Lighttpd openwrt trabalhos

Android app for access openwrt router , downloadable file you can get from . Please take a look for RPI4 version

This project consists in creating a customized page using LUA programming language to control a GPS device attached to a Raspberry Pi board. This new added page...added page will use JavaScript to trigger commands to start and stop the GPS logging service and to erase all logged files (.txt). JavaScript will interact with Lua to talk to OpenWRT system to control the service. I already have a working, customized, OpenWRT image and GPS. Using Material theme for LuCI as a starting point, this theme has been modified to fit our needs and we need this theme to be integrated to our customized image. This project is being built on a physical hardware, not sure if it's possible to emulate the same environment using VirtualBox or Qemu. We need a developer with some experience wit...

We need an experienced cryptography programming practitioner with prior proven capabilities to move portions of Java crypto code and other software onto a router using C or Go, under OpenWRT. Requires skills working with the ARM SOC under DPDK to optimize packet throughput performance. Experience with all aspects of multi-stage hybrid crypto, key exchange, authentication and complex packet address proxying a plus, along with strong communications skills to work with teams in California and India.

In this project, the openwrt has to be upgraded from 18.06 to 21.02, with the support of kernel 5.4.

We are creating a custom software package for OpenWRT and need to hire someone to help create a gui to make user experience more appealing

I am testing ppsk on hostapd and will need someone to build a custom hostapd package using this PR You do not have to know what ppsk is and even test it. I will help with that. Should be a quick job for someone who works on OpenWRT firmware.

There are two Open WRT routers as on the image: OpenWrt19.07.6-1 and OpenWrt19.07.6-2. Subnets are: , , wan interface: ping is working between subnets and , as well as I can reach the internet from both subnets. the issue: I can't ping from to , I can't ping from to I can't ping from to I can't ping from 5o as well as from 192. 168.2.0/24 to the internet (wan: ) Need someone to check the router's configuration.

i have few public IP on server and local is a openwrt router and its connected to server with a (openconnect) VPN tunnel. openwrt router IP: vpn server IP: now i can ping server to local and local to server. my server have few more ips are free now i want to use that IP on my local device like a device connected with openwrt router and i want to use a server Public ip on my local device. lets say set to a local device. my target is use server public IP on my local device. you need to route server IP to local over VPN tunnel so i can assign my server public ip to my local device that is connected with openwrt and openwrt connected to server over a VPN tunnel. i have same system running ON VIBE but vibe allowed only few models of router. also vibe hav...

I'm trying to sync files from a cifs mounted NAS on my Linux Mint system to my Nextcloud server. However, I'm getting the following errors:...problem writing to the storage on the server side." * From the client on the specific folder sync connection it says, "Unable to open or create the local sync database. Make sure you have write access in the sync folder." I have another folder sync connection which syncs the same data but is located on my hard drive and not an NAS. It doesn't run into any problems. The NAS is attached to an OpenWRT router and can be accessed via SSH. I'm not an expert but I'm guessing this might be a permissions issue? Whether it is or not, I'd like someone to diagnose the problem and see if there's a way to...

I need CoovaChilli() package built with specific flags. This will be built for MikroTik750gr3 (MediaTek MT7621AT ). Should be a quick job for someone who works in this space.

i have a openwrt installed router like tplink 3420 v5 now fastd install installed server & router both side. my server in USA and my router is france server have 8IPS like - but server useing only 1IP rest of 7IPS free like 23.23.23.3- now my france router have connected my linux PC so i want to issue a static IP to my linux server. and my linux server have to be get this IP from server. now any one from the world get access on this IP: cause its an public IP . when my linux pc get public IP then i can run any service as i want like SIP=5060 web=80,443 mysql=3306 etc like that. i dont want any port FWD service. i want my local linux pc have to get full real IP from my server. so when my linux pc offline i can see ping

I need to configure open vpn (that I have already )Config file with my router and need to Config firewall and put directory via ssh root and run the OpenVPN client in router

I need to configure open vpn in openwrt router any one technical skills let me know

I need some one who can install openwrt in mi 4a router if any one have talent please quote the price

Hello, We work with an OpenWRT Access point where the manufacturer has customized the sysupgrade process (with his own code). We need to understand how works the new process so we can slightly modify the code. What is needed is therefore to do reverse engineering so we can do a few changes. We will provide access to a computer which will be connected to the access point so you can try your code directly An OpenWRT specialist is needed. More details on what we exactly need to do will be provided Thanks

Hello We need to create a site to site IPSec connection between 2 locations location A : Sophos XG firewall Location B : OpenWrt on a raspberry Pi 3 - connected to the internet by wlan Needed tasks: 1. inform us about any changes to be made to the default IPSec policy in Sophos and guide us while creating the IPSec connection on Sophos. 2. Configure OpenWrt to connect to Location A. Thanks

looking for support in design a small 4G router that supports OPENWrt and a 4G RF module through a PCI interface.

