Encerrado

Plastic Injection Molded Casing Design for new Product - Project Two

We are working on a new technical product line and require some work done on designing plastic casing parts. This plastic casing design will need to be sent to a plastic injection mold manufacturer to be able to create the plastic injection mold designs.

Throughout the design process it must be kept in mind, the cost and complexity of the plastic injection moulding process. It is not necessary to design the actual plastic injection mold though. Only the 3D design of the actual parts must be created with all necessary documents to pass on to the mold manufacturer.

The overall project is to be separated into 3 sub projects and each sub project will have two sections. This is because there are a total of 6 parts that must be designed and the two parts make up a casing. Therefore there are 3 pairs of casing parts and each pair will have a separate project. We would like one individual to take on all four projects but depending on time scale we may except more than one person to speed up the process.

To give a basic idea of the parts;

Sub Project One

There are two separate parts that must be designed in this project. They are similar but not the same. The two parts go together to make one complete shell. This shell is to be connected onto an L shaped metal plate via screws through the sides. Inside the casing will be motors, pulleys, belts and electronics. The design will have mounting pillars for a PCB and pillars on both parts to allow them to be screwed together. One major factor in this project is cost (more so than in other projects). Cost consideration must taken into account at all times during the project and any potential savings in cost through design will need to be communicated to us.

I have done a very quick model of the parts in sketch up for your reference but we will provide much more detailed specs when the project is underway. Please find the model in sketch up format below.

[url removed, login to view]

The other 3 projects are similar to Project One but require different part designs.

Basic Part design for Project Two...(This project)****************

[url removed, login to view]

Basic Part design for Project Three...

[url removed, login to view]

Please note that the 3d files provided above are just to give you an idea of the scale and basic shape of the parts. Full details will be provided on request within reason and the rest will be provided once the project is underway.

We also may accept hourly offers, but only if an accurate estimate on the time the project will take is provided.

Please note that you are only bidding on Project One. Project Two and Project Three are also available.

*********Please note there is a mistake in the description. At the very bottom of the description it says that you are bidding on project one. This is incorrect. This is Project Two. If you bid on this project you will be bidding on Project Two.*****************

For those of you who cannot view the linked sketch up files, I have added the actual files to the brief now. Hope this helps.

Please use the files uploaded to Freelancer. One of the files linked in the description is a jpg and is not relevant to this project.

Habilidades: Modelagem 3D, CAD/CAM, Fabricação de produtos, Design de Fabricação, Desenho de Produto

Ver mais: parts mold, sketch up model, sketch up 3d model, sketch 3d model, shell 3d model, screws 3d model, request 3d model, product manufacturing cost, product design of all time, product design full time, product design and manufacturing, plate 3d model, plastic 3d model, person 3d model, pcb 3d model, part time product design, pair line, on line 3d design, new product designs, new design product, metal design, metal 3d model, line manufacturing process, jpg to 3d model, i have a design but i need a manufacturer

Acerca do Empregador:
( 14 comentários ) Lenggries, Germany

ID do Projeto: #5129972

21 freelancers estão ofertando em média $426 para este trabalho

zoAnim

Hello Singularity, I am a mechanical engineer with 12 year experience in product design especially in plastic. I read all your three projects and I will be bidding in this three. Looking for assisting you on Mais

$618 USD in 15 dias
(61 Comentários)
6.5
psapiens

Ready to start!, can you send me more details? Resumed portafolio: [url removed, login to view] (NO ALL MY DESIGNS ARE INCLUDED HERE) Please check my full public profiles at: [url removed, login to view] Mais

$833 USD in 5 dias
(25 Comentários)
5.8
udayd75

Hello, iam intrested to work on all 6 parts, if you tell your budget for all 6 parts we can start immediately please look at my projects and client review please read my proposal and iwill work for this project as Mais

$368 USD in 7 dias
(36 Comentários)
5.7
avtar1073

Hello, We have studied your requirements thoroughly and these are compatible to us. , We have already done that types of many projects. As we believe in teamwork, and with our best co-ordinatng efforts We ensure yo Mais

