Rabbit microcontroller trabalhos

This Project is for ESP32 controlled 16 switches, Smart Switch Board. Below are the requirements. 1. ESP32 should act as web server and should be able to communicate via router. 2. There should be a provision to send http request to on/off the switches on demand. 3. ESP32 should be Integrated with Alexa and/or Google Assistant 4. Need scheduling feature as well on ESP32, the code should be able to receives over the air request to set scheduling on a single or combination of switches. 5. The code should be able to set multiple schedules and store it in ESP memory. 6. The code should use both cores of the ESP32 for faster performance.

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....

A) I need a Smart Mirror schematic (Size: height = 150 cm, width = 50 cm) The Smart Mirror must include: - Multitouch (touch panel) - Camera - Circuit - Power - Lighting (LED: Top + Left + Right) - Wifi, Bluetooth & other sensors - 2 x USB C port - Storage - Speaker B) 3D export of the schematic Note: No BOM list required thus the specifications on the schematics ...Smart Mirror schematic (Size: height = 150 cm, width = 50 cm) The Smart Mirror must include: - Multitouch (touch panel) - Camera - Circuit - Power - Lighting (LED: Top + Left + Right) - Wifi, Bluetooth & other sensors - 2 x USB C port - Storage - Speaker B) 3D export of the schematic Note: No BOM list required thus the specifications on the schematics can be just indicated generically as microcontroller, ...

Embedded System GYRO, ACCELERO, MAGNETO AND GPS USED TO CONTROL THE POSITION OF DEVICE. EXPERIENCE IN 16/32 MICROCONTROLLER AND DIGITAL CIRCUIT DESIGNING, C & C++ PREFERRED: DELHI NCR

Hi, I am looking for a C library for creating LED panels with dynamic text and graphics, I use PIC microcontroller. Please quote only if you have done this kind job job in past and have most of it ready and only porting is required. I would require user guide / API docs also

Use ICM-20602 to calculate the vertical and horizontal position of the device as its moved in free space. The key challenge is to combine outputs fr... 1g, 0) and gyro outputs are 0. 4) Code to extrapolate the current position (vertical and horizontal) by using the readings since initialization. Please note that the device fitted with ICM-20602 might rotate, so the vertical and horizontal values should be relative to ground. * Output, should not drift position when stationary. * Communication to ICM-20602 will be done using SPI. * Host Microcontroller is the nRF52840 * Output needs to be responsive and accurately reflect the path moved in free space. An extension to the project utilizes the 7-Axis ICM-20789 to improve on the above - previous experience with this device is highly ...

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....

Looking for remote working embedded software developer part time or fulltime(Area Preference: India(Gujarat)) Min 4 to 6 years of exp. in embedded system development Excellent Programming Skills in C & C++ Board bring, device driver development, BSP & Linux Kernel programming skills Understanding of various processor and microcontroller architecture i.e. Cortex-A series, ARM series processors etc. and other general-purpose microcontrollers Excellent understanding of wireless connectivity like Wifi, 4G, BLE, Zigbee, LoRaWAN etc. Good past experience in IoT device projects Good Debugging skills and hands on with coding and tool usage Working experience of on bare metal, RTOS, device driver development Salary Range: 30K to 60K INR/Month(No bars for right candidates)

Hi, I am looking for someone with experience coding in C using MPLAB X IDE. The scope of work is included in the attachments. You will require the free software specified in the links below, versions are VERY important and an installation guide has also been attached. MPLABX version 5.40 XC8 C Compiler for PIC18, Version 2.20 PICSimLab V 0.8.6 MPLABX Plugin for debugging on PICSimLab V5.45

Hi, I am looking for someone with experience coding in C using MPLAB X IDE. The scope of work is included in the attachments. You will require the free software specified in the links below, versions are VERY important and an installation guide has also been attached. MPLABX version 5.40 XC8 C Compiler for PIC18, Version 2.20 PICSimLab V 0.8.6 MPLABX Plugin for debugging on PICSimLab V5.45

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....

