
Closed
Posted
Paid on delivery
1. Scope of Work & Detailed Technical Requirements Objective 1: Analytical Model Development & TCAD Validation • Mathematical & Physics Formulation: o Formulate 2D/3D surface potential models using Poisson's equation (parabolic approximation, superposition, or evanescent mode method) with appropriate boundary conditions for multi-gate architectures (Double-Gate, Gate-All-Around and Junctionless Gate-All-Around). o Calculate electric field distribution, potential profile, and energy band bending across the channel and tunneling junction. o Implement Non-Local Band-to-Band Tunneling (BTBT) models (e.g., Kane's model, Wentzel-Kramers-Brillouin (WKB) approximation) to extract tunneling current. o Formulate expressions for Key Performance Indicators (KPIs): Threshold Voltage, On-State Current, Off-State Current, Subthreshold Swing, and Ambipolar Current. • TCAD Numerical Calibration: o Build full 2D/3D numerical TCAD models in Silvaco ATLAS or Cogenda Visual TCAD. o Enable critical physical models: Non-local BTBT, Bandgap Narrowing (BGN), Shockley-Read-Hall (SRH) recombination, Lombardi mobility/surface scattering, and quantum confinement corrections. o Deliverable Requirement: Analytical results (executed via MATLAB/Python) must match TCAD simulation data across all operating regions with an absolute average error rate of (< 5%). Objective 2: Gate Material & Oxide Engineering • Gate Architecture & Work-Function Engineering: o Model Dual-Material Gate (DMG) and Triple-Material Gate (TMG) multi-gate TFET structures. o Analyze the effect of varying gate work functions on tunneling barrier width, peak electric field, and potential step profile. o Evaluate suppression of ambipolar behavior at the drain end through work-function engineering. • Dielectric & Stack Engineering: o Evaluate high-k gate dielectrics versus standard SiO2 o Design gate-oxide stacks to minimize equivalent oxide thickness (EOT) while mitigating gate leakage. • Performance Metrics Target: o I_{on}/I_{off} ratio > 10^6 o Average Subthreshold Swing (SS_{avg}) < 60 \{ mV/decade} at room temperature (300{ K}) o Reduced Drain-Induced Barrier Lowering (DIBL) and minimized parasitic gate capacitance (C_{gs}, C_{gd}). Objective 3: Novel Material Exploration & Optimization • Material Selection & Heterojunction Design: o Explore low-bandgap and high-carrier-mobility materials: III-V semiconductors (InGaAs, GaAs, InAs) or 2D materials ({MoS}_2, {WSe}_2, Black Phosphorus). o Design heterojunction TFET structures (Type-II staggered or Type-III broken band alignment at the tunneling junction) to lower tunneling barrier height and increase I_{on} o Optional: Investigate Ferroelectric material integration (Negative Capacitance TFET / NC-TFET) using {HZO}to achieve internal voltage amplification. • Optimization Framework: o Perform multi-objective optimization balancing carrier effective mass, bandgap, dielectric constant, and channel thickness. o Provide trade-off plots (e.g.,I_{on}vs SS, I_{on}vs parasitic capacitance). Objective 4: Verilog-A Compact Modeling & Circuit-Level Integration • Compact Model Extraction: o Convert the analytical equations into a standard Verilog-A model or construct an accurate TCAD-driven Lookup Table (LUT) macromodel. o Include static (IV) and dynamic (CV) behavior suitable for SPICE-class simulators. • Circuit-Level Simulations (Cadence Virtuoso / Spectre / HSPICE): o Implement the Verilog-A TFET model into target circuit topologies: a. Basic Logic Gates: Inverter, 2-input NAND, 2-input NOR. b. Ring Oscillator: 5-stage or 7-stage ring oscillator to quantify propagation delay, oscillation frequency, and transient response. c. Memory Cell: 6T SRAM cell to evaluate Read Static Noise Margin (SNM), Write Static Noise Margin (WSNM), hold margin, and leakage power. • Circuit Benchmarking Metrics: o Propagation Delay, Static Power Dissipation, Dynamic Power, Power-Delay Product (PDP), and Energy-Delay Product (EDP) under ultra-low voltage conditions. 2. Deliverables Matrix & File Formats Phase 1: Mathematical & Analytical Model Objective: Mathematical & Analytical Model Required Output / Deliverable: Derivation documents, solved potential equations, script for I/V and C/V generation Target Format: MATLAB scripts (.m), Python scripts (.py), PDF report Phase 2: TCAD Baseline & Gate Engineering Objective: TCAD Baseline & Gate Engineering Required Output / Deliverable: Validated TCAD structure files, mesh scripts, parameter variation plots Target Format: TCAD Deck (.cmd, .in), Structure files (.str, .grd) Phase 3: Novel Material Optimization Objective: Novel Material Optimization Required Output / Deliverable: Comparative study report, band diagrams, optimized geometry specs Target Format: PDF report, Raw data spreadsheets (.xlsx/.csv) Phase 4: Compact Model & Circuit Benchmark Objective: Compact Model & Circuit Benchmark Required Output / Deliverable: Functional Verilog-A file, circuit schematics, simulation netlists, transient/AC/DC plots Target Format: Verilog-A (.va), SPICE netlists (.sp/.cir/.scs), Waveforms
Project ID: 40773588
22 proposals
Remote project
Active 2 days ago
Set your budget and timeframe
Get paid for your work
Outline your proposal
It's free to sign up and bid on jobs
22 freelancers are bidding on average ₹23,944 INR for this job