$422 USD in 3 dias
(27 Comentários)
5.2
inderar88

Hello, Thanks for providing me an opportunity to bid on your project. REQUIREMENT UNDERSTANDING: After Reading Your Job Description, I believe that you are looking for an experienced artist. I have over 4 years Mais

$421 USD in 4 dias
(10 Comentários)
5.0
milesf01

Hi, We can help you on this. Looking forward to more details. thanks! 10+ Nike OEM Sportsball factory R&D experiences, 8+ trading, very good relationship with lots supplier, material vendor. help customer from desi Mais

$555 USD in 7 dias
(10 Comentários)
4.9
chander1980

Benchmark of quality with high speed working. I am an experienced 3D Artist & Animator. Here is my portfolio: [url removed, login to view] Here is my latest video: [url removed, login to view] Mais

$421 USD in 3 dias
(10 Comentários)
4.6
amienaeem

>>>>>>>>>>>>>>>>>>>>>. Expert here <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< >>>>>>>>>>>>>>>>>>>>>. Expert here <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< >>>>>>>>>>>>>>>>>>>>>. Expert here <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<

$250 USD in 6 dias
(6 Comentários)
4.3
Mezatio

Dear Sir I trust you are well, i am a full time freelance professional mechanical design engineer specialized in consumer product and heavy machinery design. i have work with many inventor and company before,f Mais

$250 USD em 1 dia
(1 Comentário)
3.8
mikebudd

Hello, I am a Electrical/Mechanical Designer with over 20 years of experience. I also have a Bachelors of Science in Mechanical Engineering. I have designed several enclosures similar to yours for manufacturing by in Mais

$315 USD in 5 dias
(4 Comentários)
3.2
vasilerazvan1

Hy, I work as mechanical design engineer and i have experience with 3d modeling and plastic injection for this type of product . i am the man for the job , will be done fast and at a great quailtete. Please contact me Mais

$277 USD in 7 dias
(4 Comentários)
2.9
Lesorton

Hi I am a Design Engineer with over 25 years experience in the plastic injection mould field, designing both plastic components and mould tools. I take initial sketches, ideas, etc and create 3D models photo-realism Mais

$555 USD in 5 dias
(4 Comentários)
2.8
oroborus

Hi. I'm an industrial designer with a little bit of plastic injection production experience. I'm bidding on all your 3 projects because I can collaborate with a couple of my collagues and create a design team to work o Mais

$600 USD in 20 dias
(1 Comentário)
1.8
Qarchteam

Hi Client! I have real experience in design (interior, develop 2d drawings…) and just see my portfolio, I believe that you will have a best decision. And if you want to see more about my real project, click link belo Mais

$750 USD in 7 dias
(1 Comentário)
0.7
chetandeshmukh86

A proposal has not yet been provided

$555 USD in 4 dias
(0 Comentários)
0.0
samuraidave

I like the project I have knowledge of Polymertechnology for plastic injection molding. I would like to help you with this Project.

$555 USD in 5 dias
(0 Comentários)
0.0
jithincap

Hello i am from india and i am a product designer working in steel and plastics. most of my works are technical and goes into defence and electronic products. i ahve experience in two consumer electronic products al Mais

$250 USD in 3 dias
(0 Comentários)
0.0
johnwardle

Singularity87, I have 5 years experience designing in Solidworks and have been a full-time engineer designing injection molded parts for over 4 years. I am very experienced with some different ways of designing cas Mais

$250 USD in 3 dias
(0 Comentários)
0.0
PioneerDesign13

HI, This is Hemanth here ( for Pioneer Design ). Pioneer Design & Engineering Services provides an efficient, effective and cost friendly CAD/CAE/PDM/PLM services in product-design and development for Automotive, Mais

$388 USD in 5 dias
(0 Comentários)
0.0
gayatry

I am an engineer & 3d prototype [url removed, login to view] of my 3d portfolio is [url removed, login to view] After looking my portfolio,you will fin me suitable for this job. Thanks & best Regards Ashok

$333 USD in 3 dias
(0 Comentários)
0.0