I want get to output video from microcontroller m430f449 on Arduino and display the information received from the microcontroller on the computer. The data received from the microcontroller includes numbers and characters Microcontroller datasheet was attached. Someone can help me in the process of doing this? I'm somewhat familiar with electronics and hardware and Arduino and just need help getting the job done.

I need to write a program based on the STM32F4 microcontroller and the NFC chip ST25R3916 or ST25R3911B. The program should implement work with the phone (Android and IOS) and work with NFS cards. The program is required to be able to read data from physical cards and to transmit and receive data from the phone (NFC TAG or NDEF messages).

I need you to design a controller that accomplishes a few basic functions based a sequence of momentary switch inputs: (One press: ON - Activate Relay A and Relay 1,...momentary switch inputs: (One press: ON - Activate Relay A and Relay 1, Two presses: ON - Activate Relay A and Relay 2, Three presses: ON - Activate Relay A and Relay 3, Four presses: OFF - turn off all relays): -Relay A controls a separate controller board that powers an electric motor. -Relays 1, 2, and 3 connect a +12V pin to one of three different outputs. -Additionally, the main microcontroller will receive an input between 10.5 and 14.4V. Based on this input (we have a simple tiered formula), the board needs to output a signal between 1 and 5V (we have the formula pre-determined. It is linear and very very...

In this project, we will implement a Proportional Derivative (PD) controller to control temperature using the Romeo MCU board and the Temperature Control Board (TCB) . All code must be written in C and must compile using AVR software. Hardware required Kits: ● Romeo Microcontroller Kit: (Kit1) ● Temperature Control Board from the PID Controller Kit, (Kit5). Additional Hardware: - Tin foil/Aluminum, Tap - Thermometer (optional) Project details This project is broken into three sections 1) Controlling the heat source – For this project, we are using the incandescent bulb on the TCB as a heat source. We are going to use the motor driver on the Romeo board to direct power to the bulb. On the TCB, there are 2 pins labeled bulb. Connect them to either M1 or M2 on the Romeo board (p...

Using a ST Microcontroller model STM8S with 32K Flash. Need to implement a boot loader in the code using SPI or UART interfaces for field upgrades. Interested in upgrading multiple devices at the same time.

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....

Kami membutuhkan freelancer yang bisa membuat hardware dan software menggunakan microcontroller arduino. Fungsi perangkat ini: 1. Dapat membaca suhu dan kelembaban menggunakan sensor AM2302(Versi kabel dari Sensor DHT22). Tampilan display 7 segment 1.2 Inch CA. Suhu 3 digit, 1 angka di belakang koma. Kelembaban 2 digit 2. Dapat membaca tekanan menggunakan sensor MPX2010. Tampilan display 7 segment 1.2 Inch CA 3 digit 3. Dapat menampilkan jam saat ini menggunakan tampilan display 7 Segment 2.3 Inch CA 4 digit 4. Counter Down menggunakan tampilan 7 segment 1.0 Inch CA 6 digit Semua komponen kami sediakan

The unit should measure the fabrics meter It has proximity sensor interfaced with microcontroller, 16*2 lcd interface, Rs 485 ,4 push buttons ,on board leds 2 interface with mcu, 12 V input to the board , 5V LDO 7805, to lcd and mcu .

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....

I am looking for someone to come up with their own idea to work with microcontroller.

Electro-Technik (Systems) Ltd. are looking at the possibility of subcontracting the design and writing of embedded software to up-grade an existing project based on an Atmel AT-Mega2560 microcontroller. The unit to be programmed is an aircraft activity logger. The AT-Mega2560 based hardware already exists and approximately one hundred units are in operation. On board peripherals include GPS /GNSS / GLONASS receiver (u-blox) Cellular 2G and LTE modem (u-blox) Sound level monitoring Altitude (atmospheric pressure) monitoring Vibration monitoring (3 axis accelerometers) PSU with Li-Po battery charging Non volatile memory (1Mb) and RTC The function of the module is to record the time at which aircraft events occur and at the end of the flight to send a record of these times v...

