Comsol femap ansys trabalhos

Preciso de alguem que faça para mim a analise de flambagem no ansys para diferente colunas, determinando a carga critica de flambagem linear e não linear. Algo semelhante a esse trabalho que anexei mas com as colunas que eu estou analisando.

tenho já o desenho do volante no solidworks e agora preciso de uma simulação FEA no ansys que valide meu modelo.

Olá Alexandre, Estou procurando projetista mecânico com experiência em Ansys. Trabalho: Com base em desenhos 2D, deve ser modelado a estrutura no Ansys, realizar o carregamento do modelo, vinculações, interpretação dos resultados e elaboração de relatório técnico/memória de cálculo. removed by admins

Olá, Estou procurando projetista mecânico com experiência em Ansys. Trabalho: Com base em desenhos 2D, deve ser modelado a estrutura no Ansys, realizar o carregamento do modelo, vinculações, interpretação dos resultados e elaboração de relatório técnico/memória de cálculo. (53)98131-4036

Olá Vinícius, Estou procurando projetista mecânico com experiência em Ansys. Trabalho: Com base em desenhos 2D, deve ser modelado a estrutura no Ansys, realizar o carregamento do modelo, vinculações, interpretação dos resultados e elaboração de relatório técnico/memória de cálculo. (53)98131-4036

estou realizando uma monografia em engenharia mecânica e preciso de uma consultoria para o uso da ferramenta ansys. a simulação é utilizando o método FSI-2WEY do transient-strucutal com o fluent para um estudo de uma simulação de um aneurisma

Preciso da programação mediante o método MCRT para modelar a radiação solar no programa ansys fluent UDF, forneço pdf adjunto com mais detlahes.

Bom dia! Estou fazendo doutorado em Eng. Mecânica e preciso de um modelo matemático, desenvolvido em elementos finitos e ANSYS, para comparar os resultados obtidos nesse modelo matemático com os resultados obtidos no laboratório. O objetivo de minha tese é avaliar a adesão entre dois materiais unidos por aspersão térmica. Os materiais não são exatamente colados. Um material (Revestimento- uma liga) é aspergido sobre outro (substrato- aço carbono 1020) pela técnica de aspersão térmica por arco elétrico. Basicamente um arco elétrico derrete a liga (revestimento) e projeta contra o substrato, q ao se chocar com ele se solidifica novamente formando um revestimento. A t...

Por favor, Cadastre-se ou Faça Login para ver os detalhes.

O projeto consiste em realizar análise modal em um casco simples de uma embarcação de 22 metros.

O projeto consiste em realizar análise modal em um casco simples de uma embarcação de 22 metros.

Fazer avaliação no Ansys e o relatório assim como pedido.

Projeto de Máquina para Lavanderia Industrial Trata-se de uma máquina de Lavanderia industrial já está no mercado há 10 anos, com projeto superdimensionado tanto em sua estrutura metálica, bem como carenagem e fechamentos. Precisamos otimizar este...metálica, bem como carenagem e fechamentos. Precisamos otimizar este projeto de modo a reduzir no mínimo 20% em matéria prima. Para isso, buscamos um engenheiro mecânico que esteja atuando na área de projetos com análise Estrutural e Dinâmica com experiência de no mínimo 5 anos baseados no Método dos Elementos Finitos – CAE (Computer-Aided Engineerig) utilizando os softwares consagrados como: Ansys, Nastran, Pat...

Preciso de alguém que faça a análise estrutural de um equipamento industrial de modo a otimizar matéria prima que notadamente está superdimensionado no equipamento atual. Utilizar os softwares de analise estrutural (FEA) para análise de tensões, vibrações e ruídos com softwares consegrados como Ansys, Nastran, Pro-engenier. De preferência que resida em Curitiba ou região.

AMSYS project as discussed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Realizar um projeto acadêmico de um sulcador no Ansys

Private as discussed.

...thermal analysis and simulation to work on a project related to Li-ion batteries. I have already done some work. I don't know about battery modeling on ANSYS Fluent. I am trying to mimic TR using a thermal model. The geometry and the parameters are taken from the research paper (the research paper is attached). I propagated TR using a user-defined function (UDF) on ANSYS Fluent, but I couldn't get a higher cell temperature than the one mentioned in the paper. The UDF contains the data points and Time extrapolated from the research paper (Fig. 5). The heat generation is calculated using q''' = rho*Cp*dT/dt. (The work should be done on ANSYS Fluent). Key Tasks: - Conduct detailed thermal analysis and simulation on a Li-ion battery. - Show...

