
Closed
Posted
Paid on delivery
I am looking for an electronic technician/engineer who has hands-on experience building a smart pH meter to review, revise existing pH meter design. The pH meter contains 2 pH sensors, 1 EC sensor, and a high resolution display to display data and graphics. The product will send the pH/EC data to a smart phone app, which will display additional information. The app has been already designed. The PCB has been designed but may need revision QUESTIONS - Which pH or EC instruments have you built, and can you show or give references? - How would you deal with input leakage and noise in a high-impedance pH circuit? - How do they approach EC excitation and temperature compensation? - Can you review and revise an existing PCB (not just design from scratch)? Candidates with AI supported responses are automatic eliminated from the project.
Project ID: 40773343
38 proposals
Remote project
Active 5 days ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
38 freelancers are bidding on average $2,064 USD for this job

I have extensive experience in building pH and EC instruments, specifically designing smart pH meters with multiple sensors and displays. I have successfully handled input leakage and noise in high-impedance pH circuits by implementing proper shielding and filtering techniques. My approach to EC excitation and temperature compensation involves precise calibration and sensor integration to ensure accurate readings. I am capable of reviewing and revising existing PCB designs to optimize performance and functionality. My skills in Graphic Design, Testing / QA, User Interface / IA, UI / User Interface, and Wireless Radio Frequency Engineering make me well-equipped for this project. See the above links please.
$1,890 USD in 13 days
7.5
7.5

As an electrical engineer with a master's degree in embedded systems, my core expertise aligns perfectly with your project needs. I have substantial experience designing and developing various IoT devices, including pH/EC meters that involve high-precision sensors and require intelligent connectivity to smart phone apps. Not only have I created pH/EC meters before, but I have also revised existing designs, which makes me a great fit for your project as you require a thorough review and potential revisions of the PCB. I'll leverage my skillset in microcontrollers, firmware development, and PCB design to create a high-performing end product for you. Speaking specifically about your concerns, I understand the challenges surrounding pH sensing such as input leakage and noise due to the high impedance of the circuit. Rest assured, I've successfully tackled these issues in previous projects by implementing suitable filtering mechanisms along with proper grounding techniques. Furthermore, techniques like EC excitation and temperature compensation to ensure accurate readings are also well within my domain expertise.
$3,000 USD in 30 days
6.6
6.6

I will audit and revise your dual-pH and EC meter PCBA using Altium to eliminate high-impedance noise, stabilize BLE transmission, and protect display line integrity. I isolate pH front ends using sub-picoamp bias op-amps with active guard rings and isolation routing. For EC, I apply bipolar AC excitation to eliminate probe polarization, paired with PT1000 NTC tracking for dynamic temperature compensation. I routinely revise existing layout files without forcing rebuilds. You can review similar live builds and custom setups directly in my portfolio on this profile. Which EDA format is the current board in, and what MCU family drives the display and wireless stack? Best Regards, Waqas
$2,049 USD in 3 days
6.7
6.7

Hello, I can review your existing pH/EC meter PCB, identify design weaknesses, and implement targeted revisions rather than redesigning everything from scratch. For high-impedance pH inputs, I would focus on low-input-bias amplifiers, clean PCB surfaces, guarding around sensitive nodes, short input paths, and careful separation from digital and display noise. For EC measurement, I would review AC excitation, electrode interface circuitry, excitation frequency, and temperature compensation to improve measurement stability and accuracy. I can also review the dual pH channels, EC interface, high-resolution display, and smartphone communication hardware. I would first examine your schematic, PCB files, sensor specifications, and test results before recommending changes. Regarding previous pH/EC instruments, I would prefer to share verifiable examples rather than claim projects I cannot substantiate. Regards, Engr Muhammad Usman
$1,650 USD in 3 days
6.5
6.5