Hi, firt of all we must understand if it is possible to install Home Assistant into a small OpenWrt router. If it is possible 1) i will buy Xiaomi Mi Router 4C N300 64MB 2) install together OpenWrt releases 21.02.1 on Xiaomi Router 3) install together Home Assistant 4) install together a plug-in to manage our electronic boards 5) test if everything works Thanks

I have two devices from Savari company (namely, roadside unit RSU and on-board unit OBU). These devices are similar to routers and their firmware is based on openWRT. Both devices have wireless network interface cards (NIC) that run a variant of WiFi called dedicated short range communication (DSRC). Additionally, both devices have ethernet NICs to directly connect to them. I would like someone to help me make theses devices relay packets received from the ethernet port through the wireless DSRC port. My topology is: laptop 1--> router 1 --> router 2 --> laptop 2. The laptop would send a packet to router 1 through ethernet. Router 1 forwards the message to router 2 using wireless DSRC. Router 2 relays the just received message to the final destination laptop 2 via etherne...

Hello, I need someone very familiar with the OpenWRT to build a custom router. Please bid only if you have experiance as it is a complicate job and don't have much time. Thank you

We're looking for a developer who is familiar with the Allwinner SDK (OpenWRT) for several fixes we need to implement (V536) - OTA script via recovery partition - WebRTC video streaming Thanks,

Hello freelancers, I am looking for an Flutter expert who can help me optimizing the code and UI of my new flutter app. I am a flutter beginner and started with a new personal app to monitor sensor data of my caravan from scratch. The app is working currently on a single page but should be extend...Flutter Expert with deep and up-to-date knowledge about BLoC (eg. ); - Development must be done directly in my bitbucket git repository; If you have the following skills, this will increase the chance to get the contract: - Knowledge with mosquitto MQTT broker and general knowledge about the concept of MQTT; - Skills in python development; - Knowledge in openwrt firmware development; This is not to be seen as a one-time job. Best regards, Juergen Weiss

We need to install the following python v3.9 packages on a device running a TIP OpenWifi firmware v2.2 (): - nfstream v6.3.3 - lightgbm v3.2.1 The toolchain for that firmware uses GCC v5. The device we're trying to get these working on is this:

Build a fast, simple, cross-platform centralized secured instant messaging and voice-over-IP service calling app. Technology to use are listed below Erlang OR Java Php XMPP (Ejabberd) Mnesia OR Oracle lighttpd FreeBSD Yaws

It is about getting a build for all OpenWrt compatible devices by integrating a custom CoovaChilli version. Coovachilli modification is already done. It would just be the build for all supported devices on the OpenWrt page.

...that is under OpenWRT control. In order to work a client application (written by our company) needs to open an UDP socket secured by DTLS protocol to the server application (provided by a third party company). Problem description: After migration of server application to its newest version we have encountered a problem with establishing connection between them. Server actively refuses connection on DTLS handshake stage. We have discovered that when we run server application on a separate board (BeagleBoneBlack with Ubuntu onboard) and make our client app to connect to it remotely the problem does not occur. Expectations: We need an expert to analyze and solve the problem so we will be able to run both client and server applications back on the same Mediatek board under Ope...

Hi, I've read this and I want to do the same. https://www.freelancer.com/projects/linux/Install-proxy-Openwrt-31473356/proposals Would you please do it? Thanks

Thanks for reading, we have a problem to solve as below: 1. We are running Asterisk IP PBX soiftware on MT7628 Cpu running OpenWRT 2. For audio we are using PulseAudio and we have some problems: 2a - The echo cancel algorithm for the on-board speakerphone gives echo to the distant end, i.e. the echo cancel is not fantastic and needs looking at 2b - We are struggling to play recorded audio over our speaker 2c - The PulseAudio always requires a second reboot to work properly. If you are an engineer with solid experience in this area we would appreciate assistance on solving these items.

I am looking for an expert who can collaborate as openWRT backend developer with my original frontend developer. I am willing to provide up coming jobs continuously if you successfully deliver this first job.