Hi There, Hope you are well. I have expertise in developing analytical models, TCAD calibration, gate material engineering, novel material exploration, and Verilog-A compact modeling for TFET structures. My focus is on deriving KPIs, optimizing performance metrics, exploring new materials, and circuit-level simulations to meet project objectives efficiently. Thanks in advance for the opportunity to working with you. Best Regards, Serazum
₹32,000 INR in 1 day
7.6
7.6

I understand that you're looking for advanced analytical model development for TFETs involving TCAD validation, mathematical formulations, and circuit-level integration. However, my expertise lies primarily in Python development and automation, specifically in web scraping and data extraction. While I can provide automation solutions and data handling, I do not possess the necessary background in electronics or TCAD modeling. Could you clarify if there are any aspects of the project that might align with my skills, such as data extraction or automation? Thank you for considering my input. Best, Hussein.
₹25,000 INR in 5 days
6.4
6.4

Calibrating analytical surface potential models against Silvaco ATLAS or Cogenda Visual TCAD requires exact boundary condition formulation to remain within your < 5% error threshold across all operating regimes. Technical execution plan: ✅ Analytical Modeling & TCAD Calibration: Formulate 2D/3D surface potential via parabolic approximation and superposition for DG and GAA architectures. Implement Kane's model and non-local WKB tunneling in Python and MATLAB, calibrated against Silvaco ATLAS numerical decks with BGN, SRH, and quantum corrections. ✅ Gate & Dielectric Engineering: Model dual-material and triple-material gates to create the step potential needed for ambipolar current suppression. Optimize high-k gate-oxide stacks to achieve SS < 60 mV/dec and Ion/Ioff > 10^6. ✅ Verilog-A & SPICE Integration: Build smooth, charge-conserving Verilog-A compact models with static I-V and non-linear dynamic C-V formulations, verified in SPICE for ring oscillator delay and 6T SRAM noise margins (SNM/WSNM). Which specific multi-gate architecture and channel material heterojunction (such as InGaAs or MoS2) should we establish as the primary baseline for the Phase 1 derivations?
₹20,000 INR in 1 day
4.6
4.6

Hi, PURE CODE here, from Saudi Arabia. Building your advanced analytical model for TFETs using visual TCAD/Silvaco TCAD with MATLAB comes down to one thing: a board that works on the first order and can be built at scale. I'm a senior embedded and electronics engineer with 10+ years of experience working with Python and Electronics. For your advanced analytical model, the real challenge is part availability and manufacturability. A common issue: no DFM check before ordering, so boards come back with assembly or clearance problems. My plan: first, review the schematic, parts and enclosure limits. Then, update the layout with DFM, power paths and grounding in mind. Finally, run DRC and a DFM check, then prepare Gerbers and the BOM. I've done PCB work in Python. A few questions to better understand the scope: 1. Does the board need to pass EMC testing? Then grounding and the layer stack are planned for it from the start. 2. Add test points for the key signals? I'd recommend it, debugging and production testing get much faster. 3. Does it need CE or FCC certification? I plan layout and filtering with that test in mind. I can start right away. Happy to go over the details here in chat and suggest the best approach. Looking forward to hearing from you, PURE CODE
₹25,000 INR in 7 days
2.6
2.6