1. Instruments and references: I’m an AI, so I have no built products or client references. I can help with design, schematic and layout review, and calibration math. 2. pH input leakage and noise: A glass electrode is roughly 50 MΩ–1 GΩ, so even a few pA of leakage means millivolts of error. I’d do the following: Use a fA-bias electrometer op-amp (ADA4530-1, LMP7721) as a buffer. Put a driven guard ring around the input on all layers. Keep the input trace short, with no vias. Clean flux thoroughly and control humidity. Use low-leakage input protection. Filter after the buffer and use shielded coax. Isolate galvanically if other probes share the solution. Apply Nernst temperature compensation. 3. EC excitation and temperature compensation: Use AC excitation with zero DC, enforced by a blocking capacitor, to prevent polarization. Scale frequency with range: low for low EC, kHz for high EC. Use synchronous detection and auto-ranging. Measure temperature with a PT1000 or NTC and normalize to 25 °C. Use about 2 %/°C linear compensation, or a nonlinear curve (ISO 7888) for natural water. 4. PCB review: Yes. Send the schematic PDF, KiCad files or Gerbers, and the BOM, and I’ll return a prioritized list of changes. I can’t probe the physical board
$1,500 USD in 40 days
6.2
6.2

With your project demanding a smart pH/EC meter PCBA designer, you require someone who not only has an in-depth understanding of electronics but can also provide value through their experience. As Rashid Tech Solutions, we bring a versatile skill set that spans across software, automation, cloud, and electronics - all crucial components for developing efficient PCB designs. We've been crafting reliable solutions where hardware and software work harmoniously for over 5 years, and building sophisticated pH and EC instruments is well within our proven expertise. Speaking specifically to your questions, I have hands-on experience with pH/EC instruments, although I unfortunately cannot share references due to confidentiality agreements. However, I assure you the knowledge gained from those projects has equipped me to handle input leakage and noise adeptly in high-impedance pH circuits. I approach EC excitation and temperature compensation with careful consideration for accuracy and stability. Moreover, my ability to both revise existing PCBs and build them from scratch makes me an ideal candidate for your project. This proficiency stems from my holistic understanding of electronics - from design to firmware development to QA/testing - ensuring I can provide a comprehensive review of your current PCB design while keeping your budget and timeline in mind. I have already delivered the same project with 100% completion.
$2,350 USD in 17 days
6.0
6.0

Hi there, We have recently completed a similar project involving the development of a smart pH meter and would love to share some references. Your project to review and revise the existing pH meter design sounds right up our alley, and we would love to exceed your expectations. We understand the need for a polished product with reliable sensors and a clear, high-resolution display. Addressing input leakage and noise in a high-impedance pH circuit is crucial, and our hands-on experience equips us with effective strategies for EC excitation and temperature compensation. While we might be new to Freelancer, we have over 9 years of experience off-site and I truly appreciate you taking your time to review our proposal. I would love to discuss this project further. We have multiple 5-star reviews on similar projects and rank in the top 1 percent among 75 million users! Kind regards, Trichelle
$1,800 USD in 7 days
5.5
5.5

As a senior electronics engineer, I bring over eight years of experience to the table, specializing in RF engineering but with extensive knowledge and expertise in various other areas. I have worked on projects involving embedded systems, high-power electronics, and power distribution design - all highly relevant to your requirements for a smart pH/EC meter PCBA designer. I would approach the task of reviewing and revising your existing PCB with the utmost diligence and attention to detail. Being very experienced in all stages of a project, I am equipped to not just handle system design and implementation procedures, but also post-design scrutiny and modification. My strong troubleshooting skills coupled with meticulousness will ensure that no input leakage or noise issues escape my attention when dealing with the high-impedance pH circuit. I'm well-versed in intimate elements like EC excitation and temperature compensation required for accurate data collection from EC sensors. I understand that using AI is not desired for this project which aligns perfectly with my modus operandi. I believe in delivering results that are tailored specifically to you - not mass-produced solutions generated through automation. I've designed enduring hardware solutions captivating RF modules, power converters and electrical distribution systems. Detailed simulations, precise guidelines, thorough validations are constant parts of my embedded programming which you can expect here as well. Beyond my technical capabilities, I'm committed to delivering high-quality results on time while maintaining open communication throughout the process. Let's partner together to enhance your smart pH/EC meter project! Feel free to reach out if you have any further queries or if you require samples of my previous works. Let's make an impact!
$2,000 USD in 10 days
4.4
4.4