I have designed a model of a Kamps jet engine and I am now seeking an expert familiar with ANSYS software to simulate its operation. The primary fuels I am interested in are JetA and biodiesel. Understanding the performance of these fuels in relation to thrust, efficiency, fuel consumption, and emissions is of the utmost importance. This will be used for personal reasons. Ideal candidates for this project should have: - Proficient experience with ANSYS software - Understanding of jet engine operations - Knowledge of jet fuels (particularly JetA and biodiesel) The deliverable for this project will be a comprehensive report detailing the simulation results with comparison and analysis on the primary parameters: thrust, efficiency, fuel consumption, and emissions. Please note...

Create a First Task for 3 beams according discuss with us

I'm in need of a skilled freelancer to perform a mathematical calculation and 2D steady-state heat transfer simulation. The simulation will be conducted on a metal plate subject to convection boundary conditions. For this task, I would prefer the use of ANSYS software. Key Requirements: - Conduct a 2D steady-state heat transfer simulation - Work with a metal plate material - Apply convection as the boundary condition - Utilize ANSYS software for the simulation Ideal Skills: - Proficient in ANSYS software - Experience in conducting heat transfer simulations - Understanding of convection boundary conditions - Background in working with metal material properties in simulations.

I have a built model in spaceclaim and design modeler. Need to validate it based on the experiment carried out. The model includes geometric imperfections, resudual stress. I have tests done for 900mm, 1200m and 1500mm compression angles. Need to parameterise this model to achieve the same values for length as the experiment as well as go off scale. The results of the experiment include buckling of the angle iron when compressed by a certain value in the testing machine. The aim is to obtain the lateral displacement at the centre of the bar and the value of the critical force that corresponds to this. It is important that the model represents these results as closely as possible. The task is quite simple. And having completed it, there would be another task with a complex model that was a...

I'm searching for a skilled CFD engineer who is proficient in using ANSYS Fluent for conducting in-depth fluid flow analysis. The primary goal of this project is to perform a detailed analysis, providing comprehensive data and insights. Key responsibilities include: - Conducting CFD simulations using ANSYS Fluent - Ensuring the simulation captures all relevant fluid dynamics phenomena - Providing a comprehensive analysis report with detailed data The ideal candidate should have: - Proven experience in CFD simulations, specifically using ANSYS Fluent - Strong understanding of fluid dynamics and related concepts - Ability to generate detailed and comprehensive analysis reports - Strong attention to detail and an analytical mindset. If you meet these requirements,...

I need a proficient ANSYS expert to assist in setting up a structural analysis simulation. Your role will primarily focus on: - Building a model within ANSYS that accurately represents a simple structure. - getting some solution and get the pdf

I'm in need of a skilled ANSYS Maxwell specialist to help with the simulation of an electric arc. Your task will involve: * Working on a basic model already made * Conducting the simulation The ideal candidate would have a deep understanding of electric arcs and hands-on experience with ANSYS Maxwell. We don't need to go into great depth, a basic model will suffice for this project. Let's create a straightforward but informative simulation!

I'm seeking a skilled professional who is well-versed with Ansys Fluent to conduct airflow analysis on a single-flue chimney. The purpose of the project is to comprehensively assess the airflow within the structure. While it is crucial to accurately determine the chimney's airflow behavior, a basic assessment without considering turbulence considerations will suffice for this project. Ideal candidates will have a strong background in fluid dynamics simulations and hands-on experience using Ansys Fluent. Proficiency in interpreting and summarizing complex airflow data will also be beneficial.

I am seeking a freelancer to undertake an analysis and design optimization of a truss structure, using ANSYS software and genetic algorithm. This is based on criteria provided in attached articles. Key deliverables include: - Optimization of material usage - Enhancement of load capacity - Management of stress distribution in the design The main objective of this project is to compare different analysis methods and their results. This is an urgent project requiring immediate commencement. Expertise in Structural Engineering, ANSYS, and algorithm optimization is essential. Preferred candidates would have proven experience in similar projects, particularly in comparing and evaluating analysis methodologies. A keen eye for detail and capability to draw meaningful conclusion...