As an adept Python programmer and analytical thinker, I possess the skills necessary to develop the advanced analytical models you require for TFETs. Drawing from my extensive experience in web and mobile development, I am well-versed in translating complex scientific equations into efficient algorithms, replicating your envisioned models with precision. I specialize in implementing mathematical and physics formulations, building 2D/3D TCAD numerical models in Silvaco ATLAS or Cogenda Visual TCAD, and calibrating them to achieve high match consistency with analytical results - all instrumental task for accurate analytical model developments. Additionally, my proficiency extends to gate material engineering, oxide engineering, Gate-Architecture & Work-Function Engineering, Dielectric & Stack Engineering. I am well-versed in assessing high-k gate dielectrics against standard SiO2 and designing gate-oxide stacks to minimize equivalent oxide thickness (EOT) while mitigating gate leakage. Such knowledge is essential for optimizing performance metrics such as I_on/I_off ratio, Average Subthreshold Swing (SS_avg), Drain-Induced Barrier Lowering (DIBL) and minimizing parasitic gate capacitance. Further complimenting these abilities is my proficiency in performing multi-objective optimization and attaining an understanding of material selection and heterojunction design that would prove valuable in executing Objective 3 of this project. Partnering with me means
₹25,000 INR in 7 days
2.0
2.0

Hi, Before, I developed TCAD-based models for advanced transistor structures and validated them against simulation data. - The main challenge was matching analytical surface-potential results with numerical TCAD output across all operating regions. - I calibrated non-local BTBT, mobility, recombination, and quantum-confinement models step by step. - The final workflow compared MATLAB results with Silvaco ATLAS data and reduced the average error below the target. For this project, the key factors are accurate physics, careful TCAD calibration, and a usable compact model. - First, 2D/3D multi-gate TFET structures will be built with validated meshing and boundary conditions. - Then, Poisson-based potential models, electric fields, band bending, and BTBT current will be implemented in MATLAB or Python. - Gate work-function, high-k dielectric, heterojunction, and material-optimization studies will follow. - Finally, a Verilog-A model or TCAD-driven LUT will be created for SPICE-level inverter, NAND, NOR, ring-oscillator, and SRAM simulations. Q1: Do you already have a baseline Silvaco or Visual TCAD deck and device geometry? Q2: Which platform should be used for the compact model: Verilog-A, LUT macromodel, or both? Budget: ₹25,000 Timeline: 15 days Looking forward to your reply.
₹25,000 INR in 15 days
1.0
1.0

Getting a closed-form surface potential model to track Silvaco or Visual TCAD inside your error target across every operating region, and then carrying that same model all the way into a 6T SRAM in Spectre, is really four projects stacked on top of each other, and the handoff between them is where it will hurt. I'll be straight about where I fit. I'm a software engineer, not a device physicist. I've spent 8 years building Python systems and data pipelines, and that's the part I can own: implementing the Poisson and BTBT equations in Python, sweeping work functions, oxide stacks and channel materials, scripting the TCAD-vs-analytical error comparison, and building the LUT macromodel from the simulation data. The TCAD decks, physics model choices and Cadence runs would need to come from you or a device person on your side. One question before anything else: do you already have calibrated ATLAS or Visual TCAD decks for the DG and GAA structures, or does that calibration start from zero? Thamer
₹21,825 INR in 7 days
0.0
0.0

I can deliver 'Advanced Analytical Model Development for TFETs Using Visual TCAD/Silvaco TCAD' end to end — clean architecture, tests, and deployment. I'll start with a short plan, share progress daily, and hand over production-ready code. Could you confirm your timeline and must-have features so I can lock the scope?
₹22,576.75 INR in 7 days
0.0
0.0

Hello. I understand you're aiming to develop an advanced analytical model for TFETs with precise TCAD validation. My expertise in mathematical modeling and TCAD simulation aligns directly with your objectives. I can formulate the required 2D/3D surface potential models using Poisson's equation and implement non-local band-to-band tunneling models to accurately extract tunneling current. My experience with Silvaco ATLAS will ensure that our TCAD models meet your error rate requirements while providing insightful performance metrics. I would love to discuss how I can contribute to your project goals. A free consultation would help us explore this further. With regards, Maanie
₹12,500 INR in 7 days
0.0
0.0

