temperature controller with PIC (simulation and hardware guidance)

$10-30 USD

Concluído

Publicado

há aproximadamente 2 anos

$10-30 USD

Pago na entrega

need someone to build for me the following project on PIC microcontroller and simulate it on Proteus should read data from three ds18b20 sensors should get and upload data through Bluetooth to a mobile app (app already made just need PIC side code) should control 2 relays (heaters) to match the desired temperature. should display the current temperature of all temperatures sensors as well as desired temperature on a 20x4 lcd display NOTE: the service provider must guide me on how to implement this project. also they have to provide a completely working proteus simulation. I have components needed. PIC16F876A, PIC18F4550, PIC16F887, PIC18F452 (you choose one from the list) dual channel relay module hc-05 (for handling bluetooth) 3 ds18b20 temperature sensors 20x4 lcd display (i'd prefer to control this display with i2c but whatever is the easiest for developer is alright with me) once this is done i will further build up on it and will require developers help wherever needed. NOTE: I need this done in two days. i am also a freelancer and this is a client's project. need this urgent in 2 days. people who don't have enough experience with PIC please don't offer.

Electronics

Microcontroller

Arduino

Electrical Engineering

PCB Layout

ID do Projeto: 33492527

Sobre o projeto

10 propostas

Projeto remoto

Ativo há 2 anos

Quer ganhar algum dinheiro?

Endereço de e-mail

Benefícios de ofertar no Freelancer

Defina seu orçamento e seu prazo

Seja pago pelo seu trabalho

Descreva sua proposta

É grátis para se inscrever e fazer ofertas em trabalhos

Concedido a:

@soltracker

easy task already done........................................................................................

$15 USD em 1 dia

4,8

(83 avaliações)

5,0

10 freelancers estão ofertando em média $45 USD for esse trabalho

@Devpro11

Dear Client. Thanks for posting this project. We are very pleased to bid for your project. Your project requirements were really interesting and I am 100% sure that you can complete the project. I have experience in hardware and embedded system design and can help you with: - Firmware and Device design (Arduino, ARM, PIC),Various C/C++, Solidworks - Electronic circuit design (power electronics AD/DC, DC-DC converter and SMPS, power divider, switch and power supply, low noise amplifier design, analog filter design. Antenna, high-speed data communication, LED lighting, motor control, USB, USART and RS232 communication, ...), PCB design and layout ... I can focus entirely on your project and complete it in a short time. I would like to have a specific discussion with you about the details of the project. Thank you in advance. While i'm watching

$60 USD em 2 dias

4,9

(25 avaliações)

5,8

@sikanderabbas48

I Will Provide services of Arduino, ESP32 and ESP8266 from basic to high level programming. I have done more than 500 projects. Which are related to Arduino, ESP32 and ESP8266. Hardware : ESP8266 Arduino Family ESP32 Software: Proteus Matlab MPLAB Arduino IDE Family Sensors: I have worked almost all kind sensors Temperature, IR, Smoke, Humidity, Gas , Pressure, Optical, Proximity, Accelerometer and Gyroscope etc Wireless Modules; HC-05 ,HC-11, HC-12, Xbee, Zigbee, LoRa Feel Free to contact with me any time

$20 USD em 3 dias

4,8

(26 avaliações)

4,4

@engmahmoudsaber3

Welcome Sir I can help you in successfully completing your project.I am an embedded systems programmer. I am an expert in the Arduino field. I have done many similar projects for this work. Send me all the details. Here are some of my work I unveiled an integrated Arduino smart control system at Nestle Ice Cream Company I made a car robot that avoids obstacles I made a Bluetooth controlled robot and showed me its location on the phone I made a Wi-Fi-controlled robot I made an integrated smart control in a mini city I made a robot that is used for protection and it shows me the temperature and humidity of the place and it also shows me the percentage of gas in the place and can send me the percentage of lighting in the place and the distances around it -c/c++ -Drones circuit Design -fritzing -proteus -Tinkercad -PCB design -plc -cad