I have a breadboard and LILYGO® TTGO T-SIM7000G Module ESP32-WROVER-B microcontroller , and i have TMP35 ( temperature sensor ) , and PMS5003 ( Particulate Matter Sensor ) , and i have microphone Sensor ( Sound Detection Module ) i want a schematic to how i connect the sensors with the ESP32 microcontroller Also i want a programing code ( i will add it to Arduino software ) to connect all the sensors and make them run smoothly on ESP32. i want the project done as fast as possible.

I need help with someone teach me how to program and learn with rx63n microcontroller embedded system who can program it and familiar with rx63n.

Ive just started a gaming youtube channel and im looking to have someone design a panda character for me for my youtube as i will be wearing a panda mask while playing and streaming preferably something similar to ( design a panda character for me for my youtube as i will be wearing a panda mask while playing and streaming preferably something similar to () but with a panda face instead of the rabbit.

GYRO, ACCELERO, MAGNETO AND GPS USED TO CONTROL THE POSITION OF DEVICE. EXPERIENCE IN 16/32 MICROCONTROLLER AND DIGITAL CIRCUIT DESIGNING, C & C++ PREFERRED: DELHI NCR

Our team has been made an SPO2 measuring device for the end-user, and we designed PCB and coding of the device for this purpose, but we need some modification to convert the microcontroller version from STM32F407 to STM32f030 and some modification on coding for increasing speed of calculation and also some modification on filtering input signals, please message to our team for more details and negotiation.

I need a software audio decoder implementation based on STM32F4 microcontroller. You need STM32F4DISCOVERY to work on a project. IAR EWARM is preferable. You can use open source projects to port it to IAR and Discovery. No need of RTOS, Ethernet, mp3, display and so on... You can also use FATFS to play files from SD, but playing music files converted to *.h (header) files also allowed. The result of a work is a source file and IDE project files to build the project by myself and playing WMA on my STM32F4DISCO.

One needs to use Romeo Microcontroller to build the PID project for detecting temperature followed by actions in arduino.

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....

MULTIPLATFORM DESKTOP APP (ACCEPTABLE .EXE OR WEB SERVICE). Aim: - 2 windows = maps. Each one with tables and its corresp...the values ​​of the table that the users fill in. Functions: - "WRITE / WRITE" button. Send the arrays, two maps, two flaps, by USB port to external microcontroller. - "READ / READ" button. Read the data from the external microcontroller through the USB port. - "Open" icon. Open a previous project where the array has been saved. - "Save" icon. Save a project, save the array. - "Connection" icon. Set connection values ​​in default baud and or manual, Choose default COM port and manual. - "Print" icon. Allow to print the 3d graph together with the values ​​of the table on the screen. Clarificat...

I am looking for someone to come up with their own idea to work with microcontroller.

I need help finding a microcontroller that can record audio. I have tackled this problem with an arduino but the sample rate is super low. And I been been using a Electret Mic + MAX9814 Amp I would really like to start using some type of mems microphone instead but every time I look into recording audio and micro controllers I can only find arduino projects. Any help on finding a popular microcontroller that will record audio at a high quality rate easily would be appreciated. Side note I would like for it to either record to an sd card or to have enough on board storage to record for roughly an hour.

Programme for renesas rl78 family r5f100lea 64 bit microcontroller used in laser guided land leveler

I want to get Brain wave data from 4 of 8 channel ADS1299 and save it on sd card and also send it in with wifi to PC at the same time with ARM also I have a sample software to give data from wifi from STM32 that we can try it with ...want to get Brain wave data from 4 of 8 channel ADS1299 and save it on sd card and also send it in with wifi to PC at the same time with ARM also I have a sample software to give data from wifi from STM32 that we can try it with it. each channel is 24bit and each of them has a minimum of 250 samples per second. I find some information from the OPENBCI project but they do with PIC microcontroller but I want to do it with STM32 in 32 channels. I think we need to use a pipeline in STM32 coding to have complete data without any delay or lost data.

I am looking for someone to implement 3 component with microcontroller and code. Any idea they can work on , that is not specific one

I am looking for someone who can help me with microcontroller pic32mx150F128B and using few things and also write code in MPlabx

Need help with assignment. easy task. pic microcontroller configuration and coding need little explanation as well and any reference related to it I'm going to select someone after couple of hours. need to be finished in 24hrs.