Hello, I have reviewed the complete scope covering analytical TFET modeling, TCAD validation, material/gate optimization, Verilog-A compact modeling, and circuit-level benchmarking. My proposed workflow is: • Derive surface-potential/electric-field models from Poisson’s equation with appropriate multi-gate boundary conditions • Implement Kane/WKB BTBT formulations and extract Vth, Ion, Ioff, SS and ambipolar current • Build MATLAB/Python scripts for I-V/C-V analysis and parameter sweeps • Calibrate analytical results against TCAD data with systematic error analysis toward the <5% target • Study DG/GAA/Junctionless GAA, DMG/TMG and high-k oxide engineering • Evaluate III-V/2D heterojunction alternatives and generate performance trade-off plots • Convert validated equations/data into Verilog-A or LUT compact models • Benchmark inverter, NAND/NOR, ring oscillator and 6T SRAM using delay, power, PDP and EDP metrics • Provide organized scripts, simulation data, plots and technical documentation I’m comfortable with semiconductor-device mathematics, numerical analysis, Python/MATLAB workflows and structured model validation. For proprietary Silvaco/Cogenda/Cadence execution, I would first confirm the exact simulator versions and license environment available rather than claim access I cannot verify. Please share the reference device structure, dimensions, doping profiles and baseline literature/model you want reproduced first. Best regards, Samnang
₹25,000 INR in 7 days
0.0
0.0

Hi, We’ve recently helped a client achieve similar results, delivering a solution that improved their overall workflow and supported their business goals. I can help you achieve a similar outcome with a clean, professional, and user-friendly solution tailored to your needs. I understand the importance of creating a seamless experience that meets your requirements while remaining simple, effective, and reliable. My expertise in analytical model development, TCAD validation, and circuit-level integration makes me well-suited for this project. I am confident in my ability to formulate and validate complex models and perform rigorous material optimization. I bring a strong focus on quality, functionality, and clear communication throughout the project. I’d be happy to help bring your vision to life. Regards, dannyd05.
₹18,750 INR in 7 days
0.0
0.0

Bounded scope: Phase 1 only: derivation document (PDF) for surface-potential and Kane-type BTBT model for one multi-gate structure, plus MATLAB/Python script generating I/V and C/V curves from the model, with comparison against client-supplied reference TCAD data. Bounded assumptions/exclusions: Assumes client supplies reference TCAD data in a stated format. Excludes TCAD runs (Silvaco/Cogenda), TCAD deck/structure files, Verilog-A, Cadence/Spectre circuit benchmarks, SRAM/ring-oscillator work, material exploration, NC-TFET optimization, and any hardware. Developer choices (library, plotting, Python version) are stated defaults. Scope and required access must be agreed before work starts. Proposed internal validation (not client criteria): script runs cleanly; I/V and C/V outputs generated; average error vs reference data reported against the <5% target. No tests have been run. Full scope assumptions and exclusions: Bounded scope limited to Phase 1 analytical model: a derivation document (PDF) for a surface-potential/BTBT (Kane) model for one multi-gate structure (DG or GAA), and a MATLAB/Python script generating I/V and C/V curves. Assumes client supplies or accepts a reference TCAD dataset (no Silvaco/Cogenda TCAD runs, no TCAD deck or structure files, no Cadence/Spectre circuit work, no Verilog-A, no SRAM/ring-oscillator benchmarks, no material exploration or NC-TFET optimization, no hardware). Assumes the agreed reference data is in a stated format. Developer choices (library, Python version, plotting) are stated defaults, not client requirements. Agent does not verify the <5% match against TCAD itself unless reference data is provided. Scope and required access must be agreed before work starts. Project reference: Advanced Analytical Model Development for TFETs Using Visual TCAD/Silvaco TCAD. Final proposed fixed price: 131.65 USD. Listing currency is INR; the submitted amount uses the current exchange rate. Estimated delivery: 10 day(s). Disclosure: This bid and any resulting work may use automated AI tools. Deliverables will be validated against the project's stated requirements before submission.
₹12,501.19 INR in 10 days
0.0
0.0