Hi, Wants to install Shadowsocks on our alibaba cloud server and configure it to our local router which has openwrt and Shadowsocks installed. We want certain local IP address internet traffic to go through the Shadowsocks

Hi, Wants to install Shadowsocks on our alibaba clould server on port 443 and configure it to our local router which has openwrt and Shadowsocks installed. We want certian local IP address internet trafic to go through the Shadowsocks

I would like to install the 3proxy application on my ESXI with the OpenWRT system. The freelancer must write a short instruction on how to do it next time.

...router and to the VM to bond at the datacenter. The purpose of that bonding is to have a faster and reliable layer 2 connection between 2 sides. For bonding to work correctly there is a VM available at the datacenter. See the links below for the type of bonding we need: (there are images for other hardware but not for Mikrotik) In order for the candidate to receive the payment for this task we should

Aliyun DDNS module in OPENWRT old IP record is not deleted automatically while a new resolution record is added I have to manually delete old ip records in the ddns service provider console

Hello, I have openwrt firware that was customized my for hotspot. Firmware is fine fully working for over 2 years. I need now 2 adjustments: - increase up/download speed which is statically set to 1/3 megabytes (I know this is just update the values at a file but I dont know how to generate new image after it), although I have the full "generate image" enviroment fully set. - when my routers are turned on, they do a http to downoad a few configurations (network name, channel, very basic stuff). I want to add a condition in which after 5 minutes it is turned on, if one of the parameters it downloads is set to "off" it will turn of the wifi interface . I need this for routers in which I dont use the wifi, just the LAN ports.

Hi, Need help with getting the below python v3.9 packages working on openwrt v19.07 (and guidance on how we can do it ourselves for future packages): nfstream v6.3.3 lightgbm v3.2.1 The device we're trying to get these working on is this: Appreciate your help, thank you.

Hi, Need help with getting the below python v3.9 packages working on openwrt v19.07 (and guidance on how we can do it ourselves for future packages): nfstream v6.3.3 lightgbm v3.2.1 The device we're trying to get these working on is this: Appreciate your help, thank you.

Hi Rumon C., I noticed your profile and would like to offer you my project. I need a simple proof of concept captive portal page for Mikrotik or OpenWRT that sends and receives information from MQTT topics (with javascript client or similar solution: ). Please let me know if you have available time to discuss further details of the project. Thanks.

We are looking for someone to be able to compile this code: (based on openwrt) and deploy it on our access point (remote access can be provided if necessary). In addition to the above, the access point physically comes with a NOR flash and a NAND flash installed. The NOR flash is what we are working with right now but the NAND flash is not configured/formatted on the OS level so it is not visible to us. We need that NAND flash to appear on the OS level and be available to us as storage. Thank you.

The NAS is mounted to my router as far as I can tell and my fstab file is configured with the correct UUID numbers but my NAS isn't accessible in my file browser every time I reboot. I had this same setup working before with a different OpenWRT router but I'm not having much luck with my current router. I use AnyDesk or TeamViewer for remote assistance.

We are looking for someone to be able to compile this code: (based on openwrt) and deploy it on the Edgecore EAP101 access point. In addition to the above, that person should also be able to mount the NAND flash (that comes with the access point). Thank you.

I need build openwrt from source.

Rewrite 3 .htaccess from Apache mod_rewrite to lighttpd.

- View, edit VPN Ipsec site to site parameter - View ipsec status

First - do not message me, just Bid I will delete any bids from anyone who sends a private message!! We have a project using MT7688/7628 and require someone who has LCD and LVGL (Light and Versatile Graphics Library) experience to implement some screens for us using a simple API. The full set of screens so far is shown here but we initially only need a small selection. Please let me know your experience in this matter, there will first be a small test project and then based on success we will implement a larger longer term project. Thank you

I have Xiaomi router done all openwrt configuration, just need to configure to receive wifi as Internet no need WAN port

Hello, Im looking for OpenWRT UI developer. Project description: LuCI customization. Skills reguired: lua, javascript, html, ubus.

We need to develop an MVP as follows: - A cloud based dashboard to remote control and manage simple task on WiFi Router as: Status, LAN speed, number of clients connected to WiFi and speed, see and edit WiFi SSID, Password, turn on off, reboot, etc. - A openWRT package/agent able to send and receive info to the management cloud. More info available

Por favor, Cadastre-se ou Faça Login para ver os detalhes.

We have a hardware from M5Stack namely core 2 , fire and atom () based out of esp32 chips .This can run micro python , arduino sketch and C. We have a code based on ANSI-C which is successfully compiled and running in X-86 Linux/Windows and ARM RaspberryPi and openwrt. We need to port the same as mentioned here ( changing headers ) cross-compiling to esp32 The objective is to compile and debug the code also provide documentation on how it is done. Details shall be provided through DMs