Hi there, I would like to build small devices that are able to send the location *when* the device is moved (so a shock component must be added), I am happy for the device to have a sim card tray as I feel the best way might be send location over 4G. The device will need to be smart, and will need to use low battery when it is inactive, however once movement is detected it becomes active. It should feed in to a system (perhaps firebase) whereby users can see the location of the controller via their app. The device must be *small*, and there is an opportunity to turn this in to a PCB. Would appreciate some python/maps knowledge too.

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....

Embedded C/C++/Assembly Language Programmer required to program existing (ATmega128 microcontroller) based board to achieve specified functionality. It is an industrial equipment (BLDC Motor) used for various fastening and Machining operations. Earlier another person was working on the project but he had to leave it midway due to some personal issues. Now we are left with an almost-finished equipment which is mostly non-functional. The PCB on which you will be working on, is supposed to achieve following tasks: 1. Get a HIGH/LOW signal from target equipment and give output signal of HIGH/LOW as per the given conditions. 2. Detect a pulse coming from the target equipment and give HIGH/LOW signal as per the detected pulse. 3. Perform some calculations, display some results ...

We would like to build a web service(site) that allows microcontroller code to be edited online and then uploaded for compilation. Quick and dirty prototype/MVP. Preferably in Python and supported frameworks. Need login screens, basic user management. Ability to edit, save and load code (from the our service), and send and retrieve the compiled file (backend compiler will be emulated). Allow user to download the file locally. Bonus feature if you can create a chrome extension that allow the file to be sent to a device (arduino, or microcontroller) serially. We would like to use the Monaco (open source) editor. Some modifications to the editor may be required to select target devices. More information will be provided to shortlisted candidates. This project ...

StratoLit IOT startup. Current developing a all-in-one weather station. Hiring freelancer dev for DSP libraries for a STM32F4 microcontroller using the STM32 Cube / STM32CubeIDE environment.

A cola company needs a HAPPY EASTER ad. An ad that was done last year is attached. We need something with a rabbit and the company's cola bottle. Cola bottle is attached. Size: 1080x1080 Thank you.

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....

Por favor, Cadastre-se ou Faça Login para ver os detalhes.

Looking for a skilled person who is capable of designing / making / consulting on a portable IMSI /IMEI / GSM / 4G LTE Catcher device that is mobile (Use in a car and in the field) - meaning, once the unit is activated, it will receive all IMSI data of neighboring Phones and the ability to track specific phones when requested (aggressive). In order to complete such a ...and records and deciphers it using a A5.1 decipher unit which is connected to the system. Makes fake calls. Skills Required Telecommunications Engineer, C Programming, Computer Security, Embedded Software, Engineering, Linux, MySQL, PHP, Software Architecture, Software Testing, Web Security, Python Script, MAT LAB, ASTERIX Hardware. Skills: Wireless, Electrical Engineering, Electronics, Microcontro...

**Bidder have to discuss their approach and module to be used ** Hi , Im a software engineer looking for a microcontroller engineer to Build a prototype for a device to communicate with a mobile phone with these features 1. send signals from mobile to microcontroller to start/stop/adjust the speed of the motor 2. GPS and speed information to be sent regularly to mobile phone to track microcontroller 3. Voice communication from mobile to the microcontroller distance should be around 1KM and 2 devices are mobile Freelancer should provide & advise required HW, required chips design. Please check the attached document for detailed requirement

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....

...recruiting the right candidate for this project. Therefore, if you were to pass this test and if you were to want to use C/C++ on Arduino I would allow you to work with me by using C/C++ on Arduino. But I suppose within a few months I would be able to persuade you that MicroPython on ESP32 would be better for this project. ✻ DESIRABLE BUT NOT REQUIRED ✻ Python, Java, JavaScript, C++, C#, .NET, microcontroller, IoT, electrical engineering, circuit design (PCB design), mechatronics, and/or electronics....