical design and simulation engineer specializing in electromagnetic analysis of advanced motor systems, including Synchronous Reluctance Motors (SynRM) for electric mobility applications. Using industry-leading tools such as ANSYS Maxwell and ANSYS Motor-CAD, I develop high-fidelity models to analyze torque performance, efficiency, losses, and thermal behavior. For your e-bike application, I will conduct detailed simulations to evaluate different rotor geometries, stator configurations, and material selections, ensuring optimal performance under real-world operating conditions. In addition to simulation, I provide comprehensive comparison and optimization studies to identify the best-performing design based on efficiency, weight, cost, and manufacturability. I will deliver clear reports with performance curves, efficiency maps, and design recommendations tailored to your project goals. With a strong focus on iterative improvement and practical implementation, I ensure that the final SynRM design is not only theoretically optimized but also ready for prototyping and integration into your e-bike system.

@talhab12

I can execute your complete Synchronous Reluctance Motor simulation in ANSYS Maxwell 2D, starting with a manufacturable baseline and developing an optimized topology for your 250W to 1500W electric bike application. I will configure the magnetostatic and transient solves to accurately capture saturation and slot leakage, running parameter sweeps on flux barriers and current angles to clearly demonstrate maximized torque and minimized torque ripple. As an Electrical Engineer with extensive experience in computational electromagnetics, I will ensure all mesh operations are warning free and results are physically plausible. I will deliver the fully configured Maxwell project files, all required flux and torque plots, a comprehensive comparison table, and a detailed PDF report outlining the modeling rationale. Do you have a specific maximum outer diameter or stack length constraint for the motor housing that I need to strictly follow for the optimization phase? Let us connect to finalize the baseline topology. Best regards, Muhammad T.

@cadenv2

How will your SynRM look after saturation and slot-leakage are accounted for in ANSYS Maxwell 2D—especially for a 36/48V e-bike motor that must be manufacturable and real-world compatible? I’ll build at least one e-bike-suitable baseline SynRM, then optimise it via parameter sweeps to prove measurable performance gains. Phase 1: In Maxwell 2D I’ll configure materials, mesh, boundary conditions and excitations; run magnetostatic + transient solves to capture saturation, leakage, and torque production. Results: torque vs electrical angle, flux density maps, current density maps, and extracted Ld/Lq, flux peak values. Phase 2: Using Phase 1 insights, I’ll iterate flux-barrier geometry, air gap, d/q current angle, and key stator/rotor dimensions, aiming for clear quantified improvements (torque, ripple reduction, efficiency estimate) over the baseline. You’ll receive Maxwell project files, comparison table, plots per design, and a short PDF report with solver settings and assumptions. Send your preferred target RPM/torque and constraints—I’ll confirm the baseline topology and start.

@ahmirc

I will deliver complete ANSYS Maxwell 2D electromagnetic simulations for an e-bike Synchronous Reluctance Motor (SynRM), including baseline(s), an optimized redesign, and a quantified performance comparison. You’ll receive configured .aedb/.mxf files plus a concise PDF report within 10–14 days. Phase 1: I’ll propose 1–2 manufacturable baseline rotor/stator topologies for 36V/48V and ~250W–1500W classes. In Maxwell 2D I’ll set materials, perform mesh controls (slot leakage & saturation capable), apply boundary conditions/excitations, and run magnetostatic + transient solves across relevant electrical angles to extract torque, torque ripple, Ld/Lq, flux density peaks, and efficiency estimates. Phase 2: Using Phase 1 findings, I’ll optimize flux-barrier geometry, air gap, d/q current angle, and key rotor/stator dimensions. I’ll run parameter sweeps and produce plots: torque vs electrical angle, flux maps, and current density maps, plus a comparison table showing clear improvement over baseline(s).

@greyk3

I’ll deliver complete ANSYS Maxwell 2D electromagnetic models for a SynRM e‑bike drive—baseline + optimized—plus a quantitative comparison package within 12 days. You’ll receive fully configured .mx2d projects, torque/flux plots, and a short PDF report with solver settings and conclusions. Phase 1 (Days 1–6): I’ll propose 2 manufacturable SynRM baselines for 36/48 V class (~250 W–1500 W), set up materials, geometry for rotor flux barriers, mesh strategy, boundary conditions, and excitation/current-angle mapping. Magnetostatic + transient solves will capture saturation and slot leakage, then I’ll extract torque vs electrical angle, Ld/Lq, peak flux density, and current density maps. Phase 2 (Days 7–12): Using Phase 1 results, I’ll run a guided parameter sweep (flux barrier geometry, air gap, d/q current angle, key stator/rotor dimensions) to produce an optimized rotor/stator pair with clear measured gains (torque and ripple reduction, improved efficiency estimate). Next step: share any target dimensions (or constraints like outer diameter, stack length) and desired speed/drive profile, and I’ll confirm the baseline count + schedule your first model build.

@saintj7

When your SynRM e-bike motor model is done right in ANSYS Maxwell 2D, you’ll stop guessing: you’ll see saturated torque, slot-leakage behavior, and quantified improvements before any hardware build. I’ll build a fully configured 2D electromagnetic workflow for a manufacturable baseline (36V/48V, ~250W–1500W class), then iterate to an optimized rotor/stator geometry. Phase 1: propose 1–2 e-bike-suitable baseline SynRM topologies, define materials, mesh (mesh warning-free), boundaries, and excitations. Run magnetostatic and transient solves capturing saturation and leakage; extract torque vs electrical angle, flux density peak levels, Ld/Lq, and efficiency estimates. Phase 2: optimize based on findings via parameter sweeps (flux barrier geometry, air gap, d/q current angle, key dimensions). Deliver a comparison table (torque, torque ripple, flux peaks, Ld/Lq, η est), maps (B-field and current density), plus torque plots per design. You’ll receive Maxwell project files, plus a short PDF with assumptions, solver settings, and conclusions. Share your target pole count and stack dimensions, and I’ll start the baseline setup immediately.

@johna220

SynRM performance is often won (or lost) in the “hidden” flux-barrier and air-gap details—small geometry changes can swing torque ripple more than control tweaks. With your 36–48 V e-bike target (~250–1500 W), I’ll build a complete ANSYS Maxwell 2D 2D electromagnetic model for at least one baseline SynRM, then optimize it for quantified gains. Phase 1: define manufacturable baseline(s), assign materials, set up mesh, boundary conditions, and current excitations for magnetostatic + transient solves (including saturation and slot-leakage). Extract torque vs electrical angle, torque ripple, flux density peaks, Ld/Lq, and create flux/current density maps. Phase 2: run parameter sweeps on flux barrier geometry, air gap, d/q current angle, and key stator/rotor dimensions. Produce a comparison table with efficiency estimates and demonstrate clear improvement over baseline(s). Deliver Maxwell project files + short PDF (assumptions, solver settings, conclusions) with mesh-warning-free results. Share motor geometry constraints (or CAD/target dimensions) and your preferred performance objective, and I’ll propose the baseline topology set and begin modeling immediately.