I'm currently on the lookout for a specialist in COMSOL simulations, with profound understanding and experience, particularly in the field of biomedical applications of microneedles. The aim is to correct and resolve issues pertaining to the file, focusing on the penetration of the microneedle into the skin. The essentials of your role will be: - Evaluating the existing files and rectifying the errors. - Accurately simulating the microneedle's interaction with the skin. Requirements for this project: - Extensive experience with COMSOL simulation software. - Detailed knowledge in biomedical engineering, particularly microneedles. - Ability to accurately simulate physical interactions and provide relevant results. The primary outcome of this project is an error-f...

I'm seeking an experienced engineer or designer who can develop a top-tier alloy rim for my sedan, with the primary goal of enhancing the vehicle's overall performance. Key Areas: - Durability and Strength: The rim should be able to withstand the pressures of regular road use, ensuring longevity and minimal maintenance. - Weight Reduction: A crucial aspect of the design is to minimize the weight of the rim, contributing to improved handling and maneuverability. - Heat Dissipation: Effective heat dissipation is another essential feature to be incorporated into the design, potentially leading to enhanced braking performance. The ideal candidate should have a strong background in mechanical engineering or product design, with a proven track record in alloy rim development. Previou...

I am looking for expert who can perform Ansys modal analysis for a small mechanical structure. This is to identify resonant frequencies and extract mode shapes.

I'm currently on the lookout for a specialist in COMSOL simulations, with profound understanding and experience, particularly in the field of biomedical applications of microneedles. The aim is to correct and resolve issues pertaining to the file, focusing on the penetration of the microneedle into the skin. The essentials of your role will be: - Evaluating the existing files and rectifying the errors. - Accurately simulating the microneedle's interaction with the skin. Requirements for this project: - Extensive experience with COMSOL simulation software. - Detailed knowledge in biomedical engineering, particularly microneedles. - Ability to accurately simulate physical interactions and provide relevant results. The primary outcome of this project is an er...

I am currently working on a project that involves designing a spar structure for an aerospace application. I require the expertise of a freelancer to perform a detailed stress analysis using ANSYS. Key Responsibilities: - Conduct a comprehensive stress analysis on the spar structure. - Ensure the analysis is geared towards aerospace standards and requirements. Ideal Skills & Experience: - Proficiency in ANSYS software, specifically in performing detailed stress analysis. - Prior experience in aerospace engineering, particularly in spar structure design. - Strong understanding of industry-specific requirements and standards.

I'm in need of an expert who can perform Ansys modal analysis for a small mechanical structure. This is to identify resonant frequencies and extract mode shapes. Key Responsibilities: - Conduct Ansys modal analysis for a small mechanical structure (alluminium plate) - Identify resonant frequencies and extract mode shapes - Ensure the structural stability of the analyzed system Ideal Skills and Experience: - Proficiency in Ansys software, particularly in conducting modal analysis - Strong background in mechanical engineering or related fields - Experience in identifying resonant frequencies and extracting mode shapes - Ability to ensure structural stability The freelancer should have a good understanding of how to approach the analysis to provide accurate resul...

I require a proficient Ansys Fluent user to conduct a study on the aerodynamic characteristics of the DrivAer model with the estate-back form: - Mesh independence study of baseline model, using Spaceclaim to prepare geometry and defeature it before meshing. Study must use symmetry to conduct the simulations over half of the body of the car in order to save time and computational costs. - Design of Experiment for a Roof Spoiler: Using three geometric parameters for the shape and position of the spoiler, which will each be tested at three different values (for a total of nine simulations), with the effects of adding the spoiler compared to the baseline model. - Design of Experiment for a Rear Diffuser: Similar to the above, but this time for the purpose of determining the design of a...

I'm in need of an urgent literature review on the subject of nanof...summary of current research in the field, focusing on the role of nanofluids in heat transfer enhancement. - Specific attention to the use of Finite Element Method in Computational Fluid Dynamics (CFD). - In-depth analysis of experiments conducted by researchers in the field, especially those utilizing nanofluids for heat transfer enhancement. - Familiarity with simulation software such as COMSOL or ANSYS would be a definite plus. - The ability to deliver this project as soon as possible. Please only apply if you have the required expertise and can commit to delivering this project promptly. You are required to provide article sources and trusted ones only, the same to be provided with the submissio...

