Do a CFD Analysis for a room with a Patient who is sneezing & coughing

Hi Greetings! I am a Mechanical with expertise in CFD. I can use both SolidWorks and ANSYS Fluent for CFD. I have done projects that include CFD of Cyclone Separator, CFD of vertical axis wind turbine to optimize TSR, CFD of jet engine compressor for recovery of wake region, Design of wing to optimize lift, etc. . I have done projects related to FEA modelling, mechanism analysis, etc. Given my experience of CFD projects, I believe I am the right person for this project. For this project, I will use SolidWorks for 3d Modelling and for CFD I will use ANSYS Fluent. Along with CAD and analysis files, I will provide a rich technical report explaining the results and steps involved. Kindly contact me to discuss further. Regards,

CFD Engineer Expert! (I have a perfect skills with Transient and Steady State ! I have had a perfect skills to do it ,And send me your cad! &I will complete simulation for you ! So the steps from your work Step1: room has an entry for air and has also an exit with different pressure to absorb air from the room to outside.(Inlet &Outlet) Step2:

Hi there, I am a mechanical engineer with expertise in CFD. I can do sneezing patient CFD simulation. I can share my previous work with you. I use ANSYS fluent software. I am interested to do your project. Thanks and regards, Ishwar

Hello, Please take a look my portfolio related to CFD. You can find hospital room CFD analysis with three persons inside. Inlet and outlet air. I can simulate breathing of a person and add particals of water too.

Hello I am mechanical and aeronautical engineer with 6 years experience based on CFD at aerospace industry. I have been professionally using ANSYS Fluent and Star-CCM+ CFD tools for over 6 years too. I can perform the anlaysis you mentioned. Pls send me message via chat for further discussion. Regards

Hello I'm a Mechanical and Automation engineer and have gained experience in all 3 domains of CAx's I have read your requirement and would like to know better about it. Kindly check my profile portfolio for other Ansys projects. Thanks and regards

CAD designer with skills in ANSYS. I have done several simulations on ANSYS and would be will to work with you as soon as possible. Hope to hear from you soon. Can do a room simulations and the flow parameters can be determined for the air and dynamic viscosity

Hi there! I am a professional mechanical engineer, I have performed CFD simulations before. I am exceptional in performing calculations and simulations. I have done a simulation for the Corona Virus filter in Ansys Fluent with various parameters and iterations to optimize the design. Please reach in chat for a discussion :) Thanks & Regards Abhijeet Singh

Hi I am a mechanical engineer with 10 years of experience and can help you with this, read my reviews in my profiles and decide, thanks

Hi, I reviewed your project and interested to do it. I have enough experience in product design and CFD simulation with Solidworks and AutoCAD with CAD for 7 years+. I can provide you perfect results in a short time. I've previously worked on a similar project for another Clients. Please take a look at my Portfolios. https://www.freelancer.com/u/grigorevdevelop I would like to offer my services and skills to finish this project successfully. I hope to have a more detailed discussion through chat and looking forward to working with you. Best Regards, lurii G.

How are you? I am a mechanical engineer, and I am very interested in your project. I have many experiences in CFD using Ansys. If you give me your job, I will start working right now. Thanks for your attention

Hello there I am an engineer with experience in CFD over ten years. I can help you with this specific problem. A similar problem that I had handled in the past was a HVAC problem in a bus indoor environment. The amount of effort required is directly related to your interest area in the problem. It is an unsteady problem and computation time can be high depending on your needs. I believe if we discuss we can agree on an efficient approach. I have a couple of ideas. Regards.

Hello,Do you want to cfd simulation for hospital room who is sneezing and coughing? I suggest Control the inlet and outlet flow with different runs to eliminate the undesirable pressure gradient. and resolve hydrodynamic and turbulent model and watch result cfd post. I have a master's degree in mechanical engineering and have been working with software since 2012 Hope for your very soon reply. Best Regards,

Hello, i am ready exited to work you as i read your job description Do a CFD Analysis for a room with a Patient who is sneezing & coughing I am also an expert in making 2d,3d modelling and animating characters 2dautocad drawing ,elevation, solid work, Revit ,FBX ,Unity, Render also interior and exterior design. I have experience in field of more than 4+ years. I can Create Intro and Explainer Videos. for products and companies. Kindly check My Portfolio as well. Hope for your very soon reply. Best Regards, Azra Azeen

Hi, I am an expert on ventilation and interesting on your project. Please let me know if I can help you. Best wishes, Xiao Long

Hey there! I can help you with this CFD analysis and simulation and have completed a very similar task to this one. I am a Mechanical-Aerospace Engineer and highly skilled with CAE analysis and simulations using ANSYS / ABAQUS along with CAD designing using SolidWorks / CATIA. Do have strong core knowledge in the subjects related to my field and having a vast experience in CAD designing, Computational Analyses and high precise Manufacturing & Production of complex aerospace components and assemblies. ( please check my portfolio for more details on projects related to ANSYS & CFD ) I assure you that the results will meet your expectations and requirements with maximum possible accuracy and precision. Lets discuss further about the project details in chat. ( I can send you data from the very similar project to this one, once you initiate a chat) Best Regards,

Hello, I am an aerospace engineer, FSAE team (CURT) aerodynamicist, AIAA DBF Cairo university aerodynamicist, and CFD expert. I have a lot of experience with Ansys Fluent and the FVM for aerospace applications including external and internal aerodynamics and fluid. I have done a lot of projects that I can share with you if you are interested. I believe I have all what it takes for such job. I will be glad to help. Thanks

Hello Sir, My name is Sahil I have read your project details carefully. I can do this work very quickly and efficiently. I have Hands-on experience on real life projects in SolidWorks and Ansys. I have a experience of 4 years in SolidWorks and Ansys. so, I think I am a good choice to do this project. Thank you. I have done a lot of projects in Ansys just like this one.

Hello! I have completely read your requirements. I am Mechanical engineer and have 07 years of experience in CFD. So I have some important questions related to this and also have few suggestions. I am waiting for your message in that chatbox so we can discuss it in detail. Thank You.

Hello, I'd like to propose to your project. I'm a mechanical engineer with 5 years experience. I uses Anysy Fluent during my post-graduate studies to simulate and optimize the geometry plane wing. I'm more than confident I'd be able to finish the project in the required level and before the dead line.