$30 USD em 3 dias

4,6

(20 avaliações)

4,2

@ozdemirmcihad

HELLO; I am working as a research and development manager in a private company. I have more than 5 years of experience in embedded system software and hardware. As for software, I am proficient in microcontrollers such as STM32, MICROCHIP, NUVOTON,ARDUINO,ESP32,MSP430,RASPBERRY Pİ. I have experience in communication protocols such as CanBus, ModBus, RS232, RS485, TCP IP, Socket Communication. I am an expert in Altium and KiCad programs in hardware. I have read and understood your project. Please write to me for details.

$110 USD em 2 dias

5,0

(1 avaliação)

1,7

@aliafzal0125

Hello Sir! I'll do it just inbox me then we discuss further details. I am a skilled Mechatronics, Electronics, and Control Engineer with three years of expertise in the area. I have extensive expertise with Microcontrollers, PLCs, and SCADA systems, as well as control systems, machine and circuit design, and automation. I am known for my attention to detail and precision in the handling and manipulation of automated equipment control systems. Furthermore, I have a demonstrated track record of excellent communication, having served as a liaison between diverse teams, including design, manufacturing, quality assurance, and machine shop floor employees. I have huge expertise in: o Arduino o MATLAB o LABVIEW o Machine Learning o Machine Vision o Neural Networks o Machine design (CAD/CAM design) o IOT (ESP32, ESP8266) o PCB Design and Layout o Artificial Intelligence o Proteus o Multisim o AutoCAD o SolidWorks

$50 USD em 2 dias

5,0

(2 avaliações)

1,3

@Alihassann00

Here is a Telecommunication Engr will provide you a 100% satisfactory work. I have already worked on a lot of projects relating MATLAB, SIMULINK, PROTEUS, ELECTRONICS, ELECTRICAL, ARDUINO, C Programming PYTHON, MICROCONTROLLER, PCB LAYOUT, MECHATRONICS, EMBEDDED SYSTEM, ROBOTICS and MOTOR CONTROL as main skills. Feel free to contact Regards Alihussain

$100 USD em 3 dias

0,0

(0 avaliações)

0,0

@moneashish

Hi , i am in the field of Embedded Electronics for the Past 10 years and worked on various platforms. i have a huge experience in designing the hardware schematic , PCB layout and firmware application in C language. i have developed various products in the field of medical , industrial and iOT applications. Microcontrollers :- PIC16, PIC18 , CC3200 TEXAS Instruments, Microchip , Renesas, Arduino , ESP32 Softwares :- MPLAB, Eagle , CS+ (Renesas) , Arduino , e2 Studio Applications :- Medical equipment such as inhaler, spiro meter. Industrial applications such as submercible starter , furnace application, induction heating , Home automation products. i can deliver your project as per your requiremenet. and also i can help you develop the product. Thank you. Ashish Mone.

$20 USD em 1 dia

0,0

(0 avaliações)

0,0

@djalltra

Hello ,I've gone through your project description and can deliver the project within the shortest time frame,I have years of experience working with pic microcontrollers and I will be using the mikroc software for your project. I will deliver all files which includes Proteus simulation,C code,and schematics. Thank you.

$25 USD em 1 dia

0,0

(0 avaliações)

0,0

@ahmedalabsi300

I'm a mechatronics engineer and a programmer I have skills in MATLAB, Embedded system(pic-arduino-esp32/8266), PLC(Siemens,Logo,Lovato) Solid works, Networking, Developing android apps,and Programing (C++,Python,Java,Java Script,PHP). I have experience in all previous skills. I can offer you excellent work before deadline. I have experience of 5 years in previous majors. I also have skills in project planning, data entry, Microsoft word-excel and typing. I'll be happy to help you... Please contact me...

$20 USD em 7 dias