I have a critical need for an individual skilled in using ANSYS HFSS for 3D electromagnetic modeling. The main task would be to model and simulate a Frequency Selective Surface (FSS) bandpass filter. Key responsibilities would include: - Careful determination and configuration of the frequency range and center frequency. - Adjusting the passband bandwidth and achieving minimal insertion loss. - Ensuring the bandpass filter operates efficiently within a specified frequency range. Ideally, you'll have a strong grasp of electromagnetic theory, excellent skills in using HFSS, and a sound understanding of filter design. Having experience in bandpass filter design would be a distinct advantage. Please make your bid on this project, stating your experience.

I need a freelancer with COMSOL expertise to help me simulate the fluid dynamics within my 3D electrolyzer. Key Requirements: - Utilize COMSOL: Proficiency in COMSOL Multiphysics software is essential for this project. Your abilities with this tool will be paramount to our success. - Fluid Dynamics Focus: The simulation should primarily focus on fluid dynamics within the electrolyzer. You'll need to ensure the simulation is accurate and reliable, so prior experience in similar projects would be a strong asset. - Detail Level: The final result should include basic flow patterns. Please bid only if you have strong expertise in COMSOL, particularly in the context of fluid dynamics simulations.

I am seeking an expert in ANSYS to assist me with a dynamic structural analysis project. Requirements: - Proficiency in ANSYS software, particularly in structural analysis. - Previous experience working specifically with steel structures. - Ability to perform a dynamic response analysis under varying loads. Your task will be to simulate the behavior of a steel structure under various dynamic loads. The analysis should provide detailed insights into the structural response. The final report should outline the behavior and safety of the structure under these conditions. Your critical analysis and insights in the report will be essential. Ideal skills and experience: - Proficiency in ANSYS software - Strong background in structural analysis - Previous experience with ...

I'm seeking a qualified freelancer to execute a design simulation for an efficiency-focused spiral wind turbine. This project will involve: 1. Efficiency analysis: You will need to simulate the efficiency of energy production of the turbine base...the efficiency of energy production of the turbine based on the technical specifications that I provide. 2. Aerodynamics evaluation: The simulation should allow us to understand how the unique spiral design influences the turbine's aerodynamics. 3. Structural integrity: Underlying stress and strain on the structure needs to be analyzed. The ideal freelancer for this role is well-versed with ANSYS, SolidWorks Simulation, and Matlab. I'm looking for someone who can deliver precise, insightful results to guide our next step...

I'm working on a project that requires deep expertise in the electromagnetic analysis aspect of ANSYS Maxwell. Key Requirements: - Strong background and practical experience in ANSYS Maxwell for electromagnetic analysis. - Ability to interpret and translate the analysis results into actionable insights. - Past experience with similar projects is a huge plus. Please note that the application area of the analysis will be discussed in more detail with the selected candidate.

I'm looking for a freelancer who can execute an electronic simulation using Ansys Maxwell 3D for my project. The task primarily involves stimulating the following parameters: - Coupling coefficient - Mutual inductance - Quality factor - Efficiency - Coil My project about wireless charging for autonomous underwater vechiles and I charge it with IWPT (inductive contactless power transfer) which depend on charging power by coils so I need to do simulation for optimum coil and compare it with another 2 coils which my optimum coil will be on the pdf I send to you and another to coils will be ( coaxial coil and circular arc coil) so I need simulation to give me results for optimum coil looks like the results and with it results for 6 factors which will be (Quality factor, efficie...

I am seeking an expert in ANSYS CFX, ANSYS Fluent, CATIA, and Solidworks to assist with optimizing my current project. Your responsibilities will include: - Meshing - Simulation setup - Post-processing Focus will be primarily on analysis and optimization. Advanced skills in all four software packages is required to help achieve the best possible results. A thorough understanding of each tool's functionalities is key as the chosen candidate will take full charge of the optimization process. This task will require robust problem-solving skills, keen attention to detail, and unparalleled proficiency in these specific software. If you specialize in these areas, I look forward to hearing from you.

As we embark on improving our room design, we're seeking an Ansys expert to assist in drafting the room layout using SpaceClaim. The purpose of using this software application is to optimize our indoor air quality and design efficiency. The primary goal is to enhance the current indoor air quality. We are particularly interested in the implementation of ventilation improvements that will adequately reduce airborne transmission. As the ideal candidate, you should have: - Extensive experience with Ansys and SpaceClaim for air flow simulations and room layout drafting. - A solid understanding of room design optimization and energy efficiency analysis. - Proven experience in implementing methods that enhance indoor air quality, specifically in ventilation improvement. - A ...