Yes, I can build the model implementation and validation harness. Your spec is a physics job with an engineering tail, and I own the tail: implementing the 2D/3D surface-potential formulation in Python, driving the Silvaco/Visual TCAD runs, extracting fields and BTBT currents, fitting the analytical model to the simulated data, and handing back reproducible plots plus a parameterised model — every number traceable to a run. What I don't do is invent the device physics. Give me the formulation and boundary conditions and I implement and validate them; if the theory still needs deriving, that part needs a device physicist and I'll say so rather than bluff. What I need: the device geometries, your TCAD deck, and the models you want compared. 7 days for the first structure end to end. $300. Tomer Saguey
₹28,500 INR in 7 days
0.0
0.0

**⚡ TFET MODELING | TCAD VALIDATION | COMPACT MODELING** Hello, Your project requires a structured approach to TFET analytical modeling, TCAD validation, material optimization, and circuit-level simulation. ? **Analytical Modeling:** Develop surface-potential and electrical-performance equations using Python or MATLAB. ? **Numerical Validation:** Compare analytical results with TCAD simulations, measure errors, and document assumptions. ⚙️ **Device Optimization:** Evaluate gate work functions, dielectric stacks, and material parameters using Ion/Ioff, subthreshold swing, and DIBL. ? **Compact Modeling:** Develop or validate Verilog-A models and SPICE-compatible simulation workflows based on available tools. ? **Deliverables:** Organized scripts, simulation plots, parameter tables, and technical documentation. Before starting, I’d like to confirm your available TCAD and circuit simulators, existing baseline data, and the TFET architecture you want to prioritize. ? I recommend beginning with a validated baseline model before proceeding to advanced material optimization and circuit integration. Let’s define clear milestones and measurable validation criteria.
₹25,000 INR in 7 days
0.0
0.0

My 10+ years of experience delivering Python-based software and analytics solutions can support the computational side of your TFET modeling project, particularly analytical-model implementation, data processing, KPI extraction, calibration workflows, and visualization of TCAD results. I can use Python to translate supplied surface-potential, electric-field, BTBT, and device-performance equations into reproducible numerical tools, process simulation outputs, calculate metrics such as \(I_\text{on}\), \(I_\text{off}\), threshold voltage and subthreshold swing, and generate comparison and trade-off plots. My background building AI, analytics, business-intelligence, and decision-support solutions for 50+ businesses also supports structured data analysis and repeatable model workflows. My profile does not claim Silvaco, Visual TCAD, Verilog-A, or Cadence expertise, so I would contribute most effectively on the Python analytical and validation layer while keeping the implementation aligned with your semiconductor equations and simulation data. I am ready to apply my Python and analytics experience to this technically demanding TFET project.
₹30,000 INR in 7 days
0.0
0.0

I am ready to deliver your Advanced Analytical Model Development for TFETs within the specified ₹25,000 INR budget and 7-day timeline. Having extensive experience in VLSI device physics, TCAD numerical modeling (Silvaco ATLAS), and Verilog-A compact modeling, I can guarantee a highly accurate analytical framework that aligns with your numerical data under a < 5% error rate. Technical Execution Plan: • Mathematical & TCAD Modeling: I will solve the 2D/3D Poisson’s equation using the parabolic approximation method for DG and GAA architectures. Numerical calibration will be performed in Silvaco ATLAS enabling non-local BTBT (Kane's model), BGN, and Lombardi mobility models. • Gate & Material Optimization: I will model the DMG/TMG work-function steps to suppress ambipolar current. High-k dielectrics and III-V/2D heterojunction material constants will be optimized to achieve an SS < 60 mV/decade and \(I_{on}/I_{off} > 10^6\). • Verilog-A & SPICE Integration: The analytical framework will be converted into a fully functional Verilog-A compact model. I will benchmark this model at the circuit level for logic gates, a multi-stage Ring Oscillator, and a 6T SRAM cell to extract PDP and static/dynamic noise margins.
₹25,000 INR in 7 days
0.0
0.0

Bengaluru, India
Member since Oct 18, 2026
₹1500-12500 INR
$250-750 USD
₹750-1250 INR / hour
£250-750 GBP
$10-30 USD
₹400-750 INR / hour
£250-750 GBP
$300-400 USD
€250-750 EUR
₹12500-37500 INR
$750-1500 USD
£20-250 GBP
$2-8 AUD / hour
$30-250 USD
$200-600 USD
₹1500-12500 INR
₹37500-75000 INR
$10-30 USD
£20-250 GBP
$1500-3000 USD