Enable IPv6 Access to DVR

@ayesha0124

Hi there, I fully understand the urgency of your situation with enabling IPv6 access to your Hikvision DVR through your Starlink and Ubiquiti setup. With extensive experience in network administration and security, I’m confident I can help you resolve the issues you’re facing. I will start by verifying the IPv6 prefix delegation and routing on your UDM-US to ensure everything is correctly set up. Next, I will craft the necessary IPv6 firewall rules or port-forward equivalents to securely expose your DVR. Lastly, I’ll confirm the DVR's IPv6 settings and guide you through any specific adjustments needed in the Hikvision interface to ensure seamless external access. I can begin working on this immediately and expect to have everything resolved within 3 days. Once your DVR’s web interface is accessible from an external IPv6 network, we can close the project.

@jovicaa

Hello! I can quickly configure your UDM-US and Starlink IPv6 setup to expose your Hikvision DVR securely. I’ll verify prefix delegation, fix routing, set the correct firewall rules, and confirm DVR settings so you can access it externally. Experienced with UDM interfaces, Starlink quirks, and IPv6 port access. Delivery: fully tested remote access. Best Regards!

@dtk507

Hi there! I understand that you need assistance to make your Hikvision DVR accessible over the internet using a Starlink-to-Ubiquiti UDM-US setup. Having successfully resolved similar issues in past projects, I have a solid grasp of both UDM interfaces and Starlink configurations. ✔My Plan: - Verify IPv6 prefix delegation and routing on the UDM-US. - Craft the necessary IPv6 firewall rules or equivalent port-forwarding to ensure secure DVR access. - Confirm the DVR’s IPv6 settings, guiding you through the specific Hikvision settings. Once we’ve achieved external access to the DVR’s web interface for streaming, I’ll wrap up the project promptly. Regards, Davide

@Coredev794

Hi Scott, We would like to grab this opportunity and will work till you get 100% satisfied with our work. We are an expert team which have many years of experience on C Programming, Linux, Computer Security, Network Administration, Network Security, Network Engineering, Ubiquiti, Network Monitoring Please come over chat and discuss your requirement in a detailed way. Regards

@Chrism262

EXPERT ((Linux, Network Security, Computer Security, C Programming, Network Engineering, Network Monitoring, Ubiquiti and Network Administration)) DEAR EMPLOYER, I’ve completed the exact same projects before successfully. Awarding me will be the fastest way to complete your task with the best rates possible. I CAN ASSURE YOU 100% THAT WE ARE FULLY CAPABLE OF EXECUTING ANY LEVEL OF TASK/PROJECT BASED ON THE SKILL REQUIRED. I am fully confident about our skills and my understanding of the project description and we are ready to go through any test or sample task you assign to acquire your trust. Let me know when are you available for an initial 15-30-minute discussion (FREE OF CHARGE) so we can discuss the requirement in detail and I can walk you through the mentioned systems to acquire your trust in my skill. REST ASSURED YOUR WORK IS IN VERY SAFE AND PROFESSIONAL HANDS. THANK YOU

@dragomira2

Hello Scott, Thank you for the detailed description of your setup and the challenges with IPv6 access to your Hikvision DVR. I understand the urgency of getting your DVR securely accessible over IPv6, especially given the complexities introduced by Starlink’s prefix delegation and the UDM-US in bypass mode. With extensive experience in network engineering, Linux systems, and Ubiquiti devices—including UDM and Starlink integrations—I’ve helped clients achieve exactly this type of remote access. I’m familiar with the quirks of Starlink’s IPv6 delegation, the nuances of the UDM’s firewall and routing rules, and the specific settings within Hikvision devices that can make or break external connectivity. Here’s how I’ll approach your project: - First, I’ll verify the IPv6 prefix delegation on your UDM-US and ensure it’s routing traffic as expected to your internal network and the DVR. - Next, I’ll review and correct IPv6 firewall rules or set up secure port-forward equivalents on the UDM-US, taking care to minimize exposure while enabling the necessary access. - I’ll guide you through confirming and adjusting the DVR’s IPv6 configuration, including any Hikvision-specific toggles or security settings that might affect external reachability. - Throughout, I’ll provide clear instructions or remote support—whether through screenshots, step-by-step guidance, or temporary controller access—until you can reliably access the DVR’s web interface and stream video externally. I look forward to helping you resolve this quickly and securely!

