Encerrado

Plastic Injection Molded Casing Design for new Product - Project Three

We are working on a new technical product line and require some work done on designing plastic casing parts. This plastic casing design will need to be sent to a plastic injection mold manufacturer to be able to create the plastic injection mold designs.

Throughout the design process it must be kept in mind, the cost and complexity of the plastic injection moulding process. It is not necessary to design the actual plastic injection mold though. Only the 3D design of the actual parts must be created with all necessary documents to pass on to the mold manufacturer.

The overall project is to be separated into 3 sub projects and each sub project will have two sections. This is because there are a total of 6 parts that must be designed and the two parts make up a casing. Therefore there are 3 pairs of casing parts and each pair will have a separate project. We would like one individual to take on all four projects but depending on time scale we may except more than one person to speed up the process.

To give a basic idea of the parts;

Sub Project One

There are two separate parts that must be designed in this project. They are similar but not the same. The two parts go together to make one complete shell. This shell is to be connected onto an L shaped metal plate via screws through the sides. Inside the casing will be motors, pulleys, belts and electronics. The design will have mounting pillars for a PCB and pillars on both parts to allow them to be screwed together. One major factor in this project is cost (more so than in other projects). Cost consideration must taken into account at all times during the project and any potential savings in cost through design will need to be communicated to us.

I have done a very quick model of the parts in sketch up for your reference but we will provide much more detailed specs when the project is underway. Please find the model in sketch up format below.

[url removed, login to view]

The other 3 projects are similar to Project One but require different part designs.

Basic Part design for Project Two...

[url removed, login to view]

Basic Part design for Project Three...(This project)****************

[url removed, login to view]

Please note that the 3d files provided above are just to give you an idea of the scale and basic shape of the parts. Full details will be provided on request within reason and the rest will be provided once the project is underway.

We also may accept hourly offers, but only if an accurate estimate on the time the project will take is provided.

Please note that you are only bidding on Project Three. Project One and Project Three are also available.

For those of you who cannot view the linked sketch up files, I have added the actual files to the brief now. Hope this helps.

Please use the files uploaded to Freelancer. One of the files linked in the description is a jpg and is not relevant to this project.

Habilidades: Modelagem 3D, CAD/CAM, Fabricação de produtos, Design de Fabricação, Desenho de Produto

Ver mais: plastic casing manufacturer, sketch up model, sketch up 3d model, sketch 3d model, shell 3d model, screws 3d model, request 3d model, product manufacturing cost, product design of all time, product design full time, product design and manufacturing, plate 3d model, plastic 3d model, person 3d model, pcb 3d model, part time product design, pair line, on line 3d design, new product designs, new design product, metal design, metal 3d model, line manufacturing process, jpg to 3d model, i have a design but i need a manufacturer

Acerca do Empregador:
( 14 comentários ) Lenggries, Germany

ID do Projeto: #5129975

16 freelancers estão ofertando em média $446 para este trabalho

zoAnim

Hello Singularity, I am a mechanical engineer with 12 year experience in product design especially in plastic. I read all your three projects and I will be bidding in this three. Looking for assisting you on Mais

$618 USD in 15 dias
(59 Comentários)
6.4
psapiens

Ready to start!, can you send me more details? Resumed portafolio: [url removed, login to view] (NO ALL MY DESIGNS ARE INCLUDED HERE) Please check my full public profiles at: [url removed, login to view] Mais

$833 USD in 5 dias
(25 Comentários)
5.8
udayd75

Hello, iam interested to work on all 6 parts, if you tell your budget for all 6 parts we can start immediately please look at my projects and client review please read my proposal and iwill work for this project a Mais

$368 USD in 6 dias
(31 Comentários)
5.5
avtar1073

Hello, We have studied your requirements thoroughly and these are compatible to us. , We have already done that types of many projects. As we believe in teamwork, and with our best co-ordinatng efforts We ensure yo Mais

$422 USD in 3 dias
(25 Comentários)
5.1
inderar88

Hello, Thanks for providing me an opportunity to bid on your project. REQUIREMENT UNDERSTANDING: After Reading Your Job Description, I believe that you are looking for an experienced artist. I have over 4 years Mais

$421 USD in 4 dias
(10 Comentários)
5.0
ahmedhamdypop

Dear Sir, This is Ahmed Hamdy an Industrial and CAD Engineer for more than 8 years, I'm working as R&D Engineer for 4 years, I can do this project in a very very short time with a high quality with the lowest price

$611 USD in 7 dias
(27 Comentários)
4.8
Malek3D

A proposal has not yet been provided

$1000 USD in 9 dias
(3 Comentários)
4.5
shahidaasy2002

Benchmark in quality work with reliable and flexible teamed work services are guaranteed. As per your required design of CAD 3d modeling of injection mold casing design please see my similar work done in my dropbox Mais

$322 USD in 7 dias
(13 Comentários)
4.2
hectomg

Hello, I'm a mechatronics engineer and I'm certified in SolidWorks, I have alot of experience doing 3D models for plastic production. Please see my profile here and my portfolio at [url removed, login to view] Best Regards Mais

$333 USD in 3 dias
(3 Comentários)
4.2
salmanmughal

Hi, I am Mechatronics Engineer and currently doing job as Mechanical Design and Development Engineer in reputed organization in Pakistan. I can do your project using solidworks. I have done lot of CAD/CAM and Rever Mais

$250 USD in 7 dias
(4 Comentários)
4.1
mikebudd

Hello, I am a Electrical/Mechanical Designer with over 20 years of experience. I also have a Bachelors of Science in Mechanical Engineering. I have designed several enclosures similar to yours for manufacturing by in Mais

$250 USD in 5 dias
(4 Comentários)
3.2
GURUJAYA

I am retired Engineering CAD Professional with 23+ years experience in Design and Fabrication Line. I am well versed with AutoCAD/CAD. I can prepare your product drawing for mold fabricators in AutoCAD/CAD.. Ne Mais

$250 USD in 5 dias
(2 Comentários)
3.0
badrev71

Hi, I am interested in this project but can not seem to open the attached links, can you email me a pdf of the sketchup drawing that this project is about and I will revise my bid, badrever71ATyahoo com au Alternati Mais

$320 USD in 5 dias
(1 Comentário)
2.5
oroborus

Hi. I'm an industrial designer with a little bit of plastic injection production experience. I'm bidding on all your 3 projects because I can collaborate with a couple of my collagues and create a design team to work o Mais

$600 USD in 20 dias
(1 Comentário)
1.8
AdnanSikandar

CAD/CAM SOLID WORKS PROFESSIONAL MOLD DESIGNER WORKING FOR "[url removed, login to view]" Also working with our vendors like "[url removed, login to view]" for our mold manufacturing Many mold designs can be sent to you if you a Mais

$277 USD in 5 dias
(0 Comentários)
0.0
saifie

Dear Customer, After studying your attached files we have understand your requirement and we can fulfill your requirement. JSM SERVICES was founded with a vision to provide Mechanical Engineering design solutions t Mais

$444 USD in 4 dias
(0 Comentários)
0.0
johnwardle

Singularity87, I have 5 years experience designing in Solidworks and have been a full-time engineer designing injection molded parts for over 4 years. I am very experienced with some different ways of designing cas Mais

$250 USD in 3 dias
(0 Comentários)
0.0
Al1xArts

I introduce myself as Alix, industrial designer with 30 years experience. I have designed many different products – consumer, office, industrial and medical - that require injection moulding and I offer my Alix Arts se Mais

$722 USD in 5 dias
(0 Comentários)
0.0