...specialized in Ansys for in-depth assistance with a non-linear dynamic structural analysis project. Key specifications include: - Thorough evaluation of metal components via non-linear dynamic analysis in Ansys. - Facilitate an understanding of how metal components withstand stress, strain, and other external forces under non-linear conditions. - Generation of result-driven simulation reports and recommendations for modification, if any. Ideal skills and qualifications: - Proven experience with structural analysis in Ansys. - Deep knowledge of non-linear dynamic analysis. - Familiarity with the properties and functionality of metal components. - Ability to deliver accurate results in a timely manner. Overall, the successful freelancer will not only possess an...

I'm in need of a skilled freelancer who can create an Ansys model for an electric vehicle battery design. The primary focus will be on thermal management and electrical configuration, so experience in these areas is crucial. Key Requirements: - Create an Ansys model for a battery designed for electric vehicles. - Expertise in thermal management and electrical configuration within Ansys. - Ability to simulate the behavior of the battery in different conditions. - Provide recommendations for optimizing the thermal and electrical performance of the battery. Ideal skills and experience for this job: - Strong background in Ansys software, particularly in the field of battery design for electric vehicles. - Experience in thermal management and electrical config...

I am seeking a CFD professional with extensive experience in both ANSYS and SolidWorks to assist me with running a simulation for a water wheel turbine system. The primary goal of this simulation is to optimize the turbine's efficiency. Key tasks include: - Setting up and executing the simulation in SolidWorks 2020 - Analyzing results to identify potential inefficiencies and areas for improvement Ideal candidates should have: - Proficiency in ANSYS and SolidWorks, as per the versions specified - A proven track record in CFD simulations - Experience in optimizing turbine efficiency would be a significant advantage - Strong analytical skills to interpret simulation data accurately - Excellent problem-solving capabilities If you are confident in your abilities in this ar...

I require an advanced user of Ansys. You'll be dealing mostly with structural mechanics simulations and analysis. An understanding of explicit dynamics is ideally needed. Your tasks will include: - Carrying out simulation and analysis tasks - Working specifically with structural mechanics - Handling intermediate complexities like explicit dynamics A strong theoretical and practical knowledge of Ansys in structural mechanics is essential, and previous experience with intermediate level complexities will make you a stand-out candidate.

In need of a proficient ANSYS and/or SolidWorks user to assist with a medium-sized solar PV/Thermal Project, between 10kW and 100kW. The ideal candidate has previous experience with solar design and is skilled in creating detailed component designs. The successful freelancer will be providing: - P&ID diagrams -Electrical and control system schematics - Plant layout drawings - New and off the shelf component designs for the project This is a solar PV/Thermal technology. HVAC experience is a plus. Familiarity with SolidWorks is a bonus, but not necessary. Looking for comprehensive work and attention to detail. More details can be provided following a Non-disclosure agreement (required).

I'm in need of a skilled FEA analyst who can help in my non-linear analysis in Ansys. I already have the software and material characteristics as well as parameters but the result is not project specifically focuses on material non-linearity, with rubber as the primary material type. The aim of the analysis is to examine the displacement versus reaction at a specified deflection. Key Points: - FEA analysis in Ansys - Material non-linearity focused on rubber - Investigating displacement vs reaction at a specified deflection Ideal Skills: - Proficiency in Ansys software - Strong background in FEA analysis - Experience with material non-linearity - Previous work involving rubber materials would be a plus

I am currently seeking an experienced Ansys Discovery software user to create a detailed, 3D model of a superconducting cable. The primary goal of this model is to simulate and analyze the thermal properties of the cable. In particular, I am interested in the Liquid Nitrogen flow within the cable and its impact on the cable's thermal performance. Key Tasks: - Building a comprehensive 3D model of the superconducting cable using Ansys Discovery software - Running simulations to analyze the thermal behavior of the cable - Focusing especially on the Liquid Nitrogen flow and its implications on the cable's thermal properties Desired Outcomes: - Evaluation of efficiency of high-performance multilayer thermal insulation - Understanding the impact of the concentric spacer...