@rositai9805

Hi, there, I have 7+ years of experience in network security and Unifi/Ubiquiti deployments, with extensive IPv6 and secure remote access expertise. I have mastered the required skill set, including UDM-US configuration, IPv6 prefix delegation, firewall rules, and Hikvision network settings. I will leverage hands-on experience from similar Starlink/Ubiquiti deployments to enable reliable IPv6 reachability while keeping the DVR exposure minimal and secure. ✅ Verify and correct IPv6 prefix delegation and routing on the UDM-US, ensuring the Starlink-provided IPv6 prefix is properly advertised to the DVR and reachable from the internet. ✅ Craft precise IPv6 firewall rules or port-forward equivalents tailored to the DVR's needs, with least-privilege access and secure remote connectivity. ✅ Validate the DVR's IPv6 settings in Hikvision menus (gateway, IPv6 toggle, DNS) and adjust as needed for external access. ✅ Perform end-to-end testing from an external IPv6 network, confirm web interface access and video streaming, and document any adjustments. ✅ Provide a concise checklist and steps to reproduce, plus screenshots and backups for future reference, so you can audit or revert if Starlink/Ubiquiti change defaults. I look forward to working with you. Best Regards, Rosita Iniesta.

@rajahunainweb

Hi, There, I understand you’re experiencing difficulties getting your Hikvision DVR reachable over the internet through your Starlink-to-Ubiquiti UDM-US setup. Properly configuring IPv6 prefixes and firewall rules can be complex, and I can help ensure that your DVR is securely accessible via the necessary settings. I am Raja Hunain, with over 3 years of experience in C Programming, Linux, Computer Security, and especially Network Administration and Security. My expertise in Ubiquiti systems and network monitoring will provide the ideal solution for your issue. Here is my portfolio for your review: https://www.freelancer.com/u/rajahunainweb I am committed to resolving your situation promptly and efficiently. Looking forward to collaborating with you for a successful solution. Thanks, Regard, Raja Hunain

@ianb65

Hello, there! I can get your Hikvision DVR reachable over IPv6 through your Starlink → UDM-US setup and close this out quickly. I’ve worked with UniFi gateways, Starlink IPv6 behavior, and IPv6-only exposure scenarios, so I’ll start by validating prefix delegation and routing on the UDM-US in bypass mode to ensure the delegated /56 or /64 is actually usable end-to-end. From there, I’ll craft the correct IPv6 firewall rules on the UDM-US (the IPv6 equivalent of port forwarding) to securely expose only the required DVR services. I’ll also review the Hikvision network configuration with you, confirm its IPv6 address selection, gateway behavior, and any Hikvision-specific toggles that commonly block external access even when an address is present. The goal is straightforward: reliably load the DVR web interface from an external IPv6 network and confirm live and recorded video streaming before we wrap up. Best regards, Ian Brown

@nusratu1

Hello, It seems you're facing issues with making your Hikvision DVR accessible via IPv6 on your Starlink-to-Ubiquiti setup. I can step in to resolve this quickly. I’ll first verify the IPv6 prefix delegation and routing on your UDM-US. If there are any firewall rules or port-forward settings that need adjustments, I'll handle those. Additionally, I’ll check your DVR’s IPv6 configuration to ensure it’s correctly set for external access. Once we confirm everything is in place, you should be able to access the DVR from outside your network seamlessly. Let’s get this sorted out quickly! When can we start working on this?