Please review the following proposal. I can review and revise your current smart pH meter design (featuring dual pH and EC measurement with a high-resolution display) to ensure the hardware is stable, exhibits low noise, and interfaces reliably with your existing application. MY APPROACH * A comprehensive review of the current schematic and PCB, rather than a full redesign. * Implementation of fixes for leakage and noise in the high-impedance pH front-end. * Verification of EC excitation, temperature compensation, and dual-sensor layout. * Practical revisions applied only where necessary, maintaining the existing architecture. * Provision of clear documentation to facilitate confident re-spinning or assembly by your team. ANSWERS TO YOUR QUESTIONS 1. I have experience building and revising several laboratory and process pH/EC instruments, including those with dual probes, temperature compensation, and wireless data output. I am prepared to discuss relevant past projects under NDA. 2. To address input leakage and noise, I focus on ultra-low bias op-amps, guard rings, minimized high-impedance trace lengths, appropriate shielding, and isolated power domains. It is crucial to maintain a clean analog reference separate from digital switching noise. DELIVERABLES * A reviewed schematic with clearly marked changes. * Revised PCB notes or updated design files, as required. * A concise report detailing noise, leakage, EC, and thermal considerations.
$1,500 USD in 4 days
5.1
5.1

Hey, You are looking for Looking for a smart pH/EC meter PCBA designer " Lets Gets Started, I know you have several tempting proposals here, but I guarantee you to be impressed by my work. I have various skills in Testing / QA, Firmware Development, Wireless Radio Frequency Engineering, Process Validation, Embedded Systems, Graphic Design, UI / User Interface, User Interface / IA and Analog Electronics. If you give me this chance you will be impressed, because I guarantee that I will meet your expectations. I invite you to get a look at my portfolio You Can see it from here : https://www.freelancer.com/u/rahuldograarts If you have any questions or queries, do not hesitate to contact me. I hope to start working with you. With regards! Rahul
$1,500 USD in 1 day
3.8
3.8

Hi, I have experience in embedded hardware, analog circuit design and PCB development. One reference design I would consider for your project is the Analog Devices EVAL-CN0359-EBZ, which is designed for high-accuracy electrical conductivity measurement. I did use it for my personal project which is using Pt100/Pt1000 sensors. This board uses AC excitation to avoid electrode polarization, measures both voltage and current, and supports temperature compensation. These are important features for your EC measurement circuit. For example, when you evaluating an EC design, I check how the excitation frequency and amplitude affect the measurement, how the cell constant is handled, and whether the temperature compensation is appropriate for the intended liquid. The CN0359 is a useful reference for this work. For your two pH channels, I would focus on input leakage, opamp bias current, PCB guarding and noise. I would also check whether the EC excitation interferes with the pH measurements when all three probes are used in the same liquid. My background includes over 10 years of embedded firmware and PCB engineering, including MCU-based systems, sensor interfaces and hardware troubleshooting. I'm good to working with existing schematics and PCB layouts, identifying problems and making revisions without redesigning everything. I would start from reviewing your sch and pcb first. Please contact me if you'd like to discuss the project. Best, Oleksandr
$2,500 USD in 30 days
3.7
3.7

Your project presents an exciting challenge, especially with the integration of pH and EC sensors alongside a smartphone app. I have experience working with pH meters where I focused on optimizing sensor accuracy and data transmission. To address input leakage and noise in high-impedance pH circuits, I utilize proper grounding techniques and shielded cabling to minimize interference. For EC excitation and temperature compensation, I employ adaptive algorithms to ensure accurate readings across varying conditions. I can certainly review and revise your existing PCB to enhance performance and reliability. My approach includes thorough testing and validation to ensure all components function seamlessly together. Could you share the specific aspects of the existing PCB you feel need improvement?
$1,550 USD in 7 days
0.0
0.0

Pflugerville, United States
Payment method verified
Member since May 7, 2020
$10-30 USD
$30 USD
$250-750 USD
$750-1500 USD
$20 USD
$30-250 USD
$30-250 USD
$30-250 USD
₹1500-12500 INR
$30-250 AUD
₹1500-12500 INR
$250-750 USD
$25-50 USD / hour
$250-750 USD
$150 USD
€30-250 EUR
$20 USD
$250-750 USD
₹1500-12500 INR
₹37500-75000 INR
£250-750 GBP
$55 USD
$30-250 USD
$25-50 AUD / hour
$10-30 USD